Content |
The challenge when using a condenser microphone with a preamp pedal, direct box or stage amp is that most of these only have unbalanced inputs. And as most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.
The SB-48UB is a single channel phantom power generator that converts the power from a 15VDC supply to 48 Volts for use with a condenser microphone or active direct box. Inside, the SB48-UB converts the signal to both a lo-Z balanced XLR output and a hi-Z unbalanced ¼" out. Both outputs may be used concurrently whereby the XLR could feed the PA while the ¼" out could feed a stage amp or pedalboard
| PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC,2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box | Adam Hall Connectors 4 STAR A JF3 MM3 Adapter 6.3 mm jack stereo female to 3.5 mm jack stereo male
Our adapter series consists of little helpers and some "must-have's", like the 4 STAR A JF3 MM3. With this adapter you can change a 6.3 mm jack plug to a 3.5 mm minijack. Some earphones use 6.3 mm jack plugs, but some computers only have minijack socket. Here is your solution.
Product type
Plugs and Connectors
Gender of connector 1
female
Gender of connector 2
male
|
- No software installation required, making it quick and easy to use.
- Energy efficient and no external power adapter required.
- Connect an HD source (Apple TV, game console, digital TV box, Blu-ray player, etc.) with an HDMI output to a projector or TV via the SCART or RCA input.
- Convert an HDMI signal (720p/1080p) to an analogue composite signal with stereo audio.
- With built-in NTSC/PAL selector switch.
The Connect HA13 converts an HDMI signal to an RCA/SCART signal. This enables you to still connect devices that do not have the same connections. This HDMI converter can be used to connect, for example, your decoder (with an HDMI connection) to your TV (which only has an RCA/SCART socket).
Connections
|
|
AV input |
1 x HDMI |
AV output |
3 x RC (video, L/R audio) |
Video
|
|
HDMI input resolution |
480i@60 Hz, 480p@60 Hz, 576i@60 Hz, 576p@60 Hz, 720p@60 Hz, 1080i@60 Hz, 1080p@60 Hz |
RCA output resolution |
480i and 576i |
Video systems |
PAL and NTSC |
Audio
|
|
Audio input |
Stereo |
General
|
|
Dimensions (h x w x d) |
20 x 55 x 66 mm |
Weight |
40 grams |
Ambient temperature |
+0 to +70°C |
Humidity |
10% to 85% |
|
The S-phantom gives you an in the field, on location solution for powering
your condenser microphones that need 48 volt power
FEATURES:
2 Channel 48 Volt phantom power supply
2 Balanced XLR mic inputs
2 Balanced XLR and 1/4? mic outputs
AC adapter included
|
The AKG MPA V L Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch. This product replaces the AKG MPA III L Phantom Power Adapter, which did not have a bass roll-off switch. |
Reviews
There are no reviews yet.