| Content |
The challenge when using a condenser microphone with a preamp pedal, direct box or stage amp is that most of these only have unbalanced inputs. And as most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.
The SB-48UB is a single channel phantom power generator that converts the power from a 15VDC supply to 48 Volts for use with a condenser microphone or active direct box. Inside, the SB48-UB converts the signal to both a lo-Z balanced XLR output and a hi-Z unbalanced ¼" out. Both outputs may be used concurrently whereby the XLR could feed the PA while the ¼" out could feed a stage amp or pedalboard
|
The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm
Output voltage 2 V (1 kHz)
Power supply Phantom 12 - 48 V
Current consumption 2,2 mA
Dimensions d 22 x 52 mm (netto)
Gain 0 dB
| Alctron PS200 Portable 48V Phantom Power Supply for Condenser Microphone Live Broadcast Mic Power Supply
The PS200 is portable, battery-operated, and designed to provide 48V phantom power to any condenser microphone in remote locations
It also features a DC power loop enabling multiple unit operations
Power condenser microphones requiring phantom power
Operates on two 9 Volt alkaline batteries, or the included 9V DC adapter
High-frequency switching power supply to eliminate noise
Utilizes a switching regulator for stable voltage performance
Battery life approx. 10 hours, using one 9V alkaline battery
Package Included:
1 x Power Supply(microphone and battery are not included) | Adam Hall Connectors 4 STAR AT RF2 RF2 Twin Adapter 2 x RCA female to 2 x RCA female
Sound enigeers little helper, such as our 4 STAR AT RF2 RF2 are indispensable for every adapter case. You will be happy to have one if you need a gender-changer all of a sudden.
Product type
Plugs and Connectors
Gender of connector 1
female
Gender of connector 2
female
| Adam Hall Connectors 4 STAR A JF3 MM3 Adapter 6.3 mm jack stereo female to 3.5 mm jack stereo male
Our adapter series consists of little helpers and some "must-have's", like the 4 STAR A JF3 MM3. With this adapter you can change a 6.3 mm jack plug to a 3.5 mm minijack. Some earphones use 6.3 mm jack plugs, but some computers only have minijack socket. Here is your solution.
Product type
Plugs and Connectors
Gender of connector 1
female
Gender of connector 2
male
|
- 12 V / 48 V switchable
- 2 XLR inputs
- 2 XLR outputs
- Operating voltage: 12 V / 150 mA (via enclosed power supply unit) or 2x 9 V batteries
- Dimensions: 143 x 93 x 45 mm
- Weight: 485 g
|
Reviews
There are no reviews yet.