Content |
The challenge when using a condenser microphone with a preamp pedal, direct box or stage amp is that most of these only have unbalanced inputs. And as most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.
The SB-48UB is a single channel phantom power generator that converts the power from a 15VDC supply to 48 Volts for use with a condenser microphone or active direct box. Inside, the SB48-UB converts the signal to both a lo-Z balanced XLR output and a hi-Z unbalanced ¼" out. Both outputs may be used concurrently whereby the XLR could feed the PA while the ¼" out could feed a stage amp or pedalboard
| Adapter bolt for loudspeaker flanges with ø 36 mm. Used to screw into mounting bracket M20. The material is galvanized steel.
Specifications
Height: |
50 mm |
Material: |
steel |
Tube end(s): |
diameter 35 mm, threaded bolt M20 |
Type: |
zinc-plated |
Weight: |
0.4 kg |
|
PHP20 is a 2 channel Phantom supply for condenser microphones or other equipment,
with the possibility to change output voltage from 12Vcc to 48 Vcc.
SPECIFICATIONS:
Input: 2 female Cannons
Output: 2 male Cannons (+2 back links)
Output voltage: 12/48Vcc.
Controls: ON led. 2 switches 12/48 Vcc
Power: 9Volt batteries
Ac/dc adapter 12 Vcc
Dimension: 130 (W) 105 (D) 85 (H) mm
|
The S-phantom gives you an in the field, on location solution for powering
your condenser microphones that need 48 volt power
FEATURES:
2 Channel 48 Volt phantom power supply
2 Balanced XLR mic inputs
2 Balanced XLR and 1/4? mic outputs
AC adapter included
| The MX1BP is a battery-powered preamplifier designed to be used with Microflex? or other condenser microphones. It allows use of these microphones in situations where phantom power is not available. Features * 4-pin Tini Q-G? connector allows use with a variety of condenser microphones * Power LED Indicator indicates power status to the preamplifier * Mute/On switch attenuates microphone without turning off preamplifier * Belt clip allows mobility while using lavalier and headset microphones * Preamplifier operates on 9 V battery or phantom power * Features 3.7 m (12 ft) cord with attached male XLR connector |
- No software installation required, making it quick and easy to use.
- Energy efficient and no external power adapter required.
- Connect an HD source (Apple TV, game console, digital TV box, Blu-ray player, etc.) with an HDMI output to a projector or TV via the SCART or RCA input.
- Convert an HDMI signal (720p/1080p) to an analogue composite signal with stereo audio.
- With built-in NTSC/PAL selector switch.
The Connect HA13 converts an HDMI signal to an RCA/SCART signal. This enables you to still connect devices that do not have the same connections. This HDMI converter can be used to connect, for example, your decoder (with an HDMI connection) to your TV (which only has an RCA/SCART socket).
Connections
|
|
AV input |
1 x HDMI |
AV output |
3 x RC (video, L/R audio) |
Video
|
|
HDMI input resolution |
480i@60 Hz, 480p@60 Hz, 576i@60 Hz, 576p@60 Hz, 720p@60 Hz, 1080i@60 Hz, 1080p@60 Hz |
RCA output resolution |
480i and 576i |
Video systems |
PAL and NTSC |
Audio
|
|
Audio input |
Stereo |
General
|
|
Dimensions (h x w x d) |
20 x 55 x 66 mm |
Weight |
40 grams |
Ambient temperature |
+0 to +70°C |
Humidity |
10% to 85% |
|
Reviews
There are no reviews yet.