RADIAL Tonebone Bassbone V2 Bass Preamp

Simply stated, the Bassbone V2 is a bass command center. Connect any two basses and seamlessly toggle between them using a footswitch. Each channel has a separate level control to balance the two instruments and is augmented with a unique EQ that enables you to adjust the tone to match your bass amp. In fact, the passive-interactive EQ is so powerful, you can toggle between channels to emulate switching from a P-Bass to a Rickey using the same bass! A special PZB booster adds yet another dimension - allowing you to connect a piezo, such as used on an upright bass when doubling.

With the Bassbone V2, you get even more: A boost footswitch can be used to either engage a power booster for solos or can be assigned as a mute switch for quiet on-stage tuning. A third footswitch lets you activate the effects loop which is equipped with a wet-dry control to retain the tone of the original instrument and then mix-in as much of the effect as you like. The effects can be assigned to either channel or both. Once processed, you can send your sound to a stage amp, tuner and to the PA system using the built-in Radial DI box.The Bassbone V2 is a power-packed bass preamp that combines on-stage efficiency, amazing tonal control and superb audio performance in a compact box. This makes it the ideal front end for both live and studio recording. Comes equipped with 15VDC power supply.  

Stellar Sound

Delightfully Simple Operation

Sound Value

POD Studio™ GX combines the stunning sounds of POD Farm™ plug-in with a powerful USB interface.POD Farm plug-in features every model necessary for pro-sounding tracks. Over 80 immortal and fully adjustable guitar amps, bass amps, preamps and more, from vintage classics to must-have modern monsters, are packed inside to deliver legendary POD tone to your DAW.GX is a rock-solid interface thatʼs really easy to use. It features a super-quiet 1/4-inch guitar input, a 1/8-inch headphone/line output and a volume knob for instant, straightforward recording     Main Features  

• Lowest noise for recording guitar (12dB more dynamic range than similar interfaces)
• Exclusive latency-killing ToneDirect™ monitoring
• Up to 24-bit/96 kHz recording
• POD Farm plug-in (Mac® AU/RTAS®/VST® and Windows® RTAS®/VST®)
• 18 immortal guitar amps with 24 cabs
• 5 thumping bass amps with 5 cabs
• 29 stunning stompboxes and studio effects
• 6 warm and colorful mic preamps
• Ideal for use with Ableton® Live, Cubase®, Logic®, Garageband®, Pro Tools®, Cakewalk® and other pro recording platforms
• Includes Ableton® Live Lite Line 6 Studio Edition 8-track recording software and RiffWorks™ T4 recording software for instant pro recording and idea capture right out of the box
• USB 1.1 and 2.0 compatible

Kick your vocals into high gear with VoiceTone Harmony-G XT. With improved harmony technology and reverb from its big brother VoiceLive 2, Harmony-G XT will improve your tone and surround your voice with pro effects and vocal harmony.     New Features

A wealth of new features makes Harmony-G XT a better-sounding and easier-to-use vocal effect footpedal.

• Improved NaturalPlay guitar-controlled harmony algorithm
• Front-of-house quality reverb algorithm and selection of styles from VoiceLive 2
• Selection of four overdub-style doubling effects with two more doubling voices available
• Reworked FX presets offer even more utility across music styles
• USB connection for easy software updates, tips, and preset backup using the included VoiceSupport applet
• Adaptive harmony gate added to Tone for a cleaner mix
• Easy manual selection of Scale & Key for singers without an instrument or horn players

Standard Features

All the features that made the original Harmony-G such a success.

• Listens to guitar and voice to create correct harmony parts automatically
• Tone switch smooths vocals with adaptive Live Engineer Effects
• 18 combinations of reverb, delay and µmod shared by vocal and guitar input
• 10 presets available, each with A/B options
• Harmony interval selection includes 3rds and 5ths above and below, octave up and down, and the unique Bass interval
• Stereo or mono configurable output
• Clean, studio quality mic preamp with phantom power and XLR input
• Guitar signal can be mixed in and share reverb or passed through to separate amplifier

The Turnip Greens is a compact multi-effect pedal combining the award-winning Soul Food Overdrive and Holy Grail Max Reverb. The Soul Food delivers transparent sounds starting with clean boost and progressing all the way to intense overdrive. Itʼs equally adept at adding punch to a playerʼs tone, pushing an amp into saturation or in front of other dirt pedals driving them into new worlds of distortion.


The Holy Grail Max provides four carefully crafted reverbs: Spring, Hall, Plate and Reverse. A newly designed analog wet/dry control yields a constant volume curve as the Blend knob is turned from fully dry to fully wet, while also keeping the dry signal analog through the pedal.
The pedalʼs left side features the Holy Grail Maxʼs controls and independent footswitch while the right side is dedicated to the Soul Foodʼs controls and footswitch.
A toggle effect-order switch, located in the middle of the Turnip Greens, selects whether the overdrive or reverb is first in the effects chain. Send and Return jacks let the player insert effects into the signal path between the two. With the switch to the right the signal chain is Soul Food > Holy Grail Max which produces a traditional sound familiar to most players. In the left position the signal chain is Holy Grail Max > Soul Food. Now the reverb is boosted by the overdrive which, when used in conjunction with pedals in the effects loop, can create very lush textures.
The Turnip Greens features an internal switch that lets the player select between true bypass or buffered bypass for the Soul Food section. In true bypass mode, when the Turnip Greens is set to bypass, the input jack is connected directly to the amp jack and nothing else. In buffered bypass mode, the bypass signal passes through a high-quality buffer circuit before it is output from the Amp jack.


The new Turnip Greens comes standard with an EHX 9.6-Volt/DC200mA AC Adapter.

The Line 6 Helix multi-effects floorboard processor reaches far beyond anything you've ever experienced. It can be a great addition to your rig, a streamlined controller for your existing system, or an incredible-sounding guitar interface for recording in the studio — it can even replace your entire effects setup! Equipped with Line 6's new HX modeling engine, Helix will let you hear brand-new models of modern and vintage amps, cabs, mics, and effects — all designed to sound and feel amazing. And your rig-integration options are limitless, with Helix's astoundingly comprehensive I/O and routing capabilities. Line 6 has long been at the front of the modeling revolution, and Helix is the professional guitar processor Line 6 was destined to make.