| Content |
- Unique pre-drive circuit for high gain amps
- Super-hot +23dB Class-A power booster
- Pre-Drive and Boost can be combined
- Built-in effects loop activates with booster
The Regency™ is a new type of pedal designed specifically to pre-emphasize the gain stage of today's high gain amps. It features two circuits that may be used independently, or combined together to add punch, harmonics and sustain without losing articulation or oversaturating the guitar signal.
The Pre-Drive can be thought of as a pre-distortion overdrive that can be set with just enough grit to add sustain, yet with enough gain to push the front end of the amp for more natural sustain and harmonics. It features an adjustable drive to set the amount of distortion, a tone control for tone shaping plus a drive level control to set the output volume. A 3-position Low-Mid switch rounds out the sonic structure to better focus bottom end to match your amp and guitar.
The Booster is a super-hot, 100% discrete, pure Class-A power booster that delivers up to +23dB of clean gain. This can be used for soloing or hitting the front end of a smaller amp to cause it to break up prematurely. To add even more excitement to the performance, a built-in effects-loop allows a series of pedals such as a delay or chorus to be added to the signal chain when the boost footswitch is engaged. This speeds the transition from rhythm to lead when soloing, delivering a more efficient and professional performance on stage.
The Pre-Drive and Booster are each activated with their own footswitch and both can be combined to push your amp to extremes. The actual switching is done using gold-contact sealed relays for true-bypass performance.
The Regency… a new type of pedal that is fit for a king!
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
| Nominal Input Level | -20 dBu |
|---|
| Input Impedance | 1 M ohms |
|---|
| Nominal Output Level | -20 dBu |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -92 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 50 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
|
The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.
The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.
The main features of the Digitech XHP HYPER PHASE include:
- Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
- 7 Different phase types
- Speed, Depth, Regen, and Mode controls
- Triggering and step capability
- Stereo outputs with switchable CIT Cabinet Modeling
| Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
- BOSS' best flanging effects in a compact pedal
- New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
- Momentary mode turns flanging on instantly
- Tap tempo adjustable via pedal
- Independent Guitar and Bass inputs and stereo outputs
- BOSS 5-year warranty
| Wah-Wah Pedal HB-01 hell-babe
The HELL-BABE HB01 is unlike any wah you’ve ever stepped on, offering a tremendous array of tone-sculpting options. You get everything from “old-school” wah to the most up-to-date sounds, all in one mesmerizing effects pedal. Add to that optical control that does away with noisy pots, an adjustable spring mechanism and tunable boost, and this babe’s a contender! The HELL-BABE will add new dimension and depth to your artistic expression.
What’s So Great About the HELL-BABE?
First of all, the HB01’s heel-down Range control provides low frequency adjustment that can be swept from 440 Hz down to 250 Hz, making the HB01 the ideal companion for either guitar or bass. For custom-tailoring the toe-down frequency range, the HELL-BABE features a Fine control, allowing you to adjust the frequency sweep as high as 2.2 kHz.
Volume Boost
You can even dial in a powerful volume Boost (up to +15 dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal-like effects.
|
Reviews
There are no reviews yet.