| Content | To repair JBL compression drivers : 376, 2440, 2441, 2445H, 2446H, 2447H, 2450H, 2451H.
To repair Radian compression drivers : 950PB and 951PB.
- For 4" voice coil diameter
- 8 Ohm
- Highest quality 0.008 mm heat-formed aluminium alloy diaphragm with Mylar surround.
- Replacement for diaphragms from JBL and Peavey
- Significantly lower distortion rate
- Suitable for the following drivers: Radian 950 PB, JBL 2445, 2446, 375, 2440, 2441, 2447, 2450, 2451, Peavey models 44T and 44XT, etc.
General
|
| Product type |
Diaphragm |
| Brand |
Radian |
| Reference |
1245 |
Informations
|
| Nominal impedance |
8 ohm |
Datas
|
| Weight |
~0.15 kg |
| Original JBL D8R2431 Diaphragm to repair the 2431H Driver (339894-002X). 8 ohm
Diaphragm Comes with Ferrofluid and Allen Key.
Here is the list of some cabinet model use:
AE Series: AM6200/64-WH, AM6200/95-WH, AM6212/00-WH, AM6212/64-WH, AM6212/95-WH, AM6215/64-WH, AM6215/95-WH, AM6315/64-WH, AM6315/95-WH, AM6340/64-WH, AM6340/95-WH
Precision Directivity Series: PD5200/43-WH, PD5200/64-WH, PD5200/95-WH, PD5212/43-WH, PD5212/64-WH, PD5212/95-WH, PD5322/43-WH, PD5322/64-WH, PD5322-95-WH, PD743, PD764
SRX Series: SRX712M, SRX715/F, SRX738/F VLA Series: VLA301, VLA301H, VLA601, VLA601H, VLA901, VLA901H
Vertec Series: VT4888, VT4888DP-AN/CN/DA |
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
| |
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. |
Reviews
There are no reviews yet.