CB Series ? CB 1402Rugged Power Amplifier PresentationThe CB Series is a medium cost ensemble of amplifiers covering the most used power specifications. The four offered models share the well proven RAM Audio topology for ease of servicing. The latest breakthrough in component assembly and manufacturing processes are present in this new Series. All the […]
Presentation The CB Series is a medium cost ensemble of amplifiers covering the most used power specifications. The four offered models share the well proven RAM Audio topology for ease of servicing.
The latest breakthrough in component assembly and manufacturing processes are present in this new Series.
All the models are equipped with high efficiency toroidal transformers and long life capacitors in a common, sturdy two U steel chassis.
The sum of these specs put them on the front row of cost/effectiveness for all fixed and mobile uses.
Features 2U heavy duty steel chassis Modular construction for easy servicing Symmetrical layout for even weight distribution High efficiency toroidal main transformer Oversized, high energy, linear power supply Dual, parallel or bridged operation Twin balanced inputs (Neutrik XLR connectors) Three dedicated Speakon outputs High quality components used throughout Efficient back to front cooling Dual, continuously variable speed axial fans Fault, signal, and clip indicators Functional integrated front panel design Heavy duty alloy carrying handles
Protections Calibrated mains fuse Independent channel supply fuses Input signal muting at turn on Continuous short-circuit protection (CSP) Thermal overload protection Intelligent clip-limiter (ICL) Progressive Ramp input signal Currentless relay operation (CRO)
Technical Specifications Output Power Continuous Average Power RMS, 1kHz, 1.0%THD+N
Presentation The CB Series is a medium cost ensemble of amplifiers covering the most used power specifications. The four offered models share the well proven RAM Audio topology for ease of servicing.
The latest breakthrough in component assembly and manufacturing processes are present in this new Series.
All the models are equipped with high efficiency toroidal transformers and long life capacitors in a common, sturdy two U steel chassis.
The sum of these specs put them on the front row of cost/effectiveness for all fixed and mobile uses.
Features 2U heavy duty steel chassis Modular construction for easy servicing Symmetrical layout for even weight distribution High efficiency toroidal main transformer Oversized, high energy, linear power supply Dual, parallel or bridged operation Twin balanced inputs (Neutrik XLR connectors) Three dedicated Speakon outputs High quality components used throughout Efficient back to front cooling Dual, continuously variable speed axial fans Fault, signal, and clip indicators Functional integrated front panel design Heavy duty alloy carrying handles
Protections Calibrated mains fuse Independent channel supply fuses Input signal muting at turn on Continuous short-circuit protection (CSP) Thermal overload protection Intelligent clip-limiter (ICL) Progressive Ramp input signal Currentless relay operation (CRO)
Technical Specifications Output Power Continuous Average Power RMS, 1kHz, 1.0%THD+N
Required AC Mains 230V/50Hz or 120V/60Hz 1/8 rated power (230V@4ohms) 3.7A
Dimensions W x H x D 483 x 89 x 450 mm 19 x 3.5 x 17.7 in
Weight Shipping: 18.8 Kg - 41.5 Lbs Net: 18 Kg - 39.7 Lbs
Protections Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO
Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 1250 W, 4 Ω - 900 W, 8 Ω - 550 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 2450 W, 4 Ω - 1400 W, 8 Ω - 700 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 2800 W, 8 Ω - 1800 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +5.1 dBu (1.39 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class H Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 16.3 kg (35.9 lbs)
- Power levels matched to the most popular speakers used by entertainers - Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems - Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source - Outputs: Speakon(R) combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems - Minimum depth chassis (10.1“/257 mm) fits in compact, inexpensive effects racks - Lightweight - GX7 is only 15.5 lbs (7 kg) - Detented gain controls for precise setting and matching of sensitivity - GuardRail(TM) automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show - Front panel LEDs monitor Power, Signal and Clipping - Subwoofer/Satellite crossover built-in - 230V 16.5 lbs (7.5 kg)
Stereo Mode: - 8 Ohms / both channels driven: 500 Watts - 8 Ohms / single channel driven: 600 Watts - 4 Ohms / both channels driven: 700 Watts - 4 Ohms / single channel driven: 850 Watts
Distortion: - 8 Ohms: less than 0.05% - 4 Ohms: less than 0.1%
Dimensions and Weight in Packaging Shipping Weight: 31 lbs Shipping Dimensions: 24 x 15 x 7 in
Phonic\'s MAX 2500 Power Amplifier provides 1500 Watts of power at 8 ohms (bridge mono) or 750 Watts at 4 ohms (stereo)- ideal for medium to large-size clubs, churches, auditoriums and more. Input to the MAX 2500 amp is achieved via combo connectors that accept both XLR and 1/4\' jacks, and output is achieved through either Speakon?-type connectors or binding posts. The MAX 2500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.