RCF HC 3200: 3200 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS

Original price was: €1,946.79.Current price is: €1,460.09. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%. A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode. The output stage is fully protected against over-temperature, short circuit, […]

 

Read more

This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%.
A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode.
The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.
The integral soft clip limiter protects against damage to the connected loudspeakers.
The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω: 2 x 1600 Watt rms  
Power output stereo 4Ω: 2 x 1100 Watt rms  
Power output stereo 8Ω: 2 x 700 Watt rms  
Power output bridged 4Ω: 3200 Watt rms  
Power output bridged 8Ω: 2200 Watt rms  
Frequency Response: 20 Hz ÷ 20 kHz  
Signal/noise rate: > 102 dB  
Crosstalk: > 65 dB  
Distortion (THD+N):  
Intermodulation:  
Damping factor: 400:1 (8 W)  
Slew rate: 50 V/μS  
INPUT SECTION
Input connector: 2 x XLR balanced, 6,3mm jack unbalanced  
Input sensitivity: 0 / 0.775 dBm/V RMS  
Input impedance: 20.000 kΩ  
Controls: Volume control for each channel  
OUTPUT SECTION
Output connector: 2 x Neutrik Speakon 4 ways  
SYSTEM PARAMETERS
Cooling: Two-speed fan  
Protections: Thermal, temperature, direct current, short circuit, RFI  
POWER REQUIREMENT
Operating voltage: 220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current: 16 A  
Power Consumption: 6500 W  
PHYSICAL SPECIFICATIONS
Height: 132 / 5.19 mm/inch  
Width: 483 / 19.01 mm/inch  
Depth: 455 / 17.91 mm/inch  
Net Weight: 29.5 / 65.03 Kg/Lbs  
SHIPPING INFORMATION
Package height: 200 / 7.87 mm/inch  
Package width: 575 / 22.63 mm/inch  
Package depth: 555 / 21.85 mm/inch  
Shipping Weight: 32.5 / 71.64 Kg/Lbs

 

Weight 32.50 kg

Reviews

There are no reviews yet.

Be the first to review “RCF HC 3200: 3200 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF HC 3200: 3200 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeAMERICAN AUDIO VLP-2500 Power Amplifier 2x1100 Watts removeDYNACORD H-2500 Power Amplifier 1950 Watts removeDYNACORD DSA-8212 2 CHAN POWER AMPLFIER 2X1800W/2Ω - 2X1200W/4Ω - 2X750W/8Ω removeMC2 Audio T2000 POWER AMPLIFIER 2 x 1150w 230V removeELECTRO VOICE CP4000S Compact Precision Series Class-H Power Amplifier 2X1500 WATT remove
NameRCF HC 3200: 3200 W, 2 IN, HIGH CURRENT STEREO POWER AMPLIFIERS removeAMERICAN AUDIO VLP-2500 Power Amplifier 2x1100 Watts removeDYNACORD H-2500 Power Amplifier 1950 Watts removeDYNACORD DSA-8212 2 CHAN POWER AMPLFIER 2X1800W/2Ω - 2X1200W/4Ω - 2X750W/8Ω removeMC2 Audio T2000 POWER AMPLIFIER 2 x 1150w 230V removeELECTRO VOICE CP4000S Compact Precision Series Class-H Power Amplifier 2X1500 WATT remove
ImageELECTRO VOICE CP4000S Compact Precision Series Class-H Power Amplifier 2X1500 WATT
SKUHC3200E003176E009295E009305T2000001737
Rating
Price Original price was: €1,946.79.Current price is: €1,460.09. incl. GR VAT Original price was: €1,000.00.Current price is: €975.00. incl. GR VAT Original price was: €4,690.39.Current price is: €4,498.00. incl. GR VAT Original price was: €1,622.40.Current price is: €1,296.00. incl. GR VAT Original price was: €2,424.19.Current price is: €1,795.51. incl. GR VAT2,331.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%.
A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode.
The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.
The integral soft clip limiter protects against damage to the connected loudspeakers.
The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:2 x 1600 Watt rms 
Power output stereo 4Ω:2 x 1100 Watt rms 
Power output stereo 8Ω:2 x 700 Watt rms 
Power output bridged 4Ω:3200 Watt rms 
Power output bridged 8Ω:2200 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 102 dB 
Crosstalk:> 65 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:400:1 (8 W) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 20.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Thermal, temperature, direct current, short circuit, RFI 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:16 A 
Power Consumption:6500 W 
PHYSICAL SPECIFICATIONS
Height:132 / 5.19 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:455 / 17.91 mm/inch 
Net Weight:29.5 / 65.03 Kg/Lbs 
SHIPPING INFORMATION
Package height:200 / 7.87 mm/inch 
Package width:575 / 22.63 mm/inch 
Package depth:555 / 21.85 mm/inch 
Shipping Weight:32.5 / 71.64 Kg/Lbs

 

VLP Series Power Amplifier - 1100W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD - 700W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD - 2200W RMS @ 8 Ohms, 1K Hz, 1% THD (Bridge Mode, Mono) - Total Harmonic Distortion: Less Than 0.5% (20Hz - 20kHz @ 8 Ohms) - Frequency Response: (+/-05db, @rated output Power, 8 Ohms): 20Hz - 20K Hz - Slew Rate: 20V Per usec - Damping Factor @ 8 Ohm: 450 - Impedance: 20 Ohms balanced / 10 Ohms unbalanced - Cooling System: 2 high speed cooling fans - Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / Limiter - Dimensions (LxWxH): 17.75" x 19" x 3.5" / 453 x 482 x 88mm (2 rm spaces) - Weight: 50 lbs. / 23 Kgs.

The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)

Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo. User's Manual

Amplifier Gain    32 dB Continuous Rated Power (1 kHz, THD 1%) 2Ω    2100 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω    1500 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω    900 Watts Continuous Rated Power (20-20 kHz, THD
Weight32.50 kg23.00 kg14.20 kg17.70 kg23.00 kg8.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 32.50 kg
Weight 23.00 kg
Weight 14.20 kg
Weight 17.70 kg
Weight 23.00 kg
Weight 8.70 kg