| Content |
The NX S25-A is a vented, high output, active subwoofer system where the solid sound of a dual 15” woofer is desired.
This subwoofer is optimally designed for portable or install applications and it is engineered to complement full-range loudspeakers in a wide range of PA applications.
| Features |
|---|
| 1000 Watt Digipro digital amplifier | | 136 dB max spl | | 2x15" woofer, high power 3" voice coil | |
PFC power factor correction
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | | Max SPL: | 136 dB | | | Woofer: | 2 x 15“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 / 110 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, xover / link, frq. cut, phase | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | Stacking fittings | | | Handles: | 4 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 750 / 29.52 mm/inch | | | Width: | 660 / 25.98 mm/inch | | | Depth: | 700 / 27.55 mm/inch | | | Net Weight: | 60.5 / 133.37 Kg/Lbs |
|
|
One of the best ways to fill the room with bass with your PA system is by adding a subwoofer. Mackie's Thump 115S powered subwoofer was designed to boost the low-frequency power and output of a PA system using their Thump Series powered speakers, but it'll work with any system that needs more bass. This sub features a built-in amplifier that sends up to 1400 watts to the 15" low-frequency driver in an efficient bandpass enclosure, creating plenty of bass energy for just about any musical application or venue. Internal protection circuits keep the sub rockin' and safely under control, even when the party gets loud and raucous.
Integrates well
Selectable High Pass Modes with a variable crossover setting optimizes the sub for different system configurations and musical genres. A 2-channel input mixer plus 2 full-range and 2 high-pass outputs offer plenty of wiring and integration options. Convenient, top corner handles help ease the pain when carrying this Built-Like-A-Tank™ sub to and from a gig.
Product highlights:
- powered PA subwoofer
- 15" woofer in a bandpass enclosure
- built-in amplifier: 1400 watts peak
- maximum SPL: 131 dB
- frequency range: 46-150 Hz
- 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
- phase switch and output level control
Other features:
- inputs: 2 XLR
- outputs: 4 XLR (2 full-range, 2 high-pass)
- Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
- Integrated M20-threaded pole mount
- dimensions: 18.13" W x 18.25" H x 25.13" D
- weight: 52.2 lbs.
- warranty: 1 year
- MFR # THUMP115S
What's in the box:
- Powered 15" PA subwoofer
- 6' AC Power cord (IEC 3-prong)
- Quickstart guide
| The Italian Stage S115A 15" Active Subwoofer is ideal for adding powerful yet smooth bass to your live setup. It uses a 15" woofer driven by a 350W RMS class AB amplifier, resulting in 128 peak spl and a 20Hz to 120Hz frequency range. This results in a booming bass sound, that matches precise performance with a punchy sound. The S118A also has a control panel section, with controls for line level, a phase switch, crossover switch - activating a high pass filter for outputs - as well as ground switch.
| manufacturer |
ITALIAN STAGE |
| Warranty |
2 Years |
| Speaker Category |
SubWoofer |
| Speaker Type |
Active |
| Material of manufacture |
Wood Cabin |
| Total Power (Watt) |
350 |
| Woofer diameter (inches) |
15 |
| dB (max spl) |
128 |
| Weight (kg) |
22.5 |
| Frequency response (Hz) |
20 to 120 |
| Colour |
Black |
|
User's manual
LD Systems STINGER SUB 15 A G3
Active 15" bass-reflex PA subwoofer
- Active 15” bass reflex PA subwoofer
- High-efficiency 450 watts RMS digital power stage and 133 dB max. SPL
- 15” custom design woofer for extended low end down to 40 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
STINGER SUB 15 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 15 A G3 is powered by high efficiency Class D amplification with a mighty 450 watts RMS output. It drives a custom designed 15” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 15 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 15 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
15 "
Woofer Size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
450 W
Peak power
900 W
Frequency response
40 - 200 Hz
Max. SPL (peak)
133 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
567 mm
Height
477 mm
Depth
624 mm
Weight
31,9 kg
| LD Systems ICOA SUB 15 A Powered 15" Bass Reflex PA Subwoofer
Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 400-watt RMS or 1600-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you're a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
Product type
PA subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
76.5 mm
Frequency response (-10dB)
36Hz Preset depending
Protection circuits
Excursion Limiter, over voltage, over-current, Peak Limiter, RMS Limiter, thermal overload
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line output connectors
XLR
Operating voltage
100 - 240 V
Power consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
|
Are you looking for a deep and punchy bass in a small pack?
The choice is easy: ART 905-AS.
It is an extremely compact and easy to transport high power active subwoofer, just a bit larger than the 902-AS in order to take the newly designed 15” neodymium woofer for a deeper bass punch.
The cabinet is made in Baltic Birch and heavy duty painted.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | | Max SPL: | 131 dB | | | Woofer: | 15“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 - 120 Hz | | | Protections: | Thermal, rms | | | Limiter: | Limiter | | | Controls: | Volume, phase, xover | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | VDE connector in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 600 / 23.62 mm/inch | | | Width: | 445 / 17.51 mm/inch | | | Depth: | 600 / 23.62 mm/inch | | | Net Weight: | 34 / 74.95 Kg/Lbs |
|
Reviews
There are no reviews yet.