Content |
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
Features
Hard-suspension bass with Kapton spool
High-range horn with thermal overload protection
Integrated high-quality frequency cross-over (not for RSP-18 S)
Sound characteristics geared especially to heavy-bass sounds like hip hop, techno, house & breaks
High-performance reserves
Extremely durable, road-compatible carpeting
Protective metal corners
Large carrying shells made of metal
Sunk-in metal flange for tripods (not RSP-12 M and RSP-30)
Robust front grid
Connections via PA pro speaker cable and 6.3 mm jack
Technical Data
100 watt RMS PA-speaker
Max. capacity: 200 watt
Type: 2-way system
Frequency range: 45 Hz - 20 kHz
Acoustic pressure: 97 dB
Speaker: 25 cm (10“) woofer, mid-range and tweeter
Impedance: 8 ohm
Dimensions: 530 x 375 x 340 mm
Weight: 11.5 kg
|
Made for permanent sound placement.
The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES
10″ 2-way low-profile installation loudspeaker
10″ high-output ceramic woofer with 2″ voice coil for maximum output
1.4″ titanium compression driver provides smooth, consistent high-frequency response
8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
Rotatable center logo allows for clean presentation in all configurations
Convenient terminal strip connectivity saves time and cost
Dual Neutrik parallel connectors
Lightweight, compact and durable 15mm poplar cabinet construction
SPECIFICATIONS
iP-10 10" 2-Way Passive Loudspeaker
Frequency range (-10 dB): 50 Hz - 20 kHz
Coverage pattern: 90° x 50°
Power handling: 200 watts continuous / 400 watts program
Max SPL: 124 dB
Crossover frequency: 3 kHz
Nominal impedance: 8Ω
Height: 20.5 in / 520 mm
Width (Front): 12 in / 310 mm
Width (Rear): 6.8 in / 172 mm
Depth: 13.4 in / 340 mm
Product weight: 26 lb. / 11.8 kg |
- Sealed type speaker with 60W continuous pink noise and 180W continuous program power handling capacity.
- Highly efficient operation at rated sound pressure level of 96dB (1W, 1m).
- Frequency response of 100Hz~20,000Hz and 2.5kHz passive network crossover frequency.
- Two-way coaxial unit with 25cm low- frequency cone speaker and high- frequency CD horn fitted with compression driver (60º horizontal × 60º vertical).
- 1.6mm thick punching net and coniferous plywood enclosure make the speaker especially well-suited for indoor sports facility applications.
- Black, semi-matte urethane-painted coniferous plywood enclosure and black, semi-matte acryl-painted steel plate grille.
- Speaker mounting brackets and speaker mounting bolts included.
- Optional matching MT-S0601 transformer.
Spec. | Enclosure | Sealed type | Power Handling Capacity | Continuous Pink Noise: 60W/Continuous Program: 180W | Rated Impedance | 8 ohms | Sound Pressure Level | 96dB (1W, 1m) | Frequency Response | 100 - 20,000Hz | Crossover Frequency | 2.5kHz (passive network) | Speaker Component | 2-way coaxial unit/Low Frequency; 25cm cone speaker
High Frequency; CD horn fitted with compression driver (60º horizontal × 60º vertical) | Input Terminal | 2-pole M5 screw terminal, pitch between barriers; 12.2mm | Finish | Enclosure; Coniferous plywood, black, semi-mat, urethane paint
Grille; Steel plate, black, semi-mat, acryl paint | Dimensions (W × H × D) | 460 × 310 × 200mm | Weight | Speaker System; 9kg
Mounting Bracket; 2kg | Accessories | Speaker mounting bracket × 2
Speaker mounting bolt × 4 | |
M1001 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M1001 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M1001 wall or ceiling mounted, with reference to the several possible applications. The M1001 has a controlled dispersion and delivers undistorted SPL value above any expectation from such a compact speaker system. The M1001 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded on a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.
General Specs
High Quality 2-way passive loudspeaker 1 x 10" woofer, vented 1 x 1" driver, on 90°x60° CD horn High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver 300W AES power handling Steel Front Grille with robust double mesh polyester clothing Rotatable RCF front logo Installation points are available on the rear panel, top and bottom All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:60 Hz ÷ 20000 Hz Max SPL @ 1m:128 dB Horizontal coverage angle:90° Vertical coverage angle:60° Directivity index; Q:10 System Sensitivity:97 dB Nominal Impedance:8 Ω Power Handling:300 W Peak Power Handling:1200 W Recommended Amplifier:600 W Protections:Dynamic Crossover frequencies:1700 Hz
Inputs/Outputs
Input connector:4-pin EUROBLOCK Height:500 / 19.68 mm/inch Width:265/ 10.43 mm/inch Depth:320 / 12.60 mm/inch Net Weight:13.2 / 29.08 kg/lbs |
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.
The PROMAXX feature-set is matched by the enclosure’s versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet.
Common features:
- bass reflex design cabinet
- 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
- 90°H x 60°V constant directivity horn
- Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles
- Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
- Speakon NL-4 IN and LINK OUT connectors
Code: |
40685 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
90° x 60° HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
50Hz - 24dBoct |
Input connector: |
2 x Speakon NL4 in&throu |
Net Dimension (WxHxD): |
320x550x275 / 12.6x21.6x10.8 mm/inch |
Net Weight: |
8.9/19.62 kg/lb |
Transport Dimension (WxHxD): |
400x630x360 / 15.7x24.8x14.2 mm/inch |
Transport Weight: |
11.4/25.13 kg/lb |
|
Reviews
There are no reviews yet.