Content |
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
|
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
FBT is launching the next step in the PROMAXX range of portable PA enclosures. With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic.
The PROMAXX feature-set is matched by the enclosure’s versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet.
Common features:
- bass reflex design cabinet
- 2 x M10 suspension points, 35 mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
- 90°H x 60°V constant directivity horn
- Front of House or Stage Floor Monitor: with 12°, 40° and 55° monitoring angles
- Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
- Speakon NL-4 IN and LINK OUT connectors
Code: |
40685 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2 coil inch |
High frequency driver: |
1 - 1.4 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
122/127 dB |
Dispersion: |
90° x 60° HxV |
Crossover Frequency: |
1.8 KHz |
Recommended HP filter: |
50Hz - 24dBoct |
Input connector: |
2 x Speakon NL4 in&throu |
Net Dimension (WxHxD): |
320x550x275 / 12.6x21.6x10.8 mm/inch |
Net Weight: |
8.9/19.62 kg/lb |
Transport Dimension (WxHxD): |
400x630x360 / 15.7x24.8x14.2 mm/inch |
Transport Weight: |
11.4/25.13 kg/lb |
| The PS-10 JB-Systems is a compact passive speaker with a woofer 10 "is the perfect choice for small applications where high power is not necessary. It is a versatile device that can be used in different installations, there is even a special holder designed for use as a monitor.
JB-Systems Specification PS-10:
This enclosure is suitable for fixed installation and mobile application, the rugged polypropylene housing provides excellent protection components. SP-10 can be mounted on a stand with a standard speaker connection 35mm and can be mounted easily using the integrated mounting points. And as mentioned earlier, you can use the stand included for use as a monitor. This device also has a sturdy handle for easy transport and rubber feet protect the bottom of your speaker.
- passive Speaker
- 10 "woofer
- 1.35 "compression driver
- Power: 160W RMS, 320W peak
- Impedance: 8 Ohm
- Speakon In / Out
- polypropylene housing
- sturdy handle
- Rubber feet
- Can be mounted on standard stand (35mm)
- Points integrated mounting
- Supplied with bracket for use as a monitor
- Weight: 10.3kg
|
The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications. | MASTER AUDIO SB250 Passive Loudspeaker 2 Way 10" 200Wrms 8 Ohm
- 2-way passive speaker box
- Impedance(Ohm) 8
- Power output 200 W RMS
- ABS box - Woofer 10“, paper cone
- Compression driver,1" titanium diaphragm
- Frequency reponse: 50 - 17KHz (-10dB)
- Sensitivity: 103 dB - Speakon input and output
- Dimension: 472 x 345 x 270 mm
|
Archon - A new generation of improved speakers for modern indoor spaces
The Archon series of full-range and bi-amped speaker systems have been designed to provide ample bandwidth and high SPL for an accurate sound reproduction in the most various application projects.
With the Archon series FBT wants to meet today’s expectations of the installed sound market: a new generation of improved speakers responding to high quality sound requirements for modern indoor spaces.
The FBT Archon series lines up three 2-way full range/bi-amp models and three 2-way full range compact models; in addition, two low-profile subwoofers (2x8” and 2x15”) increase the low frequency extension of the desired systems. All Archon speakers are elegantly designed and crafted to meet the most demanding architectural design.
The FBT Archon series has been engineered to fulfill the need of high quality sound in bars, pubs, restaurants, retail shops, clubs, entertainment venues, fitness centers, conference rooms, theatres, educational institutions, houses of worship, museums, exhibition centers, cruise ships, corporate A/V, granting excellent speech intelligibility, wide and precise band coverage, ease of installation thanks to the flexible mounting hardware.
- 1 x 10” (2.5” VC) B&C custom made high excursion LF woofer
- 1 x 1” (1.7” VC) B& C custom made HF compression driver
- 1 x 1” FBT rotatable 80° x 50° constant directivity horn
- 2-way, passive sound reinforcement systems
- 15mm (0.6”) baltic birch plywood cabinets
- B&C custom designed high excursion LF woofers
- B&C custom designed HF compression drivers
- Full range / bi-amp crossover networks with protection
- 2 x Neutrik NL-4 speakon connectors
- 1 x 4 Euroblock terminal speaker connector
- 12 x M10 threaded rigging points
- 2 x metal flange threads for U bracket wall mount
- Acoustically transparent steel grille and antidust protection cloth
- Rear pocket handle to ease lifting and installation of the cabinet
- 35mm (1. 3/8”) top hat for speaker stand
- New FBT rotatable logo badge following vertical or horizontal installation
- Optional mounting hardware
- Optional line transformer 200W
Code: |
36329 |
Configuration: |
2 way |
Recommended amplifier: |
700 W RMS |
Long Term power: |
350 W |
Short term power: |
1400 W |
Transformer: |
100/200 optional V |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2.5 coil inch |
AES power: |
300 W |
High frequency driver: |
1 - 1.7 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
125/129 dB |
Dispersion: |
80°x50° HxV |
Crossover Frequency: |
1.8 passive or active Bi-Amp KHz |
Recommended HP filter: |
45hz - 24dboct |
Recommended external filter: |
Digital Management with presents |
Input connector: |
2 x Speakon NL 4 in & thru 4 x Euroblock |
Net Dimension (WxHxD): |
320x550x325 - 12.59x21.65x12.79 mm/inch |
Net Weight: |
15/33 kg/lb |
Transport Dimension (WxHxD): |
420x650x420 - 16.53x25.59x16.53 mm/inch |
Transport Weight: |
17 / 37.4 kg/lb |
|
Reviews
There are no reviews yet.