Content |
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 10" high-output LF transducer with 2" voice coil | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | 90° x 40° constant directivity horn | Built in passive crossover and selectable line transformer | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | LICC (Low Impedance Compensated Crossover) network |
12 brass suspension points (M8)
Acoustical Specifications |
---|
Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 118 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 11 | | System Sensitivity: | 95 dB | | Nominal Impedance: | 16 Ω | | Power Handling: | 200 Watt | | Peak Power Handling: | 800 Watt | | Recommended Amplifier: | 400 | | Protections: | Dinamyc | | Crossover frequencies: | 2000 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.5" HF driver, 1" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 106 dB | | Woofer: | 10" woofer, 2.5" voice coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 180 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 5m, 4-adriges Neopren Kabel | | Constant voltage transformer: | 70/100 | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 350 / 13.78 mm/inch | | Width: | 350 / 13.78 mm/inch | | Depth: | 320 / 12.60 mm/inch | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
| This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
|
2-Way, 10“
High Power System |
Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability. |
Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications. |
Specifications and Characteristics |
Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
Nominal Impedance |
8 Ohm |
Power Rating |
|
(RMS)2 |
300W |
Program2 |
600W |
Peak2 |
1200W |
Horizontal Coverage |
(-6dB) 90? |
Vertical Coverage |
(-6dB) 40? |
Sensitivity (dB/1w@1m) |
97dB SPL |
SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
Connectors |
2 Neutrik NL-4 Connectors on steel plate |
Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor |
Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel |
Recommended Sub-woofer |
Space PMS-15 |
Enclosure and Installation |
Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish. |
Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
Handle |
On top of the cabinet. |
Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
Net Weight |
18Kg (39.6 pounds) |
Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
Notes |
|
1 Specifications in half space
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data |
|
Archon - A new generation of improved speakers for modern indoor spaces
The Archon series of full-range and bi-amped speaker systems have been designed to provide ample bandwidth and high SPL for an accurate sound reproduction in the most various application projects.
With the Archon series FBT wants to meet today’s expectations of the installed sound market: a new generation of improved speakers responding to high quality sound requirements for modern indoor spaces.
The FBT Archon series lines up three 2-way full range/bi-amp models and three 2-way full range compact models; in addition, two low-profile subwoofers (2x8” and 2x15”) increase the low frequency extension of the desired systems. All Archon speakers are elegantly designed and crafted to meet the most demanding architectural design.
The FBT Archon series has been engineered to fulfill the need of high quality sound in bars, pubs, restaurants, retail shops, clubs, entertainment venues, fitness centers, conference rooms, theatres, educational institutions, houses of worship, museums, exhibition centers, cruise ships, corporate A/V, granting excellent speech intelligibility, wide and precise band coverage, ease of installation thanks to the flexible mounting hardware.
- 1 x 10” (2.5” VC) B&C custom made high excursion LF woofer
- 1 x 1” (1.7” VC) B& C custom made HF compression driver
- 1 x 1” FBT rotatable 80° x 50° constant directivity horn
- 2-way, passive sound reinforcement systems
- 15mm (0.6”) baltic birch plywood cabinets
- B&C custom designed high excursion LF woofers
- B&C custom designed HF compression drivers
- Full range / bi-amp crossover networks with protection
- 2 x Neutrik NL-4 speakon connectors
- 1 x 4 Euroblock terminal speaker connector
- 12 x M10 threaded rigging points
- 2 x metal flange threads for U bracket wall mount
- Acoustically transparent steel grille and antidust protection cloth
- Rear pocket handle to ease lifting and installation of the cabinet
- 35mm (1. 3/8”) top hat for speaker stand
- New FBT rotatable logo badge following vertical or horizontal installation
- Optional mounting hardware
- Optional line transformer 200W
Code: |
36329 |
Configuration: |
2 way |
Recommended amplifier: |
700 W RMS |
Long Term power: |
350 W |
Short term power: |
1400 W |
Transformer: |
100/200 optional V |
Nominal impedance: |
8 ohm |
Frequency response: |
60Hz - 18KHz -6dB |
Low Frequency woofer: |
10 - 2.5 coil inch |
AES power: |
300 W |
High frequency driver: |
1 - 1.7 coil inch |
Sensitivity (@1W/1m): |
97 dB |
Maximum SPL cont/peak: |
125/129 dB |
Dispersion: |
80°x50° HxV |
Crossover Frequency: |
1.8 passive or active Bi-Amp KHz |
Recommended HP filter: |
45hz - 24dboct |
Recommended external filter: |
Digital Management with presents |
Input connector: |
2 x Speakon NL 4 in & thru 4 x Euroblock |
Net Dimension (WxHxD): |
320x550x325 - 12.59x21.65x12.79 mm/inch |
Net Weight: |
15/33 kg/lb |
Transport Dimension (WxHxD): |
420x650x420 - 16.53x25.59x16.53 mm/inch |
Transport Weight: |
17 / 37.4 kg/lb |
|
- Equipped with: 2" tweeter and 10" woofer
- Equipped with Yamaha\'s "Wide Dispersion CD Waveguide Horn“
- Rated power: 700 W (PGM)
- Biamp mode
- Setting for floor monitor
- Lightweight but durable wooden cabinet with high quality polyurea coating
- Stand flange mount for two angles
- Rotatable horn and various U-bracket options (UB-DZR10H/V) for flexible setup and placement
- Dimensions (W x H x D): 315 x 537 (with rubber feet) x 345 mm
- Weight: 14.0 kg
| MASTER AUDIO SB250 Passive Loudspeaker 2 Way 10" 200Wrms 8 Ohm
- 2-way passive speaker box
- Impedance(Ohm) 8
- Power output 200 W RMS
- ABS box - Woofer 10“, paper cone
- Compression driver,1" titanium diaphragm
- Frequency reponse: 50 - 17KHz (-10dB)
- Sensitivity: 103 dB - Speakon input and output
- Dimension: 472 x 345 x 270 mm
|
Reviews
There are no reviews yet.