| Content | Each one of our moving magnet cartridges are meticulously hand assembled to the highest standard by our highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible.
Each one uses a pair of parallel wound coils which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.
The multi award winning, Rega moving magnet range offers unrivalled clarity, engaging stereo imaging and a natural dynamic performance, putting you in touch with your vinyl collection like never before.
Hand built moving magnet cartridge with three point mounting system and Vital profile diamond stylus with zero tolerance channel balance.
- Output: 6.8 - 7.2mV
- Stylus: Vital. Complex fine line micro-ground from a rectangular diamond billet.
- Fixing: Rega three point fixing
- Coils: High Spec parallel wound coils
- Colour: Yellow
- Tracking Pressure 1.75g
|
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
|
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
22 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-20.000 Hz
| |
Frequency response
|
20-18.000 Hz -3dB/-2 dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
| |
Compliance, dynamic lateral
|
12 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
--
| |
Tracking force range
|
2,0-4,0 g (20-40 mN)
| |
Tracking force recommended
|
3,0 g (30 mN)
| |
Tracking angle
|
-
| |
Internal impedance, DC resistance
|
-
| |
Internal inductance
|
-
| |
Recommended load resistance
|
-
| |
Recommended load capacitance
| - | |
Cartridge weight
| 18,5 g
| |
Replacement stylus unit
| Digitrak |
|
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
|
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
25 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-20.000 Hz
| |
Frequency response
|
20-15.000 Hz 3dB/-2dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
| |
Compliance, dynamic lateral
|
6 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
R 18 μm
| |
Tracking force range
|
3,0-5,0 g (30-50 mN)
| |
Tracking force recommended
|
4,0 g (40 mN)
| |
Tracking angle
|
20°
| |
Internal impedance, DC resistance
|
750 Ohm
| |
Internal inductance
|
450 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-600 pF
| |
Cartridge weight
|
18,5 g
| |
Replacement stylus unit
| Scratch |
|
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
|
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
22 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-20.000 Hz
| |
Frequency response
|
20-20.000 Hz +/- 1,5 dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
| |
Compliance, dynamic lateral
|
12 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
-
| |
Tracking force range
|
2,0-4,0 g (20-40 mN)
| |
Tracking force recommended
|
3,0 g (30 mN)
| |
Tracking angle
| -
| |
Internal impedance, DC resistance
|
-
| |
Internal inductance
|
-
| |
Recommended load resistance
|
-
| |
Recommended load capacitance
|
-
| |
Cartridge weight
|
5 g
| |
Replacement stylus unit
| Digitrak |
|
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
|
Output voltage at 1000Hz, 5cm/sec.
|
11 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
22 dB
| |
Channel separation at 15 kHz
| -
| |
Frequency range at -3dB
|
20-18.000 Hz
| |
Frequency response
|
20-18.000 Hz - 3 dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
| |
Compliance, dynamic lateral
|
12 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
R 18 μm
| |
Tracking force range
|
3,0 g (30 mN)
| |
Tracking force recommended
|
4,0 g (40 mN)
| |
Tracking angle
|
20°
| |
Internal impedance, DC resistance
|
1.680 Ohm
| |
Internal inductance
|
920 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-400 pF
| |
Cartridge weight
|
5 g
| |
Replacement stylus unit
| Q.Bert |
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
Reviews
There are no reviews yet.