| Content |
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.
A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.
The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.
Specifications
Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.
Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV
Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω
Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB
Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV
Load settings for adjustable MC stages
Impedance -100ohm
Capacitance - 1000pF
Gain setting - High (\'On\' position for Rega phono stages)
Fono MC dip switches settings (factory set at Rega for Rega MC models). |
WITH INTEGRATED ANALOGUE-TO-DIGITAL CONVERTER
Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.
ADC SOFTWARE
Thorens turntables can be considered state-of-the-art in hi-fi technology as they would extract even the most minute details from your precious vinyl records. The signals generated by the pickup cartridges are however very small and therefore must be amplified to a much higher level. Regrettably, most of today’s amplifiers are no longer equipped with a dedicated phono stage. This unfortunate situation was a good reason for Thorens to develop the TEP 302, a complete phono preamplifier including RIAA equalization, which was to complement the outstanding playback performance of our turntables.
The TEP 302 is a pure-bred Class-A amplifier which employs selected, very special low-noise operational amplifiers throughout. The circuitry has been optimized "by ear” after several extended listening sessions. Of course, the TEP 302 also features a 15-Hz subsonic filter in order to protect the woofers from dangerous excursions when a warped record is played. More details, more dynamics.
- Mode: MM/MC (switchable)
- Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
- Input impedance (MM): 47 kΩ + 220 pF fixed
- Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
- Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
- Frequency response (-3 dB): 10 Hz - 50 kHz
- RIAA curve accuracy: ±0.3 dB
- THD+N: 72 dB (MC)
- Crosstalk: ≧40 dB
- Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
- Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ω
- Input connections: 3 pairs of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC
- Power consumption: 3.5 W/15 mA
- Weight: 511 g (not including power supply)
- Dimensions (W x H x D): 150 x 50 x 117 mm
- A/D converter: Tenor TE7022L 24Bit Delta Sigma
- Sampling rates: 8,16, 32, 44.1, 48, 96 kHz
- USB output: USB 2.0, fully backward-compatible with USB 1.1
- Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®
|
- Input impedance 47kohms/100pF
- Gain 32dB
- Output voltage typically 200mV/1kHz at 5mV/1kHz
- Noise floor 82dB (88dB - A weighted)
- THD
| Perfectly Balanced
Together with the GT-5000 turntable and M-5000 power amplifier, Yamaha delivers an end-to-end balanced signal chain across its flagship models for premier performance.
Floating and Balanced Pre-amplifier
The C-5000 features fully balanced and discrete circuit transmission across all stages of the signal path at Tone Defeat.
Symmetrical, Folding-book Circuit Design
The folding-book design for the pre-amplifier PCB mirrors the left and right signal paths for precise matching and layout.
With each channel physically identical, the C-5000 is capable of the most accurate reproduction of audio which is both wide and deep.
Further, the ground loop is minimised when other components are connected
The patented floating design is adopted across the phono EQ, input amp and line amp stages - removing the influence of ground noise from the signal.
Dual Toroidal Transformers
Adopting independent dual toroidal transformers for the left and right channels delivers optimal separation and therefore producing a sound stage which is faithful to the original source.
Low magnetic leakage lowers adverse impact on the audio signal. Following detailed research based on trial listening, the power transformer was enclosed in a copper-plated case to suppress magnetic flux and vibration. This also assists in minimising the influence of flux in the phono circuit.
This realises a gentle, calm and even spacious sound due to enhanced reproduction of detailed signals.
By copper-plating the chassis to minimise the influence of voltage on the circuit, the C-5000 is capable of expressing the subtlest nuances as well as powerful bass.
Additionally, thick screw-type wires are utilised to reduce the impedance of the power supply and maximises the transmission of musical information.
Original Design
The C-5000 was designed from the ground up to deliver the ultimate in listening experiences - down to its aesthetic and even its touch.
The knobs and lever switches feature original designs to communicate both innovation and craftsmanship.
The volume knob is both rigid and precise - employing ball-bearings and precision-cut aluminium to achieve its touch while the lever switches have also been refined for enhanced operation.
Custom-designed Feet
Every aspect of the C-5000 was carefully considered when designing this flagship model. Its construction exudes master craftsmanship and reflects an obsession with achieving the highest levels of performance.
The feet are no exception. Like the M-5000, the custom heavy-duty brass feet function either as fully supported spikes or with a scratch guard base for use on delicate surfaces.
Specifications:
- Input Terminal: RCA:6 (PHONO, TUNER, CD, LINE 1, LINE 2 IN, EXT IN), BAL:4 (PHONO, BAL 1, BAL 2, EXT IN), TRIGGER IN: 1 (Slave mode), REMOTE IN:1
- Output Terminal: RCA:3 (LINE 2 OUT, LINE 1, LINE 2), BAL:1 (BAL), TRIGGER OUT: 2 (Master mode), REMOTE OUT:1
- Rated Output Voltage: [Input 200 mV, 20 Hz-20 kHz, 0.01% THD] (BAL BYPASS) 2 Vrms / 150 ohm, (BAL ATT) 1 Vrms / 150 ohm, (LINE 1 / LINE 2) 1 Vrms / 150 ohm), (LINE 2 RECOUT) 200 mVrms / 1.2 kohm
- Maximum Output Voltage: [1 kHz, 0.05% THD] (BAL) 6 Vrms, (LINE 1 / LINE 2) 3 Vrms, (LINE 2 RECOUT) 3Vrms
- Input Sensitivity / Input Impedance: [BAL / LINEOUT: 1 V] (BAL) 200 mVrms / 52 kohm, (LINE,etc) 200 mVrms / 47 kohm, [LINE 2 RECOUT, 150mV (1 kHz) ] (PHONO MC 300 ohms) 100 uVrms / 300 ohms, (PHONO MC 100 ohm) 100 uVrms / 100 ohms, (PHONO MC 30 ohm) 100 uVrms / 30 ohm, (PHONO MC 10 ohm) 100 uVrms / 10 ohm, (PHONO MM BAL(UNBAL)) 2.5 mVrms / 52 k(47 kohm), (EXT IN) 1 Vrms / 20 kohm
- Maximum Input Signal Voltage: [LINE2 REC (1kHz, 0.05% THD)] (BAL) 2.8 Vrms, (BAL ATT) 5.6 Vrms, (LINE,etc) 2.8 Vrms,(PHONO MC) 2 mVrms, (PHONO MM) 50 mVrms, [BAL/LINEOUT (1kHz 0.05% THD)](EXT IN) 5.6 Vrms
- Frequency Response: [JEITA, Load 22 kohm] (BAL/LINE, etc) +0 / -3 dB (10 Hz-100 kHz), +0 / -0.3 dB (20 Hz-20 kHz)
- Total Harmonic Distortion Plus Noise: [JEITA, Input: 0.5 V] 0.0100% (BAL [LINE, etc.] to BAL [LINE], 20 Hz-20 kHz), 0.0200% (MM / MC BAL [UNBAL] to LINE 2 RECOUT, 20 Hz-20 kHz)
- Channnel Separation: [JEITA, Input 1.0 kohm terminated, 1 kHz / 10 kHz] 110 dB or higher (BAL / LINE, etc.), 80 dB or higher (MC, BAL / UNBAL), 98 dB or higher (MM, BAL / UNBAL)
- Function Separation: [IHF-A network, Input 1.0 kohm terminated, JEITA] 110 dB or higher (BAL / LINE, etc.), 75 dB or higher (MC, BAL / UNBAL), 95 dB or higher (MM, BAL / UNBAL)
- Signal-to-Noise Ratio: [IHF-A network, Input 1.0 kohm terminated, JEITA] 110 dB or higher (BAL / LINE, etc.), 80 dB or higher (MC, 300 ohms, BAL / UNBAL), 98 dB or higher (MM, BAL / UNBAL)
- Residual Noise: [IHF-A network] 3 uV (BAL / LINE OUT)
- Tone Control Characteristics: (BASS) Boost / Cut [30 Hz] ±9 dB, Turnover Frequency 350 Hz, (TREBLE) Boost / Cut [20 Hz] ±9 dB, Turnover Frequency 3.5 kHz
- Headphone Jack Rated Output Power: 35 mW + 35 mW (CD, etc. [1 kHz, 32 ohm, 0.2% THD])
- Deviations from RIAA Equalizer: ±0.5 dB (MC / MM BAL [UNBAL])
- Subsonic Filter: 15 Hz: -3 dB (MC / MM BAL [UNBAL])
- Power Consumption: 60 W
- Standby Power Consumption: 0.2 W
- Power Management (Auto Power Standby): Yes
- Dimension (W?H?D): 435 x 142 x 451 mm; 17-1/8” x 5-5/8” x 17-3/4”
- Weight: 19.1 kg; 42.11 lbs.
|
- 11.2-Channel Preamplifier Configuration
- Dolby Atmos & DTS:X Compatibility
- RCA & Balanced XLR Pre-Outs
- Bluetooth, Wi-Fi, AirPlay Connectivity
- 7 x HDMI Inputs / 3 x HDMI Outputs
- HDR10, Dolby Vision, HLG Pass-Through
- HDMI Upscaling
- Works with Amazon Alexa
- Integrated AM/FM Tuners
Enjoy streaming audio and immersive multi-channel sound with your amplifier and the Yamaha AVENTAGE CX-A5200 11.2-Channel MusicCast Preamplifier. It sports an 11.2-channel XLR pre-out and features Dolby Atmos and DTS:X compatibility for object-based audio decoding. Built-in Bluetooth and AirPlay support allows the preamplifier to wirelessly stream music from compatible sources, such as smartphones and tablets.
Onboard Wi-Fi and Ethernet connectivity allows the AVENTAGE CX-A5200 to access music from your connected computer or NAS. Amazon Alexa compatibility enables you to control certain functions of the preamplifier with just your voice through your Alexa-enabled devices. With seven HDMI inputs and three outputs, the CX-A5200 can act as a video switcher for your HD source components. It will pass through HDR UHD 4K signals as well as HDR10, Dolby Vision, and HLG HDR formats. The preamplifier also has a USB port for accessing media stored on USB flash drives.
Note: Access to certain Internet-based content may require a subscription to a service.
Surround:AIThis AI technology built into the DSP analyzes the scene of your content and creates a surround effect to help reproduce it with augmented realism. In real time, this AI analyzes scenes by focusing on distinct sound elements, such as dialogue, background music, ambient sounds, and sound effects, and automatically enhances the surround effect to help provide greater realism.Dolby Atmos & DTS:XThese object-based sound technologies are designed to create realistic surround sound, positioning and moving individual sounds to nearly any virtual point in your room, including overhead.CINEMA DSP HD3In addition to Dolby Atmos, DTS:X, and conventional channel-based audio, a 3D space can be simulated in which separate acoustic elements can move freely, providing a sensation of the motion of sound effects above your head. CINEMA DSP HD3 uses signal processing algorithms to help heighten this sense of realism.YPAO-RSC (Reflected Sound Control)YPAO-RSC analyzes the room acoustics with the included microphone to tune your system for optimal sound in your room. It uses RSC to correct early reflections for enhanced sound. YPAO 3D is designed to provide automatic sound parameter optimization that maximizes the 3D sound field of CINEMA DSP HD3 as well as Dolby Atmos and DTS:X, and with 64-bit EQ calculations, this technology helps produce natural room acoustics.Dual ESS SABRE PRO Premier (ES9026 PRO) DACsIncorporating two ESS SABRE PRO Premier (ES9026 PRO) DACs helps further enhance the signal-to-noise ratio and achieve up to 32-bit performance.Large Power Transformer with Vibration Dampening PlateThe CX-A5200 features a large power transformer to help maximize performance and precision. Deep, powerful sound is achieved with enhanced regulation of power, while a thick brass plate helps dampen unwanted vibrations.Thick Bottom PlateStabilizing the chassis is the key to enhanced performance and sound. The CX-A5200 achieves this by employing a thick bottom plate, which acts to steady and immobilize the entire structure and achieve optimal sound.Balanced Connections and XLR TerminalsElectrical noise is an inherent issue with cabling due to connection with other A/V components, the connections between them, and from other sources of external noise. To ensure that the CX-A5200 is not affected by such distortion, it uses balanced, noise-resistant terminals. Even the RCA unbalanced connections use a ground-sensing transmission method that achieves simple balanced transmission. Further, the XLR terminals allow for the use of long cables. The CX-A5200 also allows a balanced audio input connection from audiophile-grade source components such as CD players.Built-In Streaming ServicesWith built-in music streaming services and connectivity options, you can enjoy all your content, including Internet radio stations and music from your compatible smart devices with the CX-A5200.Voice Control with Amazon Alexa and MusicCastWith Alexa voice control integration, all you have to do is ask. Use any Alexa-enabled device to control either the amplifier by itself or multiple MusicCast devices throughout your home.Bluetooth and AirPlay CompatibilityThe CX-A5200 features Bluetooth connectivity for simple, convenient wireless msuic streaming from your compatible smart devices, including smartphones, tablets, and laptops. iTunes and iOS users can use AirPlay to wirelessly stream audio seamlessly from compatible devices.MusicCast for Whole-Home MusicMusicCast makes it easy to share audio throughout the home using your Wi-Fi network. The CX-A5200 is designed to work seamlessly with other MusicCast products, including multi-room streaming amplifiers, soundbars, wireless speakers, and hi-fi gear, and they\'re all controllable from the MusicCast app or from a third-party control system such as Control4, RTI, or ELAN.Additional Features
- 34 Cinema DSP programs
- Dialogue level adjustment
- Virtual presence speaker & virtual surround back speaker
- Dialogue lift (no presence speakers required)
- Virtual CINEMA FRONT
- Pure Direct (with video on mode)
- Compressed music enhancer
- High-resolution music enhancer
- YPAO Volume
- Adaptive DRC (Dynamic Range Control)
- Initial volume and maximum volume setting
- A.R.T. Wedge
- 0 to 500 ms audio delay
- Analog to HDMI & HDMI to HDMI upscaling
- Video adjustment
- Deep Color, x.v.Color, 24 Hz refresh rate, and auto lip-sync support
- HDR10, Dolby Vision, HLG, and BT.2020 support
- HDMI CEC (SCENE, device control)
- Graphical user interface
- Eight SCENE PLUS sets
- App control (iOS/Android)
- Web browser control
- Full LED-backlit remote control
- Zone GUI
- Party Mode
- Auto Power Standby
- ECO Mode
| Audio |
|---|
| Audio Formats |
Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS:X, DTS-HD Master Audio |
| D/A Converter |
2 x ESS 384 kHz / 32-bit SABRE PRO Premier DAC ES9026PRO for all channels |
| Video |
|---|
| HDR Support |
HDR10, Dolby Vision, HLG pass-through |
| HDCP Version |
2.2 |
| Upscaling |
Up to 4K/60p, 4:4:4, analog to HDMI, HDMI to HDMI |
| Physical Specifications |
|---|
| Power Requirements |
120 VAC, 60 Hz |
| Standby Power Consumption |
≤0.1 W |
| Dimensions (W x H x D) |
With Antenna Down: 17.13 x 7.5 x 18.63 / 43.5 x 19.05 x 47.31 cm
With Antenna Up: 17.13 x 10.63 x 18.63 / 43.5 x 26.99 x 47.31 cm |
| Weight |
33.5 lb / 15.2 kg |
| Bluetooth |
Version: 4.2
Supported Profiles: A2DP, AVRCP
Supported Codecs: SBC, AAC
Class: Class 2
Range: 33\' / 10 m |
| AirPlay |
Yes |
| Wi-Fi |
Yes, dual-band (2.4/5 GHz) |
| Supported File Types |
MP3, WMA, WAV, MPEG-4 AAC up to 48 kHz / 16-bit, ALAC up to 96 kHz / 24-bit, FLAC up to 384 kHz / 24-bit, AIFF up to 384 kHz / 32-bit, up to 11.2 MHz |
| Inputs |
7 x HDMI
2 x RCA component video
4 x RCA composite video
3 x optical TOSLINK
3 x digital coaxial
1 x 2-channel XLR
8 x stereo RCA (1 front)
1 x stereo RCA phono with ground screw
1 x 5.1-channel RCA
1 x USB (front) |
| Outputs |
3 x HDMI
1 x 11.2-channel XLR pre-out
1 x 11.2-channel RCA pre-out
2 x stereo RCA pre-outs (Zone 2/3)
1 x 1/4" / 6.35 mm headphone (front) |
| Other Ports |
1 x RJ45 Ethernet LAN
2 x 1/8" / 3.5 mm trigger out
1 x 1/8" / 3.5 mm remote in
1 x 1/8" / 3.5 mm remote out
1 x RS-232C
2 x wireless antennas
1 x FM antenna in
1 x AM antenna in
1 x 1/8" / 3.5 mm YPAO mic in (front) |
| The Behringer PP400 is a handy phono preamplifier for turntables. The unit is a compact problem solver for today's home theater systems which do not provide an input for a turntable. The PP400 features an RCA input and output, a balanced 1/4" TRS phone output is also provided. The balanced output enables a turntable to be connected to professional mixers, recorders, amplifiers, etc.
RCA and 1/4" TRS Balanced Outputs The PP400 provides a consumer RCA output suitable for stereo receivers and other consumer electronic devices. A balanced 1/4" output is ideal for connecting to audio mixers, professional recording devices, etc. Miniature Design The compact design ensures the PP400 will perform as a handy utility device while remaining out of site.
Love Live Vinyl
Vinyl. There's something about it. Maybe it's a sense of nostalgia. Maybe it's the gorgeous audio. Or maybe it's that comforting crackle as the needle hits the groove. Whatever it is, vinyl is making a big comeback. But if you want to integrate your player into your home sound system, you're going to need some help from the Behringer PP400.
Behringer's compact phono preamp maintains the signal integrity of your turntable, giving it the boost it needs before reaching your mixer. By converting your phono signal to a line-level signal, the PP400 ensures a characteristic sound with improved audio-quality and nothing lost from your records.
This state-of-the-art device is perfect for any player, built to accommodate all magnetic pickups. And with dedicated RCA and 1/4" TRS output connectors onboard, it'll work in harmony with your current system.
Features
- Lets you connect your turntable to your sound system by converting your phono signal to a line level signal
- Universal application - state-of-the-art phono preamp to accommodate all magnetic pickups
- Variety of applications via dedicated RCA and 1/4" TRS output connectors
- DC 12 V adapter included
- High-quality components and exceptionally rugged construction ensure long life
- Designed and engineered in Germany
Specifications
- Input Connector: RCA
- Input Impedance: Approx. 47 kOhms
- Maximum Input Level: -23.5dBv @ 1kHz
- Output Connector:
- Output Impedance: Approx. 50 Ohms
- Maximum Output Level: +11.5 dBV @ 1kHz
- THD: 0.06 Typical @ -40dBu/1kHz
- Gain: 35dB
- Signal-to-Noise Ratio: 68dBu @ 0dBu, A-Weighted
- Input Sensitivity: 5.3mW @ 1kHz
- Power: 12V External Power Supply (Included)
- Dimensions: 32mm x 103mm x 64mm / 1.25'' x 4'' x 2.5'' (H x D x W)
- Weight: 0.180kg / 0.40lbs
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.