Content | This wired remote has been designed for direct access to the most frequently used actions and commands of TotalMix FX, being an indispensable tool in the studio's daily applications. Its extremely flexible configuration through TotalMix FX will simplify workflow and greatly increase the usability of the RME interface in most real world situations. The ARC USB is a USB 1.1 (UAC1) MIDI remote control, natively compatible to Windows and Mac OS X. As soon as it is present in the operating system TotaIMix FX will detect it and communicate with it, without disturbing other remote controls. Therefore it is also not necessary to switch the ARC USB on or off within TotalMix FX - it will just work. And because it communicates with TotalMix FX (via USB) it is compatible to all RME audio interfaces that are detected and supported by TotalMix FX. This goes back to RME interfaces released 2001!
As soon as the ARC USB is connected to a computer any button press or wheel turning will cause the respective action performed by TotalMix FX - and therefore also by the RME audio interface. With the UFX+ and UFX II the ARC USB can also be connected directly to these devices, currently the only RME interfaces having an internal USB 1.1 host with matching connector. This way of connecting is handy in stand-alone mode, where the ARC USB is also supported by the UFX+ and UFX II.The ARC USB is bus powered, but draws only little current. Also it uses USB 1.1 as bus standard, which these days is uncritical due to its lower frequency and speed demands. USB 2 cables with 5 meter to 10 meter length, and cheap USB 2 cable extensions that usually make a bus-powered interface fail will work perfectly for the ARC USB. Still at higher lengths RME recommends to use active USB 2 cables (also called extension or repeater cables), which are not expensive and work over lengths of more than 20 meters.
The ARC USB can control several interfaces simultaneously, which happens automatically as the Key Commands dialog in TotalMix FX is specific to the currently selected audio interface. Just assign only the functions that are desired for each respective interface. After that the ARC USB keys and the encoder wheel remote the respective interface where they have been assigned to, without the need to further switch or select anything in normal operation.
Remote Control
Easy operation of TotalMix FX software
Compatible with RME Fireface UFX + and UFX II (direct) and all RME devices with TotalMix FX (via computer)
Controls the DSP-based routing and effects section
USB or remote interface (stand-alone operation)
15 programmable illuminated function buttons
Programmable connection for foot switch
Jog wheel for parameter change
Compatible with RME UFX +
Parallel operation of several interfaces possible
Mac OS and Windows compatible
ARC USB AND UFX+ / UFX II IN STAND-ALONE MODE
In stand-alone mode of Fireface UFX+ / UFX II a fixed set of functions is activated on the keys:
Row 1: Setup 1-4
Row 2: Setup 5-6 x x
Row 3: Mono, Volume Phones 1, Volume Phones 2, DIM
Lower keys: DURec: Rec, Play/Pause, Stop
x = no function
The included stickers also offer the stand-alone layout.
In the UFX+ / UFX II display’s menu the way of operating the ARC USB can be configured for stand-alone mode. Those options are found under SETUP/REV, Options, Hardware/Diagnosis:
STANDALONE ARC VOLUME
Deactivates all keys. Only the encoder wheel works, with a fixed assignment to Main Volume.
This option is also a safety function in case the ARC USB is connected to the UFX+ / UFX II, but oper-ated online (with computer). When the system goes offline (computer removed, sleep state…) the functions on the keys change, because online mode changed to stand-alone mode. Operating the keys then could activate unintended functionality or changes.
STANDALONE ARC 1 S OP
Each key has to be pressed for one second to activate the programmed functionality. This safety function prevents unintentional changes. It can be stored within the Setups, activating this mode automatically when such a Setup is loaded. When loading a Setup where this function had not been active this mode is automatically deactivated at the UFX+ / UFX II. |
The UA-1G is a compact 1 x 1 USB Audio Interface that offers excellent-quality sound via multiple connection options and a simple, user-friendly design.
- Stereo input and output at 24-bit/96kHz audio quality
- High-end A/D and D/A converters for accurate recording and playback
- Large Input Level knob for easy control while recording
- 1/4" jack with Hi-Z option for recording electric guitar or bass
- Electret condenser mic input
- RCA phono type and optical-digital audio I/O
- Headphone output
- USB powered – no AC adapter required
- SONAR LE for music recording, editing, and publishing on PC
- Low-latency ASIO 2.0 (PC); WDM (Windows Vista, Windows XP) and Core Audio (Mac OS X) support
Number of Audio Record/Playback Channels | Record: 1 pair of stereo
Play: 1 pair of stereo
REC SOURCE switch = ANALOG: Full duplex (except for 96 kHz setting)
REC SOURCE switch = DIGITAL: Recording only |
---|
Signal Processing | PC interface: 24 bits
AD/DA Conversion: 24 bits (linear)
* ADVANCE DRIVER switch = OFF: 16 bits |
---|
Sampling Frequency | Digital output: 32/44.1/48/96 kHz
Digital input: 32/44.1/48/96 kHz
AD/DA Conversion: 32/44.1/48/96 kHz
* ADVANCE DRIVER switch = OFF: 32/44.1/48 kHz
|
---|
Nominal Input Level | Line input jacks: -10 to +4 dBu
Guiter input jakcs: -30 to -16dBu
Mic input jack: -40 to -26 dBu
|
---|
Nominal Output Level | Line output jacks: -10 dBu |
---|
Interface | USB Digital input (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector.
Digital output (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
* conforms to IEC60958 consumer format. |
---|
Controllers | ADVANCED DRIVER Switch
Guiter/Mic Switch
INPUT VOLUME knob
PHONES VOLUME Dial
SAMPLE RATE Switch
96kHz MODE Switch
INPUT MONITOR Switch
REC SOURCE Switch |
---|
Connectors | USB Connector (B type)
Line Input jacks (L, R) (RCA phono type)
Line Output jacks (L, R) (RCA phono type)
Guiter/Mic Input jack: (1/4 inch phone type)
Mic Input jack (Plug-in powered miniature phone type)
Digital Intput connector (Optical mini type)
* The same jack serves as both the headphones jack and digital output connector.
Headphones jack (Stereo miniature phone type)
Digital Output connector (Optical mini type)
* The same jack serves as both the Mic Input jack and digital input connector. |
---|
Power Supply | Supplied from the computer |
---|
Current Draw | 200 mA |
---|
Accessories | Ownerʼs Manual, UA-1G CD-ROM, SONAR LE CD-ROM | Size and Weight |
---|
Width | |
---|
Depth | |
---|
Height | |
---|
Weight | |
---|
|
2-Channel USB2.0 Audio Interface with USB-C Connection
- 24 Bit / 192 kHz
- XLR/TRS combo input for microphones, line signals and instruments
- +48 V phantom power switchable
- VU meter
- Monitor level control
- Headphone level control
- Switchable direct monitoring with mix control
- 2 Line outputs: 6.3 mm jack, balanced
- Stereo headphone output: 6.3 mm jack
- Integrated USB-A hub (USB-MIDI, max. 250 mA)
- MIDI in / out
- USB bus-powered
- Colour: White
- Includes USB cable (type C to A) as well as Ableton Live Lite, NI Guitar Rig LE, Arturia Analog Lab Intro, Pre 1973, Plate 140, Tape 201, JUN 6
-
Recording / Playback Channels 2x2
Number of Instrument Inputs 2
Number of S/PDIF Connectors 0
Number of ADAT Connectors 0
Numer of AES/EBU Connectors 0
Number of MADI Connectors 0
Max. sample rate (kHz) 192 kHz
Max. resolution in bit 24 bit
|
The Yamaha GO44 is a mobile audio solution that features high quality line
inputs/outputs and worldclass MIDI and audio recording software enabling
professional quality recording to a computer in a very compact package that
can be carried and used virtually anyway.
The Yamaha GO44 boasts up to 24-bit/192kHz resolution on the analog inputs/
outputs - the best in its class - and 24-bit/96kHz on the digital I/O. This pro-level
quality makes the Yamaha GO44 perfect for any type of recording, and allows
you to capture the full details and nuances of the original source - from the
breathiness of a vocal to the delicate finger slides of an acoustic guitar performance.
The Yamaha GO44 features 4-in/4-out multi-channel audio, with two analog phone
jack terminals for both input and output, and special S/P DIF coaxial terminals for
two-channel digital in/out. This device is simple and easy to use, yet provides high-quality
recording capability - perfect not only for those who want to create music, but also
for those who want an audio playback system for their computer that delivers
outstanding sound quality.
The digital outputs on the Yamaha GO44 are compatible with the AC-3 and DTS
surround sound formats. Simply connect a surround compatible amplifier/speaker
setup, and enjoy the powerful sonic experience of surround sound.
Yamaha GO44 Features:
FireWire audio interface
Durable aluminum die cast body
Simple, small and light weight
2 x Balanced Line inputs / outputs
Headphones output on Front Panel
1 MIDI In /1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
|
Yamaha AUDIOGRAM3 Computer Recording System Specifications:
- Mic/Hi-Z input: 1
- Audio Format: USB AUDIO 1.1, 16bit/44.1kHz
- Combo Connectors: 1
- Stereo In connectors: Phone connector x 2 (L/MONO x 2, R x 2)
- USB Connector: To Host x 1
- Headphone connector: Stereo Phone connector x 1
- Stereo Out connector: Phone connector x 2 (L, R)
- Power Supply: USB powered
- Dimensions (W x H x D): 180 mm x 61 mm x 112 mm (7-1/8" x 2-3/8" x 4-3/8“)
- Accessories: CUBASE AI DVD, Owner's Manual, USB Cable
System Requirements - Windows Vista
- Windows-based computer with built-in USB interface
- OS: Windows Vista
- CPU: 1GHz or better Intel Core / Pentium / Celeron processor
- Memory: More than 1GB
Windows XP - Windows-based computer with built-in USB interface
- OS: Windows XP Professional / XP Home Edition
- CPU: 750MHz or better Intel Core / Pentium / Celeron processor
- Memory: More than 128MB
Macintosh - Macintosh computer with built-in USB interface
- OS: Mac OS X 10.3.3 or higher
- CPU: Intel CPU / Macintosh G3 processor 300 MHz or better
- Memory: More than 128MB
Cubase AI4 System Requirements:
- Windows
- OS: Windows XP Professional SP1 / XP Home Edition SP1 / Windows Vista (32-bit)
- CPU: Intel Pentium 1.4GHz or better
- Available Memory: More than 512MB
- Hard Disk: Free disk space of 1GB or more
- Audio Interface: Windows DirectX / ASIO compatible
Macintosh - OS: Mac OS X 10.4 or higher
- CPU: Power Mac G4 1GHz or Core Solo 1.5GHz or better
- Available Memory: More than 512MB
- Hard Disk: Free disk space of 1GB or more
|
Computer Based Recording Packages
Computer-Based Recording Packages For All Players Of Musical Instruments
The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.
Size/Weight
Dimensions | Width | 170mm (6-3/4“) | Height | 59mm (2-3/8“) | Depth | 192mm (7-5/8“) | Weight | Weight | 770g (1.7 lbs.) |
General Specifications
Sampling Frequency Rate | USB AUDIO 1.1, 16bit/44.1kHz |
Effects
Types | Dynamic | 1-knob Compressor (COMP) x 2 |
Storage and Connectivity
Connectivity | Headphones | Stereo Phone connector x 1 | Microphone | Mic/Hi-Z input x 2 | LINE IN | Phone connector x 4 (L/MONO x 2, R x 2) | LINE OUT | Phone connector x 2 (L, R) | USB TO HOST | USB (TO HOST) |
Power Supply
System Requirements
Windows | PC | Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface | CPU | 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor | Support OS | Windows Vista / Windows XP Professional / XP Home Edition | Memory | More than 1 GB More than 128 MB | Macintosh | PC | Macintosh computer with built-in USB interface | CPU | Intel CPU / Macintosh G3 processor 300 MHz or better | Support OS | Mac OS X 10.3.3 or higher | Memory | More than 128 MB |
Accessories Included Accessories | Cable | USB Cable | Others | CUBASE AI DVD, Owners Manual |
|
Reviews
There are no reviews yet.