| Content | he RØDE NTG3 super cardioid shotgun microphone is designed for professional use on film, television, ENG and wherever high resolution broadcast audio is required.
As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.
Machined from solid brass and nickel plated with an anti-glare finish, the NTG3 is incredibly robust while remaining incredibly lightweight.
Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.
An incredibly durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials.
The RØDE NTG3 precision shotgun microphone is covered by RØDE Microphones' industry leading 10 year warranty.
Acoustic Principle Line Gradient
Active Electronics RF Bias
Capsule 0.50“
Polar Pattern Hyper Cardiod
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 25Ω
Maximum SPL 130dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 8.2dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options
(44~52V min 5mA)
Weight 163.00gm
Dimensions 255.00mmH x 19.00mmW x 19.00mmD
Output XLR | The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-
condenser microphone design.Intended for recording acoustic instruments,
drum overheads, cymbals and live performances, the compact externally
polarized mic employs a .5? capsule, an active J-FET impedance converter
with bipolar output buffer.
Finished in durable satin nickel, the NT5 is intended for either single or stereo
X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case
with windshields and mounts.
SPECIFICATIONS:
Acoustic principle: Externally polarised single diaphragm
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651: 78dB
Equvalent noise: Maximum spl: 143 dB @ 1% THD into 1k_
Sensitivity:
-38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL
Power supply voltage: P48 Supply (38V?52V), P24 Supply (20V-26V)
Current consumption: 4 mA, 2 mA,
Weight: 100g | This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip.
For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone.
The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments.
The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original.
Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout.
Three-year warranty.
Specification
Polar pattern: cardioid
Frequency range: 20?20,000 Hz
Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa)
Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB)
Equivalent noise level: 18 dB-A to DIN 45 412
Signal/noise ratio (A-weighted): 76 dB
Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz
Electrical impedance: Recommended load impedance: >1.000 Ohms
Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15
Current consumption: Connector: 3-pin male XLR
Finish: satin nickel plated
Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.)
Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.)
Standard accessories: W 90 windscreen, SA 40 stand adapter |
The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.
- Pick-up pattern : super-cardioid
- Sensitivity in free field, no load (1kHz) : 10 mV/Pa +- 2,5 dB
- Nominal impedance : 200 Ohm (K6)
- Min. terminating impedance : 1000 Ohm (K6)
- Equivalent noise level : 20 dB
- Dimensions : d 44 x 131 mm
-
Weight :
|
The e 865 is a fully professional super-cardioid vocal microphone utilising the very best in condenser microphone technology to achieve new standards of quality and sound. The microphone capsule insorporates special blast/pop protiction plate to shield the diaphragm from excessive sound pressure levels. ON/OFF Switch.
- Pick-up pattern : super cardioid
- Sensitivity in free field, no load : (1kHz) 3 mV/Pa
- Max. Sound pressure level (aktiv) : 150 dB
- Nominal impedance : 200 Ohm
- Min. terminating impedance : 1000 Ohm
- Dimensions : d 47 x 193 mm
- Weight : w/o cable 311 g
- Frequency response (microphone) : 40.....20000 Hz
- Phantom powering : 12 - 48 V
|
The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.
The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.
The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.
- Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
- Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
- Mono compatibility ideal for broadcast applications
- 40 to 20,000 Hz frequency response
- Low noise and distortion
- Wide dynamic range
- Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
- Operates on phantom power or a 6V camera battery
- LED power indicator
- Internal shock mount for reduced stand vibration and handling noise
- Built-in "pop" screen
- Includes windscreen, swivel adapter, and Y-cable
|
Reviews
There are no reviews yet.