Content |
The SC4 is a high-quality shielded adaptor, designed to allow microphones with a 3.5mm output to connect to TRRS smartphones and tablets.
This is ideal for users wanting to connect their RODE VideoMic to their iPhone, and record using the RODE Rec app for iOS.
The gold-plated contacts are colour coded, with grey indicating the TRRS output.
While the SC4 was designed to operate with Apple iOS devices such as the iPhone and iPad, it is compatible with the majority of Android devices on the market.
Note that the SC4 is compatible with stereo microphones, with both left and right channels combined to a mono signal to be compatible with TRRS.
| Our power cable drums are assembled with a professional power cable and jacket made of rubber (H05RR-F) and also with a 3 x 1.5 mm² inner conductor cross-section. The four IP44 sockets are protected against water-spray and foreign objects such as sand f.e. The integrated overheat protection guarantees a quick swith off. This item is availabel in 25 m and 50 m.
Specifications
Product type
Pre-assembled Cables
Center conductor cross section
1.5 mm²
Number of internal conductors
3
| ARTLIGHT PB106-0150 PROLINK CABLE JACK Male 3.5mm - JACK Female 3.5 mm - 3m |
Never be without the right cable
Have you ever been in a situation where you didn't have the right cable for the job? With the iLine Mobile Music Cable Kit, you'll never be without options.
The kit is a complete collection of six high-quality audio cables (with a convenient travel case), designed to provide users of smartphones, tablets, MP3 players and laptops with the tools they need to handle virtually any signal routing and audio-cabling situation.
Think of iLine as the "Swiss Army Knife" of the cable world.
Gold record-ing
Gold is good for so many things, like completely changing the attitude of crusty old miners and crabby spouses. But it's especially suited for audio-cable termination (end) points due to its corrosion resistance properties. Plus, it just looks cool on a set of connectors.
Designed for pure audiophile sound, all iLine cables are made in Italy from high-quality components including 24K gold-plated connectors, high-purity copper conductors (you know, the "super-conductor" kind that doesn't oxidize), high-density shielding to protect against foreign sound particles, and low-capacitance insulation for transient preservation.
This combination of components gives you the best possible signal transmission for pure quality sound. The device connectors are also smartly designed to fit your smartphone case without being disconnected, and are color-coded for quick and easy identification of their functionality.
Tons of uses
The kit covers a wide range of mobile and audio applications, including hard-to-find ones like converting stereo signals to mono, extending a headphone cable (and still being able to use the built-in mic), or easily connecting your phone or laptop to DJ or home stereo gear.
Cables included in the iLine Mobile Music Cable Kit:
1. Mono Output Adapter
This cable converts 1/8" (3.5mm) stereo output to 1/4" (6.35mm) mono signal. Use this to send your stereo output from your device into a mono input device like a guitar amplifier or a mono-input powered speaker. Use it to connect your iRig and AmpliTube setup on your device to your guitar amplifier. It features a 3.5mm (1/8“) male connector and a 1/4" (6.35mm) mono female connector. (Use your standard 1/4" guitar or speaker cable to complete the connection.) Length: 11.8" (30cm).
| 2. Input Output Extension
Extends the range of your device output jack, including signal input and microphone capability. Use this one when you want to use your iRig, iRig MIC, iRig MIC Cast or headset with more room to move around, especially if you talk with your hands a lot. It features a TRRS Male and a TRRS female jack. Length: 23.6" (60cm).
| 3. Stereo Aux
You'll probably use this one the most. It's a simple, straightforward stereo output extender for sending the stereo signal from your device to a 3.5mm stereo input (female) jack. It features two 1/8" (3.5mm) male jacks. Length: 59" (150cm)
| 4. Headphone Splitter
As the name implies, this one takes a single stereo pair from your device and makes two out of it. Use this on long road trips with your kids (if they like the same movie) or just to monitor new songs you've written on your iPhone. This is a very handy cable. It features one 1/8" (3.5mm) TRS stereo male plug and two 1/8" (3.5mm) TRS stereo female jacks. Length: 11.8" (30cm).
| 5. RCA Output Adapter
If you want to connect your mobile device to your home stereo receiver or DJ Mixer, this is your cable. It splits the stereo output from your device into left & right mono RCA inputs. It features a 1/8" (3.5mm) male jack and two mono male RCA jacks. Length: 59" (150cm).
| 6. Mono Output Splitter
This one is perfect for sending the signal from your device to the L/R inputs in a stereo channel on a mixer. The unique 1/4" mono female jacks let you use your standard signal cables to freely place your device on stage while running your signal to the front of house mixer. It features a 1/8" (3.5mm) male jack and two 1/4" (6.35mm) female jacks. Length: 23.6" (60cm).
|
Color Coding Rings:
| Blue:
Stereo | | Green:
Stereo w/input | | White:
Mono/Left | | Red:
Mono/Right |
Even with the color coding, there might be times when you're not sure which cable to use in a specific situation. Hey, not everyone out there is super techy. But fear not, we have a great solution: a free interactive companion app called iLine Cable Kit, available for both iOS and Android.
| ARTLIGHT PB106-0150 PROLINK CABLE JACK Male 3.5mm - JACK Female 3.5 mm - 1,5m |
SENNHEISER X-SEN 81197 Connection cable receiver and camera for EW-100
3.5mm mini jack to 3.5mm mini jack
For Sennheiser Evolution Wireless (EK100 G2/EK500 G2 receiver). Connect EK Series receivers to audio inputs on camcorders.
|
Reviews
There are no reviews yet.