| Content | Precision Headphone Amplifier
- Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece
- Three switchable inputs (XLR, RCA, mini-jack)
- Solid steel housing
- Output impedance: 0.08 Ohm at 1KHz
- Frequency response: +/- 0.2 dB from 10 to 12,0000 Hz
- Power supply: 24 V via an external 6 W power supply (included) or via battery
- Dimensions (W x D x H): 165 x 117 x 48 mm
| LDHPA6 6-Channel Rackmount Headphone Amplifier
The LD Systems HPA 6 is a highly flexible 1U 19" rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications.
Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting and a 6.3 mm TRS Aux input with Main/Aux balance control for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones.
The HPA 6\'s main section features a master level control with eight-segment LED metering and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.
- Type: 6-channel
- Inputs: Main Input (Stereo), Direct In (Stereo), 6 x Aux In (Stereo)
- Input Connections: XLR and 6.3 mm jack L&R (Main Input, balanced), 6.3 mm stereo jack (Direct In), 6.3 mm stereo jack (Aux In)
- Input Impedance: 13 kOhm
- Line Outputs: Main Output (stereo, balanced)
- Line Output Connectors: XLR and 6.3 mm jack L&R
- Headphone Outputs: 6 x 3
- Headphone Output Connectors: 6.3 mm stereo jack
- Power Output: 6 x 125 mW
- Minimal Connected Impedance per Channel: 8 ohms
- Frequency Response: 20 Hz - 20.000 Hz
- Controls: Main Input Level, 6 x Input Mix Main/Aux, 6 x Headphone Level, 6 x Mono Switch, 6 x Mute L&R, Power
- Indicators: Main Input/Direct In Level Meter (8-segment LED chain), 6 x channel level meter (4-segment LED chain), 6 x mono LED, 6 x Mute L&R LEDs, Power LED
- Power Supply: IEC power socket
- Operating Voltage: 220 - 240 V AC, 50 - 60 Hz / 110 - 120 V AC, 50 - 60 Hz
- Power Consumption: 40 W
- Cabinet Material: metal
- Cabinet Surface: painted
- Width: 483 mm
- Height: 44 mm
- Depth: 217 mm
- Accessories (included): power cord
| Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
| Behringer HA-400 Ultra-Compact 4-Channel Stereo Headphone Amplifier
Mini to the max! You can use this super-compact stereo headphone amplifier with practically all headphones?four of them at the same time, to be exact! For example, you can let up to 4 different people in your studio listen to the main mix while the recording is being made, and each listener can determine his own volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are included for outstanding audio performance?these are the same op amps found in ?full-size? audio equipment?plus, a DC 12-Volt adapter is included.
If you are one of those musicians who like to deck out their equipment with lots of bells and whistles, the HA400 definitely makes a great addition to the functionality of your studio.
The Behringer HA400 offers flexible amplification for up to 4 headphones. Whether you're tracking a full band, playing to a backing track, or just listening to your mix, this compact amp gives every performer diverse volume control.
Hear everything with clarity. The HA400 promises high audio quality with zero interference, no matter what headphones you use. Behringer are relied upon by professional musicians everywhere. With the HA400 headphone amplifier, you'll become a part of 50+ years of innovation and expertise.
The Highest Quality Monitoring Possible
Great monitoring is at the heart of a tight performance. Whether you're on stage or in the studio, the HA4000 delivers ultimate control for everyone playing. Discover the highest quality audio from 4 high power, stereo amplifiers. Even at maximum volume, this tidy headphone amp provides clear sound without muddiness or unwanted noise.
Industry Leading Standard
There's a reason why Behringer are leaders in their field. With 50+ years of industry experience, they've built a legacy around exceptional build quality and innovative design. The HA4000 is no exception. Every channel preserves the original sonic qualities of your input signal. That's performance you can trust.
Features
- Ultra-compact headphone amplifier
- Ideal for stage or studio use
- Full control for every channel with 4 independent stereo high-power amplifier sections
- Extremely high audio quality with virtually all types of headphones, even at maximum volume
- 12V DC power adapter included
- Designed and engineered by Behringer in Germany
Specifications
Line Inputs
-
-
- Type: 1/4'' TS Jack, Stereo
- Impedance: 100kohms
- Max. input level: +15dBu
Headphone Outputs
-
-
- Type: 1/4'' TRS Jacks, Stereo
- Impedance: Approx. 80ohms
- Max. output level: Approx. 40mW in 100ohms
Power Supply
-
-
- Power supply: External power supply 12V
Dimensions/Weight
-
- Dimensions: 47mm (H) x 57mm (W) x 104mm (D)
- Weight: 0.32kg
|
- Distributes the signal of 1 audio source to 4 sets of headphones
- 4 channels with separate level controls and headphone outputs
- All connections via 6.3 mm (1/4“) jacks
- Operation via supplied power unit
|
The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.
HX-3 Key Features
Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.
The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.
The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1, and USBPre-2.
HX-3 Key Features List - Three isolated headphone outputs with individual volume controls.
- 125 dB dynamic range with flat frequency response.
- Durable 1/4-inch connectors, panel mounted for strength.
- Stereo or mono monitoring.
- Peak LED indicates headphone overload.
- Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
- Loop Output to connect additional HX-3's in series.
- All-metal connectors solidly mounted to the chassis for durability and RF immunity.
- Free from "Pin-1" grounding problems.
- Internal battery-power for up to 18 hours from two AA alkaline batteries.
- Chassis-isolated 5 to 18 VDC input for easy external DC powering.
- Power LED indicates low battery power.
- High strength, extruded aluminum chassis with protective metal end panels.
|
Reviews
There are no reviews yet.