RUPERT NEVE DESIGNS RNHP Headphone Amplifier

• Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece
• Three switchable inputs (XLR, RCA, mini-jack)
• Solid steel housing
• Output impedance: 0.08 Ohm at 1KHz
• Frequency response: +/- 0.2 dB from 10 to 12,0000 Hz
• Power supply: 24 V via an external 6 W power supply (included) or via battery
• Dimensions (W x D x H): 165 x 117 x 48 mm

The amPlug Twin rolls back the years to capture the sound of the legendary clean American dual speaker combo tube amp. Noted for its sparkling and sustained clean sound, this amp has been is widely used in many genres - rock, blues, jazz, country, and more. Raising the gain provides a powerful American tube overdrive sound. A stereo chorus effect is built into the amPlug Twin, adding natural spaciousness and depth to the sound. As you play these sounds, you're sure to forget the passage of time, and lose yourself in the tones loved by musicians in styles such as jazz, country, and blues.
Specifications

• Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
• Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
• Power supply: AAA batteries (x 2)
• Battery life: amPlug Twin (FX on):
• With zinc-carbon batteries: approximately 3 hours
• With alkaline batteries: approximately 11 hours
• Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
• Weight: 40 g/1.41 oz. (not including batteries)
• Included items: AAA batteries (X2) (for verifying operation)

The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.

Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.

The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.

The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1, and USBPre-2.

• Three isolated headphone outputs with individual volume controls.
• 125 dB dynamic range with flat frequency response.
• Durable 1/4-inch connectors, panel mounted for strength.
• Stereo or mono monitoring.
• Peak LED indicates headphone overload.
• Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
• Loop Output to connect additional HX-3's in series.
• All-metal connectors solidly mounted to the chassis for durability and RF immunity.
• Free from "Pin-1" grounding problems.
• Internal battery-power for up to 18 hours from two AA alkaline batteries.
• Chassis-isolated 5 to 18 VDC input for easy external DC powering.
• Power LED indicates low battery power.
• High strength, extruded aluminum chassis with protective metal end panels.

• Ultra-compact monitor headphone amplifier for studio and stage applications
• Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
• Flexible Mic In and Mic Through connectors plus Ground Lift switch
• Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch

• High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
• DC 12 Vadapter included
• 3-Year Warranty Program*
• Designed and engineered in Germany

MyMONITOR - Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR - Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)