| Content |
The Q7 dynamic microphone brings a high level of accuracy and audio performance
to vocal miking applications thanks to its low mass, neodymium element.The Q7 is
a hand held, dynamic microphone that excels in both live performance and recording
applications. Equipped with a linear frequency response for superior reproduction, it
is also designed to withstand high sound pressure levels. Extremely sensitive, it
employs a tight super-cardioid pattern to reduce feedback.A special shock-mounted
element minimizes handling noise and provides additional protection.
- Q7 Dynamic Mic
- Boom Mic Stand
- Durable Mic Clip
- 25' Low Noise Mic Cable
- System Gig Bag
FEATURES:
Ultra sensitive, neodymium element picks up all of the nuances of any performance.
Tight super-cardioid polar pattern minimizes feedback problems and effectively rejects
signals not originating directly in front of the mic capsule.
Extended range frequency response for optimum reproduction and exceptionally clear,
crisp sound.
Special shock-mounting allows movement of the mic element to greatly reduce handling
noise.
Rugged zinc alloy die-casting case ensures reliable performance in even the most
demanding environments
The Q7 can be mounted on any standard microphone stand (using the included mic clip).
Withstands high SPLs lending itself to a wide range of miking situations.
Included foam-lined, impact resistant carrying case for convenience when transporting
the Q7 microphone from venue to venue.
Gold plated XLR Connector.
ARCHITECT?S & ENGINEER?S SPECIFICATIONS
The Samson Q7 Shall be a vocal microphone designed for stage or studio use.
It shall have a low impedance design and a high level output due to its neodymium
mic element. The Q7 shall have a super-cardioid pickup pattern. The Q7 shall
come with an included mic clip
SPECIFICATIONS:
Type: Dynamic
Frequency Response: 80 Hz - 12 kHz
Polar Pattern: Super-cardioid
Output Impedance: 200Ω
Sensitivity: -54 dBV/Pa (2.2 mv/pa)
Connector: 3-pin gold plated balanced XLR male
Dimensions
Diameter: 2.09 in. / 53 mm
Total length: 6.09 in. / 180 mm
Weight: 370 g
|
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g
| The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
- Pneumatic shockmount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant microphone clip that rotates 180 degrees
- High quality, rugged, and reliable
- Cardioid dynamic
- Frequency response: 50 Hz to 15 kHz
Suggested Applications
Lead Vocals
Backup Vocals
Harmonica
| Frequency Range |
50 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Supercardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
80 Hz |
Performance
| Frequency Range |
70 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL |
| Impedance |
600 Ohms |
| Load Impedance |
2000 Ohms |
| Sensitivity |
2.6 mV/Pa |
| Signal-to-Noise Ratio |
76 dB A-Weighted |
| Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
| Weight |
11.29 oz / 320 g |
|
Electro-Voice Cobalt CO9
The Co9 is a favorite among vocalists across all musical genres.
Technical Specifications
Element: Dynamic Neodymium magnet structure
Frequency Response 50 Hz to 18 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (600 Ohms) Sensitivity Open Circuit Voltage 3.2 mV/PA (-50 dBV) re 1 Pa* 1 Pa = 94 dB SPL
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
Finish Durable polyurethane paint
Materials Die cast zinc housing
Dimensions Length 6.7 in. (170 mm) Diameter 2.1 in. (53 mm) Shank .85 in. (22 mm)
Weight Net 11.8 oz. (306 grams) Shipping 29.9 oz. (819 grams)
Accessories included Stand adaptor (black) Gig bag
| The Beta 87 microphone has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production. This long-standing favorite now features a new design and has been renamed the Beta 87A TM.
In response to user requests, Shure has redesigned this microphone by just slightly thickening the handle for a more comfortable feel when hand-held. In addition, the Beta 87A now includes the A25D break-resistant swivel adapter.
The Shure Model Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level (SPL) capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the "boomy" sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
- Smooth, tailored frequency response provides detail, accuracy, and warmth for vocals
- Extremely accurate supercardioid pattern at all frequencies provides the highest gain-before-feedback
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 to 20,000 Hz
|
Reviews
There are no reviews yet.