| Content |
The e 608 is a super-cardioid microphone ideal for almost invisible clip-miking
of woodwind (except certain Flutes), brass and drums. A newly developed clamp
and gooseneck mounting enables the capsule to be positioned close to the signal
source for high realism and high-level output.
Features
Rugged reinforced glass-fibre body
Shock-mounted capsule provides low sensitivity to impact and handling noise
Hum compensating coil
Extremely robust connection cable with XLR connector
Delivery Includes
1 e 608
1 microphone clip
1 pouch
Technical Data
Frequency Response 40.....16000 Hz
Sensitivity in free field, no load (1kHz) 0,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 17 x 185 mm
Weight w/o cable 20 g
|
Low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc. Connects to AKG bodypack transmitters. The CK 99 L provides a natural sound, with a slight rise above 10 kHz for added clarity. Its cardioid polar pattern and bass rolloff combine to suppress unwanted ambient noise. ![ck99l_akg_ck_99l_lavalier_speak]( "ck99l_akg_ck_99l_lavalier_speak") Hide and speak for house-of-worship, conference and theater applications The CK99 L is a condenser lavalier microphone with cardioid polar pattern. It provides a natural sound, with a slight rise above 10kHz for added clarity, perfect for applications in houses of worship, lectures and theaters.
Thanks to its small housing and the included durable metal clip, it can be inconspicuously and securely mounted on jackets and costumes. The CK99 L provides a professional three-pin mini XLR connector that fits the body pack transmitters of all AKG wireless microphone systems. Cardioid polar pattern
eliminates noise from the rear 125° pickup angle
for inexperienced or very vivacious talkers Small housing and durable metal clip
for inconspicuous, secure mounting Technical Specification | General | | Audio Frequency bandwidth | 15 to 18000 Hz | | Sensitivity | 8.8 mV/Pa | | Equivalent Noise Level | 34 dB-A | | Signal to Noise | 60 dB-A | | Electrical Impedance | 200 Ohms | | Recommended Load Impedance | 2000 Ohms | | | Polar Patterns | | Cardioid | ![]() | | | Powering Interface | | Voltage | 1.5 to 10 V | | Current | 2 mA | | | Audio Output | | Type | Mini XLR | | Gender | Female | | Contacts | 3-pin | | | Design | | | Dimensions / Weight | | Height | 23 mm | | Diameter | 8 mm | | Net Weight | 2.5 g | |
|
All models include foam windscreens, swiveling lapel clip, dual tie clip, magnet mount, and mini mount
Subminiature size (5.8 mm diameter x 11 mm height)
Electret condenser cartridge
Omnidirectional pattern
One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
Two sensitivities available:
--Standard: -40 dBV/Pa (for speech applications)
--Reduced: -50 dBV/Pa (10 dB more headroom for theater applications)
Interchangeable equalization caps for optimal clarity and response:
--Silver mesh cap provides a 4 dB boost in the 8-18 kHz range - typically used in applications that require a microphone to be head-mounted
--Gold mesh cap provides a 10 dB boost centered at 12 kHz - typically used in applications that require a chest-worn microphone
Black, beige, and white models are available
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens
Frequency response: 20-20,000 Hz
|
Shure WL-185 Lavalier Condenser Microphone
Models WL183, WL184 and WL185 are lavalier electret condenser mics designed for use
with a wireless body-pack transmitter. Each mic has a 1.2 meter (4 ft.) cable terminated
with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility.
WL185 (Cardioid):
Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise.
Use of windscreen highly recommended. Pickup angle: 130 degrees.
Type
Condenser (electret bias)
Frequency Response
50 to 17,000 Hz
Output Impedance
1800 ohms
Sensitivity (1 Pa = 94 dB SPL)
WL183: -40.0 dBV/Pa
WL184: -44.5 dBV/Pa
WL185: -45.5 dBV/Pa
Maximum Sound Pressure Level
WL183: 125.0 dB SPL
WL184: 129.5 dB SPL
WL185: 130.5 dB SPL
Output Noise (A-weighted)
WL183: 22.5 dB SPL
WL184: 27.0 dB SPL
WL185: 28.0 dB SPL
Dynamic Range
102.5 dB
Polarity
Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
Power Requirements
Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter.
|
- Miniature MU-55 is inconspicuous, lightweight and waterproof.
- Supplied with 4-pin mini XLR and fits all MIPRO bodypack transmitters.
- Featuring a smooth, warm, natural sound.
- Available in black or beige colors.
- Ideal for theater, houses of worship and educational applications.
| | Capsule Module | 4.5 mm Ø omni-directional condenser microphone | | | | Frequency Response | 40 Hz~20 kHz | | | | Sensitivity | -49±3 dBV/Pa (0dB=1V/Pa) | | | | Max. SPL | 135 dB (Typical，1%THD) | | | | Plug | 4-pin mini XLR or TA4F | | | | Color | Black or Beige | | | | Cable Length | 150 cm / 59 " | | | | Weight | Approx. 14 g / 0.5 oz | | | | Note | Refer to actual product in the event of product description discrepancy. |
|
- Extremely light, inconspicuous lavalier microphone
- Excellent audio quality across the full bandwith
Affordable professional miniature condenser microphone. Its broadband, flat audio reproduction in an omnidirectional format is ideal for all types of broadcast and theatrical applications. The sound is extremely open and natural, making it ideal for wireless or hardwire multi-mic situations. An attachment clip, tiepin, and windscreen are supplied with each C 417.
C 417 PP: For hardwire applications, with standard XLR connector for phantom powering. |
Reviews
There are no reviews yet.