The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency. The Titan can be dimmed from 0 to 100% and has a flash […]
The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency.
The Titan can be dimmed from 0 to 100% and has a flash speed of 1 to 13 times per second.
The ShowTec Titan Strobe comes with PX-1500 lamp.
1500W DMX Megastrobe.
Dimmable through controller.
For application areas such as: Party room; Decoration
Content
The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency.
The Titan can be dimmed from 0 to 100% and has a flash speed of 1 to 13 times per second.
The ShowTec Titan Strobe comes with PX-1500 lamp.
1500W DMX Megastrobe.
Dimmable through controller.
Speedcontrol: 1-15 flashes/sec.
Lamp included: Yes
Cameo THUNDER WASH 100 RGB
3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB
Strobe, Blinder and Wash Light all in one
132 RGB SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
Preprogrammed in LED PC-Control 512; Light Captain
For application areas such as: Clubs/dancing school; Stage; Rental
Very quiet working noise
Application possibility: Suspended; on stand
Power supply:
230 V AC, 50 Hz
Power consumption:
Max. 4500 W
IP classification:
IP20
Protection class:
Protection class I
Power connection:
Fixed Supply cord with open wires
Cable construction:
H07RN-F
Cable length:
Approx. 0,6 m
Fuse:
10 x 38 mm, 32 A Fuse replaceable
Flash rate:
0 - 20 Hz
Color generation:
Cold white (CW)
DMX channels:
1; 3; 4
DMX input:
1 x 3-pin XLR (M) mounting version
1 x 5-pin XLR (M) mounting version
DMX output:
1 x 3-pin XLR (F) mounting version
1 x 5-pin XLR (F) mounting version
Cooling:
1 x cooling fan
Control:
Stand-alone; DMX
Preprogrammed in:
LED PC-Control 512; Light Captain
Attachment system:
Mounting bracket
Display type:
LCD display
Material:
Metal; aluminum
Dimensions:
Width: 50 cm
Depth: 16 cm
Height: 27,5 cm
Weight:
6,35 kg
Noise classification:
Class 1 (very slight noise, suitable for noise-sensitive environments)
Illuminant
Nominal wattage:
3000 W
Base:
3 x Wires
Lamp type:
Gas discharge lamp
Energy efficiency class (A - G):
G
Mounting bracket
Diameter mounting holes:
5 x Ø13mm
Material:
Metal, 5 mm
• IP-54 Die cast housing • Powercon True1 in- and outputs • 28.000 Lumens • DMX & RDM Protocol
The XPLO-15 is a professional strobe from the Showtec Infinity range. It is designed for the most high demanding light designers and rental companies. But it\'s not only the powerful output that takes this strobe to a new level of quality. Every detail of the XPLO-15 is thought over to make this strobe the perfect choice for professionals. It runs on DMX and RDM protocol, the die cast housing is IP-54 rated and equipped with Neutrik Powercon True1 in- and outputs. The menu based on a color display will always be in the correct position due to its built-in gravity sensor. However it\'s a rugged and heavy duty housing the bracket keeps the unit in the correct position at all times. This heavy duty bracket is also very easy to fix with just one handling. The XPLO-15 has 4 dimming curves and separate strobe intensity, duration and rate parameters. Eight unique zones of control allow ultimate flexibility while unique built-in chases aid in creativity and simplicity. With over 28,000 lumens of output, the XPLO-15 rivals conventional strobes and retains dynamic looks whether washing a stage or pointing directly at an audience.
Specifications
Light Source LED System: 576 x 6500K Luxeon SMD Drive Current: 560mA Output: 28.000 lumen
Electrical Power Supply: 100-240 VAC, 50/60Hz Power Consumption: 155W Max
Control Control Mode: DMX512 or RDM DMX channels: 1,3,4,6,28
Physical Dimensions: 390 x 150 x 60 mm Weight: 5,4 kg Housing: Die Cast Aluminum Color: Black, powder coated Power Connectors: Neutrik Powercon True1 in-& output Data Connectors: Neutrik XLR 3pole Cooling: Convection
Rugged metal housing with universal mounting bracket
Low power consumption
The Thunder Wash 100 W is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 white 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 W comes with 3-pin XLR sockets for DMX input and output, 4 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
Type
Strobe / Blinder / Washer
Colour spectrum
white
Number of LEDs
132
LED type
0.2 W
Dispersion
80 °
Refresh rate
1 - 30 Hz
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
1-channel , 2-channel , 3-channel 1 , 3-channel 2
DMX Functions
Dimmer , Flash rate
Standalone modes
Dimmer Mode , Flash rate , slave mode , sound control
Controls
mode , Value Down , Value Up
Indicators
LED Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
30 W
Power connector
IEC power connector male
Housing material
metal
Cabinet colour
black
Dimensions without mounting bracket
Width
310 mm
Height
70 mm
Depth
70 mm
Weight
1,4 kg
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Daslight V3 fixtures
Reviews
There are no reviews yet.