| Content | The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency.
The Titan can be dimmed from 0 to 100% and has a flash speed of 1 to 13 times per second.
The ShowTec Titan Strobe comes with PX-1500 lamp.
1500W DMX Megastrobe.
Dimmable through controller.
Speedcontrol: 1-15 flashes/sec.
Lamp included: Yes | This basic strobe effect is perfectly suited for your private party room.
Thanks to the mounting bracket, it can easily be mounted to a wall or ceiling.
The flash frequency can be adjusted from 1-10 flashes per second using the rotary control.
Simple, compact strobe 52200611
- Small strobe effect with high output
- High-quality strobe flash tube
- Flash rate adjustable
- Lightweight plastic housing
- Control via stand-alone
- Strobe effect
- With a beam angle of 60°
- Very high color rendering index (CRI)
- With Mounting bracket
- For application areas such as: Party room; Decoration
Package contents
- 1 x device, 1 x mounting bracket, 1 x user manual
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
25 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class II |
| Power connection: |
Fixed power supply cord with Euro plug |
| Cable length: |
Approx. 0,9 m |
| Lamp type: |
Gas discharge lamp |
| Color of light: |
Cold white CW >5000 K |
| Flash rate: |
1 - 10 Hz |
| Control: |
Stand-alone |
| Beam angle: |
60° |
| Beam angle (1/2 peak): |
60° |
| Color rendering index (CRI): |
97 Ra |
| Construction: |
Tube |
| Wavelength: |
460 nm |
| Attachment system: |
Mounting bracket |
| Dimensions: |
Length: 13,7 cm
Width: 9,5 cm
Height: 8,8 cm |
| Weight: |
200 g |
| Mounting bracket |
| Diameter mounting holes: |
1 x Ø5mm |
| Material: |
Plastic, 3 mm |
|
- 3000 W flash tube already installed
- Elaborate reflector system
- Strobe effect; Blinder effect
- The device is cooled by cooling fan
- Control via stand-alone; DMX
- With Mounting bracket
- LCD display
- Dimmer electronic; effect speed adjustable; pulse effect adjustable
- Preprogrammed in LED PC-Control 512; Light Captain
- For application areas such as: Clubs/dancing school; Stage; Rental
- Very quiet working noise
- Application possibility: Suspended; on stand
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
Max. 4500 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class I |
| Power connection: |
Fixed Supply cord with open wires |
| Cable construction: |
H07RN-F |
| Cable length: |
Approx. 0,6 m |
| Fuse: |
10 x 38 mm, 32 A Fuse replaceable |
| Flash rate: |
0 - 20 Hz |
| Color generation: |
Cold white (CW) |
| DMX channels: |
1; 3; 4 |
| DMX input: |
1 x 3-pin XLR (M) mounting version
1 x 5-pin XLR (M) mounting version |
| DMX output: |
1 x 3-pin XLR (F) mounting version
1 x 5-pin XLR (F) mounting version |
| Cooling: |
1 x cooling fan |
| Control: |
Stand-alone; DMX |
| Preprogrammed in: |
LED PC-Control 512; Light Captain |
| Attachment system: |
Mounting bracket |
| Display type: |
LCD display |
| Material: |
Metal; aluminum |
| Dimensions: |
Width: 50 cm
Depth: 16 cm
Height: 27,5 cm |
| Weight: |
6,35 kg |
| Noise classification: |
Class 1 (very slight noise, suitable for noise-sensitive environments) |
| Illuminant |
| Nominal wattage: |
3000 W |
| Base: |
3 x Wires |
| Lamp type: |
Gas discharge lamp |
| Energy efficiency class (A - G): |
G |
| Mounting bracket |
| Diameter mounting holes: |
5 x Ø13mm |
| Material: |
Metal, 5 mm |
|
• IP-54 Die cast housing
• Powercon True1 in- and outputs
• 28.000 Lumens
• DMX & RDM Protocol
The XPLO-15 is a professional strobe from the Showtec Infinity range. It is designed for the most high demanding light designers and rental companies. But it\'s not only the powerful output that takes this strobe to a new level of quality. Every detail of the XPLO-15 is thought over to make this strobe the perfect choice for professionals. It runs on DMX and RDM protocol, the die cast housing is IP-54 rated and equipped with Neutrik Powercon True1 in- and outputs. The menu based on a color display will always be in the correct position due to its built-in gravity sensor. However it\'s a rugged and heavy duty housing the bracket keeps the unit in the correct position at all times. This heavy duty bracket is also very easy to fix with just one handling. The XPLO-15 has 4 dimming curves and separate strobe intensity, duration and rate parameters. Eight unique zones of control allow ultimate flexibility while unique built-in chases aid in creativity and simplicity. With over 28,000 lumens of output, the XPLO-15 rivals conventional strobes and retains dynamic looks whether washing a stage or pointing directly at an audience.
Specifications
Light Source
LED System: 576 x 6500K Luxeon SMD
Drive Current: 560mA
Output: 28.000 lumen
Electrical
Power Supply: 100-240 VAC, 50/60Hz
Power Consumption: 155W Max
Control
Control Mode: DMX512 or RDM
DMX channels: 1,3,4,6,28
Optical system
Dimmer: 0-100%
Strobe: 0.5 – 30Hz
Beam Angle: 115 degrees
Dimming curves: Linear, PL-Curve, S-Curve, Square-Curve
Physical
Dimensions: 390 x 150 x 60 mm
Weight: 5,4 kg
Housing: Die Cast Aluminum
Color: Black, powder coated
Power Connectors: Neutrik Powercon True1 in-& output
Data Connectors: Neutrik XLR 3pole
Cooling: Convection
Safety
Operation temperature: -20~40°C
Protection: IP-54
|
- Small strobe effect with high output
- High-quality strobe flash tube
- Flash rate adjustable
- Lightweight plastic housing
- Control via stand-alone
- Strobe effect
- With a beam angle of 60°
- Very high color rendering index (CRI)
- With Mounting bracket
- For application areas such as: Party room; Decoration
| Power supply: |
230 V AC, 50 Hz |
| Power consumption: |
20 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class II |
| Power connection: |
Fixed power supply cord with Euro plug |
| Cable length: |
Approx. 0,9 m |
| Lamp type: |
Gas discharge lamp |
| Color of light: |
Cold white CW >5000 K |
| Flash rate: |
0 - 10 Hz |
| Control: |
Stand-alone |
| Beam angle: |
60° |
| Beam angle (1/2 peak): |
60° |
| Color rendering index (CRI): |
98 Ra |
| Construction: |
Tube |
| Wavelength: |
480 nm |
| Attachment system: |
Mounting bracket |
| Dimensions: |
Length: 13,7 cm
Width: 9,5 cm
Height: 8,8 cm |
| Weight: |
200 g |
| Mounting bracket |
| Diameter mounting holes: |
1 x Ø5mm |
| Material: |
Plastic, 3 mm |
| Specifications:
Length: 425 mm without bracket
Width: 245 mm without bracket
Height: 240 mm without bracket
Weight: 7.5 kg without bracket
Power connection: 1.5 m cable tail, 14 AWG
DMX data in/out: 3-pin and 5-pin XLR sockets
Type: Xenon discharge
Approved lamps: MAX-15 Xenon (220-240 V power)
AC power (MAX-15 model): 200-240 V nominal, 50/60 Hz
Peak current consumption: 33 A
Main fuse (all AC power voltages): 20 AT (slow blow), 250 V
AC mains power cable: 14 AWG or 2.5mm2
Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply)
Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)
Blinder effect: Continuous with auto fade
Strobe intensity: Blackout - maximum
Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
CONTROL AND PROGRAMMING
Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
DMX channels: 1, 3, and 4 channel modes
Stand-alone control: Via N.O. or N.C. SPST switch
Stand-alone options: Selectable flash rate or blinder effect
Setting and addressing: LCD display
Protocol: DMX512
Receiver: RS-485
Optional spare parts:
Lamp tube
hanging Clamps
strobe light detonator ( small black box)
Packing list for each unit:
1pcs strobe light
1pcs dmx cable
1pcs manual book
| Application |
|
| Exhibition booth |
Indoor and outdoor party |
| Music show |
Live show |
| Cencerts |
Special events |
| Mobile DJ |
Wedding |
| Studio |
Meeting rooom |
| Theatre |
TV station |
| Ceremony |
Stage show |
|
Reviews
There are no reviews yet.