Content |
• IEC daisy chain
• Powerfull light output
• 168 CW LEDs
With built-in speed and intensity adjustments, the TechnoFlash 168 is a white, 2-channel DMX strobe light. With cool white LED and an elegant housing the Technoflash 168 is the right solution for mobile DJ, small clubs and fixed installation.
Specifications Power input: 100-250V AC, 50/60Hz
Power consumption: 32W
Light Source: 168 x 0,25W (20mA)
Lux @2m: 500
Control: Auto, Sound, DMX
DMX Channels: 2
Strobe rate: 0-12 Hz
Power connector: IEC in-&output
Data connector: In/Out (XLR 3 Pin)
Dimensions: 220 x 238 x 140mm
Weight: 1kg
| Compact strobe with 48 SMD LEDs, adjustable flash freuquency + DMX
- 48 powerful LEDs SMD cold white (CW)
- Strobe effect
- Control via stand-alone; DMX
- Preprogrammed in Light´J; LED PC-Control 512; Light Captain
- With Mounting bracket
Package contents
- 1 x light effect, 1 x user manual
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
20 W |
Protection class: |
Protection class I |
Power connection: |
Fixed power supply cord with safety plug |
Lamp type: |
LED lamp |
LED: |
48 x SMD cold white (CW) |
Flash rate: |
0 - 18 Hz |
DMX channels: |
3 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Control: |
Stand-alone; DMX |
Preprogrammed in: |
Light´J; LED PC-Control 512; Light Captain |
Attachment system: |
Mounting bracket |
Dimensions: |
Width: 23 cm
Depth: 9,5 cm
Height: 15,5 cm |
Weight: |
1,06 kg |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
• IP-54 Die cast housing • Powercon True1 in- and outputs • 28.000 Lumens • DMX & RDM Protocol
The XPLO-15 is a professional strobe from the Showtec Infinity range. It is designed for the most high demanding light designers and rental companies. But it\'s not only the powerful output that takes this strobe to a new level of quality. Every detail of the XPLO-15 is thought over to make this strobe the perfect choice for professionals. It runs on DMX and RDM protocol, the die cast housing is IP-54 rated and equipped with Neutrik Powercon True1 in- and outputs. The menu based on a color display will always be in the correct position due to its built-in gravity sensor. However it\'s a rugged and heavy duty housing the bracket keeps the unit in the correct position at all times. This heavy duty bracket is also very easy to fix with just one handling. The XPLO-15 has 4 dimming curves and separate strobe intensity, duration and rate parameters. Eight unique zones of control allow ultimate flexibility while unique built-in chases aid in creativity and simplicity. With over 28,000 lumens of output, the XPLO-15 rivals conventional strobes and retains dynamic looks whether washing a stage or pointing directly at an audience.
Specifications
Light Source LED System: 576 x 6500K Luxeon SMD Drive Current: 560mA Output: 28.000 lumen
Electrical Power Supply: 100-240 VAC, 50/60Hz Power Consumption: 155W Max
Control Control Mode: DMX512 or RDM DMX channels: 1,3,4,6,28
Optical system Dimmer: 0-100% Strobe: 0.5 – 30Hz Beam Angle: 115 degrees Dimming curves: Linear, PL-Curve, S-Curve, Square-Curve
Physical Dimensions: 390 x 150 x 60 mm Weight: 5,4 kg Housing: Die Cast Aluminum Color: Black, powder coated Power Connectors: Neutrik Powercon True1 in-& output Data Connectors: Neutrik XLR 3pole Cooling: Convection
Safety Operation temperature: -20~40°C Protection: IP-54
| The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency.
The Titan can be dimmed from 0 to 100% and has a flash speed of 1 to 13 times per second.
The ShowTec Titan Strobe comes with PX-1500 lamp.
1500W DMX Megastrobe.
Dimmable through controller.
Speedcontrol: 1-15 flashes/sec.
Lamp included: Yes | Specifications:
Length: 425 mm without bracket
Width: 245 mm without bracket
Height: 240 mm without bracket
Weight: 7.5 kg without bracket
Power connection: 1.5 m cable tail, 14 AWG
DMX data in/out: 3-pin and 5-pin XLR sockets
Type: Xenon discharge
Approved lamps: MAX-15 Xenon (220-240 V power)
AC power (MAX-15 model): 200-240 V nominal, 50/60 Hz
Peak current consumption: 33 A
Main fuse (all AC power voltages): 20 AT (slow blow), 250 V
AC mains power cable: 14 AWG or 2.5mm2
Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply)
Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)
Blinder effect: Continuous with auto fade
Strobe intensity: Blackout - maximum
Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
CONTROL AND PROGRAMMING
Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
DMX channels: 1, 3, and 4 channel modes
Stand-alone control: Via N.O. or N.C. SPST switch
Stand-alone options: Selectable flash rate or blinder effect
Setting and addressing: LCD display
Protocol: DMX512
Receiver: RS-485
Optional spare parts:
Lamp tube
hanging Clamps
strobe light detonator ( small black box)
Packing list for each unit:
1pcs strobe light
1pcs dmx cable
1pcs manual book
Application |
|
Exhibition booth |
Indoor and outdoor party |
Music show |
Live show |
Cencerts |
Special events |
Mobile DJ |
Wedding |
Studio |
Meeting rooom |
Theatre |
TV station |
Ceremony |
Stage show |
|
This model is a powerful DMX strobe that allows to control flash speed and dimmer.
It has two operating mode, by changing dip switch setting: self-test mode and DMX
mode |
Reviews
There are no reviews yet.