SHOWTEC 50364 DJ-Switch 10 – 10 channel switchboard

98.28 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DJ-Switch 10 10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

 

Read more

DJ-Switch 10

10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 50364 DJ-Switch 10 – 10 channel switchboard”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 50364 DJ-Switch 10 - 10 channel switchboard removeSHOWTEC 50622 PSA-631 With Ampère Meter in 5x63A Out 3x 32A -Used- removeWork ESD 10K Automatic Voltage Regulator removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeEurolite Board 6-S w-6x safety-plugs Power switch DJ Lighting removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- remove
NameSHOWTEC 50364 DJ-Switch 10 - 10 channel switchboard removeSHOWTEC 50622 PSA-631 With Ampère Meter in 5x63A Out 3x 32A -Used- removeWork ESD 10K Automatic Voltage Regulator removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeEurolite Board 6-S w-6x safety-plugs Power switch DJ Lighting removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- remove
ImageSHOWTEC 50622 PSA-631 with ampère meter70008275 switch dj light 6channel eurolite powersb-1100 eurolite power distributer 32A to 16a
SKU5036450622ESD 10KD1908BOARD 6-SW/6 XSB-1100
Rating
Price 98.28 incl. GR VAT 496.00 incl. GR VAT 814.00 incl. GR VAT 173.59 incl. GR VAT 74.40 incl. GR VAT 438.94 incl. GR VAT
Stock

In stock

Only 1 left in stock

Available on backorder

In stock

Available on backorder

Only 1 left in stock

AvailabilityIn stockOnly 1 left in stockAvailable on backorderIn stockAvailable on backorderOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description6-fold switching panel Fully cabled case with 6 safety-sockets For 16 A safety-plug 6 switches 6 fuseholders with 5 A
Content

DJ-Switch 10 10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

PSA-631 With Ampere Meter Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed together with leading rental companies the power distributors that will keep your power and equipment save. The PSA-631 gives you real-time voltage and amperage information during your show. Now you can monitor your setup and make sure that the power is correctly distributed at all times. SpecificationsFront: • Digital voltage & amperage-monitoring per Phase. • Residual current circuitbreaker FI 63A 4 pol. 0,03A • 4 x 32A ʽC' automatic fuses. Back: • Input: 1,5 m (5 wires) cable with CEE-socket 3 x 63A • Output: 4 pcs. CEE 3 x 32A socket Dimensions: 19" rackmount/3U Weight: 9,5 kg

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm

PDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19" powerdistributor (240V) for use in equipment-and effect-rack. It has 8 IEC outputs which can be switched by the switch on the front of the unit. Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment.   240 Volt 8 IEC Outputs

6-fold switching panel for separate switching of 6 safety sockets 70008275

6-fold switching panel for separate switching of 6 safety sockets

  • Fully cabled housing with 6 safety sockets
  • 6 switches
  • Control via on/off switch on device
  • With profile rails suitable for (19") approx. 48 cm units

Package contents

  • 1 x device, 1 x user manual
Power supply: 230 V AC, 50 Hz
Power consumption: 3680 W
Output power: Max. 1150 W per channal
Output current: Max. 5 A per channal
Power connection: Fixed power supply cord with safety plug
Cable length: Approx. 0,8 m
Power output: 6 x Safety contact (F), hinged lid mounting version fused
Fuse: 5 x 20 mm, F 6,3 A Fuse replaceable
Control: On/off switch on device
Control channels: 6
Diameter mounting holes: 4 x Ø5mm
Material: Metal
Color: Black, matte
Front panel width: (19") approx. 48 cm
Mounting height: Approx. 9 cm (2 U)
Mounting depth: 120 mm
Dimensions: Width: 48,3 cm Depth: 12,5 cm Height: 8,9 cm
Weight: 2,00 kg
Eurolite SB-1100 Practical 32 A distributor in 19" housing Practical 32 A distributor in 19" housing Specially designed for larger distribution needs 3 U necessary for installation 32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug 32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker The entire distributor is secured via 30 mA fault current circuit breaker 2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks Control lamps indicate each phase 6 safety sockets on the housing back (2 per phase) Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers With earthing screw in order to ground a rigg if necessary Power supply: 380-400 V AC, 50 Hz ~ Max. output/channel (safety socket): 3680 W Max. current/channel (safety socket): 16 A Max. output/phase: 7360 W Max. current/phase: 32 A Height: 3 U Dimensions (LxWxH): 482 x 295 x 132 mm Weight: 6.9 kg
Weight2.50 kg3.00 kg20.00 kg5.00 kg1.60 kg6.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 3.00 kg
Weight 20.00 kg
Weight 5.00 kg
Weight 1.60 kg
Weight 6.90 kg