The Single 3 is a one channel DMX dimmer which easily can be mounted to your fixture, this will make it directly dimmable by DMX. It has both Dim- and switch mode. Furthermore, it is possible to set a maximum level for the output. The Single 3 can be used with any fixture up to 10A.
Power input: AC 230V-50 Hz
Channel output: 10A
Fuse: F10A 250V 5 x 20 mm
Dimensions: 237 x 140 x 60 mm
Weight: 1,82 kg
- Can be loaded with 4.5 A per channel
- Total load: 16 A
- 3-Pin DMX input and output
- Protective contact Sockets on the side with protective flaps (blue)
- LED display with membrane keyboard
- Built-in microphone with sensitivity control for stand-alone mode
- Individual DMX addressing per channel
- Pre-programmable chaser (running light)
- Integrated chaser with speed control
- Dimensions (W x D x H): 20 x 6.5 x 18 cm
- Weight: 1.6 kg
- Made in Europe
4 channel Chaser up to 1,5 A pero channel.
8 prefixed programs
Functions: Full On/Stand By
Supply: 230 V AC
Max load: 16 A
Dimensions: 483 x 44 x 160 mm
Weight: 2.3 Kg
Showtec Single DP-1 1 Channel DMX Dimming/Switch Pack
One channel DMX Dimming/Switch Pack
• 512 DMX-channels
• Wall / Truss mounting
• 50 mm dimming slider
• Dim and switch
• Dimming pre-set
• Dimming limit
• Capacitive load 10A, Inductive load 5A.
Specifications Voltage: AC 230V-50 Hz (CE)
Channel-Output: 10A max.
DMX-Output: 3-pin XLR socket
DMX-Input: 3-pin XLR socket (male)
Fuse: F 10A 250V 5 x 20 mm
Dimensions: 195 x 105 x 90 mm (LxWxH)
Weight: 1,26 kg
The Showtec RP-405 MKII is a switch pack with built in relays and is very suitable to switch your LED lighteffects. As common switchpacks are not suitable to switch the low power of LED's, this RP-405 MKII is the right solution.
It brings 4 channels of each 5 Amp and each channel is patchable.
It can be controlled by DMX or by sound according to the built in patterns.
The speed of the patterns is adjustable between 20 seconds up to 2 minutes per step which makes this relay-pack very suitable for small venues because there is no need for an external controller.
Specifications Powerinput: AC 220V~240V / 50Hz
Power Consumption @ Full Load: 3450W
Power output: 5A each channel / 15A Max Total
Operation: build-in programs, auto run, slave, sound, DMX
DMX channels: 1, 2, 4 CH
Patchable per channel
Working environment: 0°C~40°C
Fixture Connection: XLR (3-pin) DMX in/out
Dimensions: 210 x 72 x 260 mm (LxWxH)
Weight: 2,84 kg
Work Unidim 2 One Channel Dimmer DMX 512
One channel dimmers with built-in drivers are on the increase in the spectacular lighting industry because of their multiple applications and easy use.
UNI DIM 2 is the second reference from Equipson?s catalogue with these characteristics.
With a weight of 1 Kg., this 10 A compact device with 1 DMX channel allows you to control any lighting apparel due to an easy configuration system, accessible trough three control buttons and a Led display.
The new UNI DIM 2 allows you to set the DMX address, the maximum output level, and brings you the possibility to manually control dimmering, even using it as a switch panel, multiplying his applications.
A security power output, a small size and tiny weight, and a specific design facilitates it?s installation on walls, roofs and structures where lighting controls doesn?t need to be complicated.
Its autonomy allows using UNI DIM 2 as a lighting support in already configured installations.
- 1 DMX channel Dimmer Pack
- 10 A power output
- Possibility to operate like driver unit
- Configuration of DMX adress, upper limit and prefixed value.
- Local dimmer control
- Upper plate for fixation elements
- Dimensions: 230 x 95 x 70 mm
Power supply 230V AC, 50 Hz ~
Max. power output 2300W
Max. total current 10 A
Number of channels 1
Output socket 1 safety power outlet
DMX output 3 pin XLR-mounting-plug
DMX input 3 pin XLR-mounting-jack
Dimensions 230 x 95 x 70 mm.
Weight 1 Kg.