| Content |
• Sealed optics
• DMX & ILDA control
• 20K Scanner pair
• 2 Auto & Sound shows, 86 built-in patterns
• Runs pre-programmed shows from SD card
• 1G SD card included
• Same personality as G300
The Galactic B1000 is a professional 1Watt Blue laser. Due to the strong 1W output this unit is capable of making great beam shows at in- and outdoor events. If you combine the B1000 with his brother G300 (51332) you can make more creative beam shows. The unit has a 20K scanner pair which makes bigger projections possible with less flickering. It can be controlled by DMX, ILDA or operate in stand-alone mode with a pre-programmed show on SD card.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 40 Watt
Laser Color: Blue 450nm
Laser Power: 1000mW
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-40˚
Control Modes: 2xAuto, 2xSound,
Master/Slave, DMX, ILDA,
SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin &
Sub-D 25 Pole
Safety Features: Key switch, Interlock,
Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2,
2007-03
Dimensions: 385 x 310 x 162 mm
(excl. bracket)
Weight: 8 kg
Accessories: 2 Keys, Interlock test
connector, 1G SD card
|
Name:Pure diode RGB5000 laser light
Laser power:5000mW
Color Blance:
Red>1000mw/638nm (
Green>1200mW/520nm OEM ( 3000mw/445 OEM ( |
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
This first of a kind laser uses a 5W blue LED, mixed with red and green laser beams to create mesmerising plasma type effects best viewed on a flat surface, such as a wall or ceiling. The effect rotates and changes constantly, the speed of which can be controlled manually on the unit to suit the mood. This laser, unlike standard lasers, does not require smoke to create the best effects, making it the most unique and desirable product on the market.
* Unique rotating plasma pattern effect (best viewed without smoke)
* Create a thunderstorm effect by manually controlling red and green strobe times and brightness of the blue LED
* 100mW red and 40mW green lasers
* 5W blue LED
* Manually control speed, brightness and strobe
* 3 modes of operation: Manual, Auto and Sound to light
* We recommend that this product is used within the guidelines HSG95
* Key controlled for laser emission safety
|
- Type : Multi Light Bar
- Number & Colors Led : 2X Rgb
- Led Power (W) : 9Watt
- Laser : 30Mw 532Nm Green, 100Mw 650Nm Red
- Strobe : 4 X 1 Watt White Leds
- Other : 3W Red, 3W Green & 3W Blue Led for every derby
- Control : Dmx512, Auto, Music, Master/Slave, Ir Remote Control
- Channels Dmx512 : 3, 5, 6, 9 or 27
- Input / Output Dmx512 : 3Pin xlr
- Power Input / Output : IEC
- Power supply (V) : 100/240 V ac, 50/60 Hz
- Consumption (W) : 48
- Dimensions (mm) : 1185 x 386 x 110
- Weight (kg) : 6.6 bar / 8.35 with case
|
RGB2w (Red500mw/638nm; Green: 500mw / 520nm; Blue:1000mw/450nm) 25kpps scanner ,LCD,SD,X/Y, RGB dimmer
Laser diode Laser power:2000mW
Color Balance:
Red>500mw/638nm ( 500mW/520nm OEM ( 1000mw/445 OEM ( |
Reviews
There are no reviews yet.