Content |
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
Polar Pattern |
Supercardioid |
Frequency Response |
50 Hz - 16 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms (290 Ohms Actual) |
Output Connectors |
XLR-3 Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
9.92 oz. (278 g) |
|
Electro-Voice Cobalt CO9
The Co9 is a favorite among vocalists across all musical genres.
Technical Specifications
Element: Dynamic Neodymium magnet structure
Frequency Response 50 Hz to 18 kHz
Polar Pattern Cardioid
Impedance Low-Z balanced (600 Ohms) Sensitivity Open Circuit Voltage 3.2 mV/PA (-50 dBV) re 1 Pa* 1 Pa = 94 dB SPL
Microphone Connector 3-pin, XLR-type
Polarity Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
Finish Durable polyurethane paint
Materials Die cast zinc housing
Dimensions Length 6.7 in. (170 mm) Diameter 2.1 in. (53 mm) Shank .85 in. (22 mm)
Weight Net 11.8 oz. (306 grams) Shipping 29.9 oz. (819 grams)
Accessories included Stand adaptor (black) Gig bag
|
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g
| Behringer Ultravoice XM8500 Dynamic Cardioid Microphone
With the BEHRINGER vocal microphone ULTRAVOICE XM8500, your voice will shine in a way it never has before, giving a powerful edge to your performances. Your creative energy and highly professional demands finally have a worthy partner. You want your voice to come across at its best, capturing your audience with its power and expression. No problem: with the ULTRAVOICE XM8500, you've got them in your hands.
Bringing out the subtlest nuances and placing them properly in the mix: that's what a good vocal microphone is all about. And that's exactly what the ULTRAVOICE does. Its cardioid characteristic picks up sound from the front with the utmost sensitivity, while strongly dampening sound from the back. This gives you more security against feedback. The integrated shock-mount system effectively reduces handling noise to an absolute minimum. The XM8500's balanced low-impedance output lets you connect it to any console or microphone preamp - provided it has enough dynamic headroom. You'll need plenty of that: the ULTRAVOICE is so powerful that you'll put your current favorite microphone in its box. Even if it cost ten times as much.
On stage, dependability counts. The ULTRAVOICE won't let you down. Its rugged construction protects it against the toughest changes you can put it through. The matte anodized surface reduces reflections from studio or stage lighting. The two-stage pop filter and tough steel mesh keep breath and pop noises out of the signal.
Dynamic vocal microphone with smooth mid-frequency presence rise for excellent vocal projection Internal shock mount system to cut down handling noise Cardioid characteristic minimizes background noise and feedback Ultra-low distortion for a super clean sound Microphone stand adapter included Ultra-professional dynamic vocal microphone 50 Hz - 15 kHz frequency response for crystal-clear, highly detailed vocals Super rugged, reliable metal construction and electromagnetic shielding High-level balanced output Two-stage pop filter minimizes breath and pop noises Sensitivity - 70 dB
Transducer |
Dynamic |
Polar Pattern |
Cardioid |
Frequency Response |
50 Hz to 15 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms |
Output Connectors |
Gold-Plated Pin XLR-3M Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
8.47 oz. (240 g) |
|
The RSM-120 goes strong due to its powerful sound characteristics: brilliant highs and treble, powerfull bass; all in all remarkable volume characteristics. And thanks to the marginal sensitivity playback is very balanced.
features:
* Dynamic cardiode microphone with switch
* Integrated XLR connection
technical data:
* Impedance:
* Frequency range: 60 Hz - 25 kHz
* Sensitivity: -52 dB +/-3 dB
* Incl. 5 m cable and a bag for easy transport |
The cardioid e 935 is a fully professional vocal microphone,
developed to cut through high on-stage levels.
Features
Rugged metal body
Advanced shock-mount design
Consistent on-/off-axis response
Hum compensating coil
Made in Germany
Delivery includes a pouch and a microphone clamp
Delivery Includes
1 e 935
MZQ 800 microphone clamp
Pouch
Technical Data
Pick-up pattern Cardioid
Frequency response (microphone) 40.....18000 Hz
Sensitivity in free field, no load (1kHz)
2,8mV/Pa bei 1 kHz = -51dB (0 dB = 1V/Pa) = -71 dB (0 dB = 1V/ubar)
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 47 x 181 mm
Weight 330 g
|
Reviews
There are no reviews yet.