Content | Features
Automatic Transmitter Setup instantly syncs the transmitter to the receiver frequency
LED indicator for control lockout, IR RF sync, low battery indicator
Powered by 2AA batteries
SM58 or VP68 microphone capsule options
Additional microphone capsules available as accessories: VP68, Beta 87A, Beta87C, Beta 58A, SM86
Specifications
Transmitter Type: Handheld
Dimensions: 254 mm x 51 mm
RF Output Power: 10 - 30 (country specific)
Battery, endurance: 2AA, up to 12 h
Weight: 290 g |
Shure SLX2-BETA87C-R5 Wireless Microphone
Features:
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Operating Range Under Typical Conditions
100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and
interference
Audio Frequency Response (+/? 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)
0.5%, typical
Dynamic Range
>100 dB A-weighted
Operating Temperature Range
?18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied
to tip of WA302 phone plug) produces positive voltage on pin 2 (with
respect to pin 3 of low impedance output) and the tip of the high
impedance 1/4-inch output.
SLX1 Bodypack Transmitter
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX4 Receiver
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): ?13 dBV
1/4 inch connector (into 3000 Ω load): ?2 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
?105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12?18 Vdc at 150 mA, supplied by external power supply
|
Product type
Wireless Microphone System Accessories
Type
Belt Packs
Transmission frequency range
863.000 - 865,000 MHz
Channels
16
Inputs
Mini-XLR (3-pin) with phantom power (for headset)
Frequency response
60 - 16.000 Hz
Rated HF output power
10
Controls
ASC , Mic / 0dB / -10 dB switch , Power
Indicators
power/battery status low (LED)
Operating voltage
2 x AA battery
Operating time
>10 h (with alkaline batteries)
Width
65 mm
Height
85 mm
Depth
24 mm
Weight
0,1 kg
Other features
incl. batteries , IR frequency synchronisation
|
UHF-R handheld transmitters boast a rugged, lightweight construction and an antenna design which advances RF transmission reliability. The transmitter design allows for interchangeable microphone cartridges. The UR2 is offered with BETA 87A, BETA 87C, BETA 58A, SM86, SM87A, SM58, KSM9 and VP68. For use with UHF-R Wireless Systems. UHF-R Wireless features KSM9 as the premier choice in handheld vocal microphones. Switchable RF power Frequency and power lockout Bit-mapped backlit LCD 2 AA batteries -- up to 9.5 hours continuous use Infrared automatic transmitter sync All metal die-cast construction Interchangeable cartridges: SM58, SM86, SM87A, Beta 58A, Beta 87A, Beta 87C, KSM9, and VP68
|
Product Highlights
3-pin XLR Input
Supports Dynamic Microphones (Only)
24MHz Operation
Compatible with SLX Series
960 Selectable Frequencies
12 Multiple Channels Per Band
25 Maximum Compatible Channels
Infrared Sync to Receiver
Battery Powered with AA Batteries x2
|
PT 4000
UHF bodypack transmitter with magnesium body
30 MHz wide UHF band with up to 1200 selectable frequencies
Backlit display and jog switch for ease of use
Operates for up to 15 hours on dry batteries, 12 hours on optional BP 4000 battery
pack and displays remaining battery life
Optional remote mute switch
The PT 4000 is a professional bodypack transmitter with a rugged die-cast magnesium
body. The 30 MHz wide UHF band provides up to 1200 selectable frequencies and
several preset frequency banks for various countries make it easy to set up a multichannel
system. A backlit display makes it very easy to tune the PT 4000 to the same frequency
as the SR 4000 receiver. A pilot tone system continuously transmits transmitter status
data including MUTE switch position and the remaining battery life to the receiver. Integrated
charging contacts let you charge the optional BP 4000 battery pack without having to
remove it from the transmitter.
An optional remote mute switch allows the user to mute the transmitter without having
to fumble for the on-board mute switch if the transmitter is hidden in the clothes.
Available microphones for PT 4000: C 411 L, C 416 L, C 417 L, C 418 L,
C 419 L, C 420 L, C 444 L, C 477 WR L, CK 55 L, CK 77 WR L,
CK 97-CVR WL
SPECIFICATIONS:
Carrier frequency range 650 to 680, 680 to 710, 720 to 750, 760 to 790,
790 to 820, 835 to 862 MHz
Modulation FM
Audio bandwidth 35 to 20,000 Hz
Selectable channels 1200
Max. channels for multichannel operation > 50
THD typ. |
Reviews
There are no reviews yet.