| Content |
General
|
| Product type |
Cone driver |
| Brand |
Sica |
| Reference |
8E2CS |
| Product code |
Z005110C |
Informations
|
| Nominal impedance |
4 ohm |
| Dimensional category |
8.5 inch |
| Manufacturer sensitivity |
96.7 dB |
| Calculated sensitivity |
95.59 dB |
| Nominal power handling |
130 W |
| Max power handling |
260 W |
Fundamental parameters
|
| Sd |
213.8 cm² |
| Mms |
19.5 gr |
| Cms |
280 µm/N |
| Le |
0.53 mH |
| Re |
3.07 ohm |
| BL |
10.33 T.m |
Small signal parameters
|
| Fs |
68.1 Hz |
| Qes |
0.24 |
| Qms |
9.71 |
| Qts |
0.23 |
| Vas |
18 L |
Datas
|
| Flux density |
1 T |
| Xmax |
±1.5 mm |
| EBP |
284 Hz |
| Fs / Qts |
296 Hz |
| Vas * Qts² |
0.96 L |
| Efficiency |
2.27 % |
| Calculated efficiency |
2.28 % |
| Weight |
~3.2 kg |
Dimensions
|
| Voice coil diameter |
2 inch |
| Outside diameter |
210 mm |
| Baffle cutout diameter |
179.5 mm |
| Depth |
91 mm |
| Front thickness |
8.5 mm |
| Depth after front |
82.5 mm |
| Diamètre aimant (mm) |
134 mm |
Shape & Materials
|
| Front chape |
Cylindrical |
| Magnet type |
Ferrite |
| Winding material |
Copper |
| Voice coil former |
Kapton |
| Surround shape |
Double roll |
| Surround material |
Cloth |
| Dome material |
Paper |
|
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 6.5 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 150 W
* Maximum Power Handling**** 300 W
* Sensitivity (1W/1m) 94 dB
* Frequency Range 80 - 6300 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.53“, 13.5 mm
* Magnetic Gap Depth 0.31“, 8 mm
* Flux Density 1 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 76 Hz
* DC Resistance (Re) 5.8 Ohm
* BL Product (BL) 9.86 N/A
* Diaphragm Mass inc. Airload (Mms) 20.9 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2.11 Kg/s
* Electromagnetic Q (Qes) 0.59
* Mechanical Q (Qms) 4.72
* Total Q (Qts) 0.53
* Compliance Equivalent Volume (Vas) 0.42 ft³, 11.9 dm³
* Surface Area of Cone (Sd) 31“², 200 cm²
* Maximum Linear Excursion (Xmax)* 5.42 mm
* Xdamage** 12 mm
* Coil Inductance (Le) 0.55 mH
* Diaphragm mass (Mmd) 19.4 g
* Eta Zero 0.85 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
-
- 8” neodymium magnet driver with 1.5” voice coil, providing 200Wrms (AES) continuous power handling
- Suitable for line array applications, utilizing a space-efficient octagonal chassis profile
- Optimized flux distribution in the magnet assembly provides low harmonic distortion
- M-roll surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
General specifications
| Nominal diameter (mm/in) |
203/8 |
| Power Rating (AES, W rms) |
200 |
| Nominal impedance (Ω) |
8 |
| Voice coil diameter (mm/in) |
50.8/2.0 |
| Magnet type |
Neodymium |
| Chassis type |
Cast aluminium |
| Sensitivity (dB) |
92 |
| Frequency range (Hz) |
70-6000 |
| Coil material |
Round copper |
| Cone material |
Kevlar loaded paper |
| Surround material |
Cloth-sealed |
| Suspension |
Single |
| Xmax (mm/in) |
4/0.16 |
| Gap depth (mm/in) |
8.0/0.32 |
| Voice coil winding width (mm/in) |
15.0/0.63 |
Small Signal Parameters
| D (m/in) |
0.17 |
| Fs (Hz) |
80.3 |
| Mmd (g/oz) |
22.39 |
| Mair |
1.94 |
| Qms |
1.33 |
| Qes |
0.59 |
| Qts |
0.41 |
| Re (Ω) |
5.85 |
| Vas (lt/ft3) |
11.3/0.399 |
| BI (Tm) |
11.22 |
| Cms (mm/N) |
0.16 |
| Rms (kg/s) |
9.6 |
| Le (mH) |
|
Mounting Information
| Overall diameter (mm/in) |
225/8.8 |
| Overall depth (mm/in) |
100/4.16 |
| Cut-out diameter (mm/in) |
187/7.4 |
| Mounting slot dimensions (mm/in) |
6.5/0.26 |
| Number of mounting slots |
8 |
| Mounting slot PCD/ width accross flats |
210/8.3 |
| Unit weight (kg/lb) |
1.52/3.34 |
|
- 2'' voice coil Kapton former
- Ventilated magnet and voice coil to reduce power compression
- 94.6 dB sensitivity
Manual/Εγχειρίδιο
|
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 5.9 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 200 W
* Maximum Power Handling**** 400 W
* Sensitivity (1W/1m) 92 dB
* Frequency Range 80 - 5000 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.76“, 19.3 mm
* Magnetic Gap Depth 0.27“, 7 mm
* Flux Density 1.05 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 74 Hz
* DC Resistance (Re) 5.1 Ohm
* BL Product (BL) 8.9 N/A
* Diaphragm Mass inc. Airload (Mms) 23 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2 Kg/s
* Electromagnetic Q (Qes) 0.69
* Mechanical Q (Qms) 5.30
* Total Q (Qts) 0.61
* Compliance Equivalent Volume (Vas) 0.32 ft³, 9 dm³
* Surface Area of Cone (Sd) 27.5“², 177.3 cm²
* Maximum Linear Excursion (Xmax)* 8.48 mm
* Xdamage** 12.9 mm
* Coil Inductance (Le) 0.6 mH
* Diaphragm mass (Mmd) 21.6 g
* Eta Zero 0.5 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Recone kit for FP8PR200 |
Reviews
There are no reviews yet.