SICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1”

(0 customer reviews)

Original price was: €23.00.Current price is: €18.44. incl. GR VAT

Only 3 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
1\’\’ voice coil aluminium fprmer Treated silk dome Ferrofluid in the air gap Ferrite magnet circuit 89.8 dB sensitivity GENERAL SPECIFICATIONS: Nominal Diameter: 85 mm Nominal Impedance: 8 Ω Program Power: 40 Watt Rated Power: 20 Watt Voice Coil Diameter 25 mm Sensitivity @ 1W/1m 89,8 dB Flux Density: 1,06 T Netto Weight: 0,260 Kg […]

 

Read more

  • 1\’\’ voice coil aluminium fprmer
  • Treated silk dome
  • Ferrofluid in the air gap
  • Ferrite magnet circuit 89.8 dB sensitivity

GENERAL SPECIFICATIONS:
Nominal Diameter: 85 mm
Nominal Impedance: 8 Ω
Program Power: 40 Watt
Rated Power: 20 Watt
Voice Coil Diameter 25 mm
Sensitivity @ 1W/1m 89,8 dB
Flux Density: 1,06 T Netto
Weight: 0,260 Kg

Manual

Weight 0.26 kg

Reviews

There are no reviews yet.

Show reviews in all languages (1)

Be the first to review “SICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1””

Your email address will not be published. Required fields are marked *

Quick Comparison

SICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1'' removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-1000 Driver 1.5", 140W, 109dB, 0.5-20kHz, Titanium diaphragm removeB & C Speakers DE-10 Driver 1" 20W, 107dB removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz remove
NameSICA Z009040C LP 85.25/95 TW 8Ω 100W DOME TWEETERS 1'' removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-1000 Driver 1.5", 140W, 109dB, 0.5-20kHz, Titanium diaphragm removeB & C Speakers DE-10 Driver 1" 20W, 107dB removeB & C Speakers DE-85 8 OMH Driver 140WRMS, 108dB, 500-18.000 Hz remove
Image
SKUZ009040C2450JDE-16DE-1000DE-10DE-85
Rating
Price Original price was: €23.00.Current price is: €18.44. incl. GR VAT Original price was: €1,550.00.Current price is: €1,465.00. incl. GR VAT Original price was: €120.00.Current price is: €99.20. incl. GR VAT Original price was: €584.03.Current price is: €524.22. incl. GR VAT Original price was: €58.28.Current price is: €52.45. incl. GR VAT Original price was: €241.80.Current price is: €206.66. incl. GR VAT
Stock

Only 3 left in stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityOnly 3 left in stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • 1\'\' voice coil aluminium fprmer
  • Treated silk dome
  • Ferrofluid in the air gap
  • Ferrite magnet circuit 89.8 dB sensitivity
GENERAL SPECIFICATIONS: Nominal Diameter: 85 mm Nominal Impedance: 8 Ω Program Power: 40 Watt Rated Power: 20 Watt Voice Coil Diameter 25 mm Sensitivity @ 1W/1m 89,8 dB Flux Density: 1,06 T Netto Weight: 0,260 Kg Manual
150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet assembly, 16ΩDE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.
280 W continuous program power capacity
1.5” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response

Driver 1" 20W, 107dB

40 W continuous program power capacity
1” horn throat diameter
25 mm (1 in) aluminium voice coil
Mylar diaphragm
1500 – 18000 Hz response
107 dB sensitivity

 

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Weight0.26 kg10.00 kg1.70 kg3.40 kg1.00 kg4.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.26 kg
Weight 10.00 kg
Weight 1.70 kg
Weight 3.40 kg
Weight 1.00 kg
Weight 4.50 kg