Content | Sommer Mistral MCF08 8-Way Multicore Cable (Part number: 100-0101-08)
SOMMER MISTRAL DOUBLE SCREENED JACKETED STUDIO MULTICORE This multicore encompasses all the highly desirable features of a multicore cable. The cable is very flexible and treadable using a rubber like jacket material. The overall foil screen virtually stonewalls any unwanted magnetic and RF fields (excluded on 40 pair). It is secured to the outer jacket so is automatically removed when the jacket is stripped. Connection is via a twisted drain wire. The same applies to the foil screen surrounding individual pairs. Their jackets are pre-numbered and colour coded in groups of eight for rapid identification. Conductors and drain wires are tinned to protect against corrosion and oxidation. Both DC and self capacity losses are held to new lows by the use of generous sized conductors and an advanced dielectric material.All copper strands are of oxygen free copper. Surge impedance 85 ohms.
Advantages:
- Additional insulation for each wire pair with a numbered and colour-coded PVC sleeve
- Very flexible and tread-resistant owing to the use of a rubberlike jacket material
- Simple and fast handling due to the use of compound foil and a pre-twisted drain wire
- High bending cycles due to the tightly stranded Cu litz wires
- Returns on the cable splice are instantly recognisable by the colour coding on the conductor pairs
- High transmission quality even with excess distances (low capacitance!)
- Affordable price
Application:
- Ideal for studio installation and permanent installation
- Fixed installation in theatres, public buildings etc.
- Construction of dependable cable reel systems
Name |
SC-Mistral MCF08 |
Construction |
[08(2LI2Y0,22mm²)(ST)Y]F(ST)Y |
Jacket Ø [mm] |
14,80 |
Number of Channels (audio) |
8 |
Weight per 1 m [g] |
256 |
Fire load per m [kWh] |
1,21 |
Width [mm] |
14,8 |
Height [mm] |
14,8 |
EAN |
4049371000604 |
Name |
SC-Mistral MCF |
Properties |
Analog |
Properties |
Digital 110 Ω AES / EBU |
Properties |
OFC oxygen free copper |
Application area |
Mobile outdoor / indoor |
Application area |
Installation |
Application area |
Studio / Broadcast |
Application |
Multipair |
Colour |
black |
Colour detailed |
black, mat |
Signal transmission |
symmetrical |
Jacket material |
S-PVC |
Inner conductor (audio) |
2 |
Inner conductor (audio) [mm²] |
0,22 |
Inner conductor Ø (audio) [mm] |
0,53 |
AWG (audio) |
24 |
Shielding |
AL / PT foil + total foil shielding + filler strand |
Copper strands (audio) |
7 |
Copper strand Ø (audio) [mm] |
0,20 |
Conductor insulation material |
Foam / Skin-PE |
Conductor insulation Ø [mm] |
1,60 |
UV-resistant |
yes |
Style variant |
round |
Shielding factor [%] |
100 |
Packing |
bulk stock |
Temperature min. [°C] |
-30 |
Temperature max. [°C] |
70 |
Capac. cond./cond. per 1 m (audio) [pF] |
46 |
Capacity wire/wire at 1 ft. (audio) [pF] |
14,0208 |
Capac. cond./shield. per 1 m (audio) [pF] |
85 |
Capacity wire/electic screen at 1 ft. (audio) [pF] |
25,908 |
Impedance [Ω] |
110 |
Insulation resist. per 1 km [GΩ] |
1 |
Insulation resist. per 1000 feet [GΩ] |
0,3048 |
Insulation resist. per 1 km (audio) [GΩ] |
1 |
Insulation resist. per 1000 feet (audio) [GΩ] |
0,3048 |
Conductor resistance per 1 km [Ω] |
80 |
Conductor resistance per 1000 ft. [Ω] |
24,384 |
Shield. resistance per 1 km [Ω] |
75 |
Shield. resistance per 1000 ft. [Ω] |
22,86 |
| Description:
This high temperature manicure sterilizer is designed to disinfect the nail tools and procedures, as well as for cleaning. the inner block thermal tank is made of stainless steel and it has a removable container for storage and sterilization instruments.
The temperature regulator + light indicator make it possible to adjust the appropriate temperature for sterilization. the temperature is determined depending on the material of the tool.
Features:
1.360 ° closed antivirus
2.200 ℃ high temperature
3. Intelligent timing design (0-60min)
4.2000ml large capacity
5. Iron shell, impact resistance, heat resistance, low temperature
6. Anti-slip tripod
Specification:
Model: CT-360T
Voltage: 110V / 220V
Power: 300W
Timer: 0-60 minutes
Material: iron, stainless steel
Plug Specifications: EU / US / UK Plug
Temperature: Up to 220 ° C
Weight: 4KG
Size: 31x18x12CM | ARTLIGHT STERPACK15 STERILIZATION PACKAGE INCLUDING PHILIPS 72617940 TUV 15W LAMP AND SINGLE TUBE MOUNT HOLDER BASE 45CM 1X15W
PHILIPS 72617940 TUV 15W SLV/25 UV-C Lamp G13 54V, MEDICAL Germicidal for universities, hospitals, jails and laboratories
TUV T8 lamps are double-ended UVC (germicidal) lamps used in professional water and air disinfection units. TUV T8 lamps offer almost constant UV output over their complete lifetime, for maximum security of disinfection and high system efficacy.
T8 G13 UV-C sterilization lamps TUV 15W G13 Philips 928039004005 8711500726179
Cap-Base G13
Bulb T26
Main Application Disinfection
Useful Life 9000 hr
Lamp Wattage 15W
Lamp Wattage Technical 15.9W
Lamp Voltage 54V
Lamp Current 0.34 A
Mercury (Hg) Content 2.0 mg
UV-C Radiation 4.9W
Base Face to Base Face A 437.4 (max) mm
Insertion Length B 442.1 (min), 444.5 (max) mm
Overall Length C 451.6 (max) mm
Diameter D 28 (max) mm
TUV T8 - Guaranteed lifetime simplifying planned maintenance in professional applications
-Security of effective disinfection over the useful lifetime of the lamp
-Maintenance can be planned in advance, virtually eliminating the need for expensive spot replacement of prematurely failed lamps
-High system efficacy because it is not required to over-design the purification system to maintain effectiveness of disinfection
-Good environmental choice because of lowest amount of mercury
Features
-Short-wave UV radiation with a peak at 253.7 nm (UVC) for disinfection purposes
-Protective inside coating ensures constant UV output over the complete lifetime of the lamp
-Long lifetime of 18.000 hours (based on operation on a Philips electronic driver)
-High reliability with the lowest percentage of lamps that fail prematurely in the market (90% of all lamps still operate on full output and quality after 15,000 hrs if operated on a Philips electronic driver)
-Special lamp glass filters out the 185 nm ozone-forming radiation
-High Output versions available for optimum UVC output per lamp length, allowing for reduction of system size
-Warning sign on lamp indicates that the lamp radiates UVC
Applications
-Air disinfection systems in professional applications such as universities, hospitals, jails and laboratories
-Upper air and whole room disinfection equipment in hospitals, intensive care units and surgery rooms
-Areas with low maintenance and/or disruptive costs
-Fish ponds and process water units
ARTLIGHT 01115 SINGLE TUBE MOUNT HOLDER BASE LED 45CM 1X15W
- IDEAL FOR FLUORESCENT LAMPS AND LED
- SINGLE LAMP
- LAMP LENGTH 45CM
- 1Χ15W
- STARTER IS NOT INCLUDED
- Contain Ballast 1x15w/ 230V / 0.31A / 50Hz / Cosφ 0.31 - Starter base (not the starter)
- Dimensions : 46cm (18") W x 5.5cm (2.2") D x 8.5cm (3.35") H
- Weight : 855 gr
| Gravity MADIS01B DISINFECTANT BASE 100x62mm UNIVERSAL BLACK SUITABLE FOR WAITING AREAS, RESTAURANTS, MEDICINES, SCHOOLS, SHOPPING CENTERS, SHOPS, etc.
Universal Disinfectant Holder Black
The Gravity MA DI S01 B is a stable universal disinfectant holder.
Due to different mounting options it is perfect for suspension in entrance and waiting areas Maximum hygiene for rooms with high visitor frequency such as shops, practices, gastronomy, hotels, schools, event halls, commercial and business premises. So you can easily store your e.g. Sterillium 500 ml neatly and always ready to hand.
Product type
Stands and Tripod Accessories
Interchangeable rings
2 x 20 mm
|
HNS 15W ofr G13 4008321770271 HNS-15-OFR Nominal voltage 55V Construction wattage 0.015 kW Construction voltage 55V Lamp current 0.33 A Nominal wattage 15W Nominal current 0.33 A Radiated power 200…280 nm (UVC) 4.9W Diameter 26.0 mm Length 438.0 mm Nominal lamp life time 8000 h Base (standard designation) G13 Burning position s180 Product benefits -Effective and environment-friendly disinfection without chemicals -Low mercury content -Long lifetime due to specific coating -Ozone-free Areas of application -Efficient disinfecting of air, water and surfaces Product features -Dominant wavelength: 254 nm (OFR version) Safety advice PURITEC germicidal lamps emit high-intensity UV radiation that can cause sunburn and conjunctivitis. The skin and eyes must therefore not be exposed to direct or reflected unfiltered radiation.
SKU |
G15T8 |
Cap/Fitting |
G13 |
cap description |
2 PINS 13MM APART |
Colour/Finish |
CLEAR |
length |
450mm |
Diameter |
26mm |
Wattage |
15W |
| This is a Philips TUV 30W ultraviolet germicidal lamp.
TUV T8 lamps are double-ended UVC lamps used in professional water and air disinfection units. TUV T8 lamps offer almost constant UV output over their complete lifetime, for maximum security of disinfection and high system efficacy. These lamps also have a long rated life for reduced maintenance costs.
TUV 30W 1SL Philips 30W, Sterilamp® T8 UV Lamp, Medium Bi-pin Base (G13). Germicidal UV-C lamp for air and water disinfection applications.
UV Lamp Model: G30T8 TUV 30T8
Part # 360164
Code # 726209 40
UV Lamp Length: 90cm - 36“
Effective Lamp Life: 8,000 hours
Lamp Base: Medium bi-pin
Lamp Diameter: 2.54cm - 1“
ProLampSales Order Code |
4253131112580 |
Brand |
Philips |
MPN |
360164 |
UPC |
8711500726209 |
Cap-Base |
G13 |
Color Code |
TUV |
Lamp Current (Nom) |
0.37A |
Main Application |
Disinfection |
Mercury (Hg) Content (Nom) |
2 |
Power (Rated) (Nom) |
30W |
Useful Life (Nom) |
9000h |
Voltage (Nom) |
102V |
|
Reviews
There are no reviews yet.