Sound Devices-USB Pre2 – Microphone interface

• Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad.
• Dynamic range greater than 114 dB (in 24-bit operation).
• Flat 10 Hz to 40 kHz (@96 kHz SR) audio bandwidth with very low distortion characteristics.
• Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections).
• Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources.
• High-output headphone amplifier can drive a wide range of headphones.
• Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs.
• Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephon

• Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers.
• Bus powering via USB for convenient, single-cable connection to the computer.
• In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter.
• Hardware loop-through for test and measurement to send computer audio directly back to an input.
• High-strength extruded aluminum chassis.
• Mac® OS X 10.4+, Windows®XP/Vista/7, and Linux, class-compliant audio device.
• Additional features controlled by hardware DIP switches on the back panel; no software-only features and no control panel.

MINIMUM SYSTEM REQUIREMENTS - Mac

    * OS X Leopard 10.5.8 or Snow Leopard 10.6.3
    * 1 GB RAM (2 GB recommended)
    * 6 GB free disk space
    * Intel® processor (no PowerPC® support)
    * One native USB port

MINIMUM SYSTEM REQUIREMENTS - PC

    * Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit Native, or Windows 7 64-bit Native
    * 1 GB RAM (2 GB recommended)
    * 5 GB free disk space
    * One native USB port

What's in the Box?

    * Mbox Mini interface
    * Pro Tools LE 8 software DVD-ROM installer (includes electronic versions of user guides, plus software plug-in bundle)
    * Mbox user guide
    * Registration information card
    * USB cable

UA-20: Audio Capture USB Audio/MIDI Interface Features

The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.

• Audio and MIDI in a compact unit.
• Fully equipped with I/O jacks.
• Great tool for creating music.
• Edirol's FPT Technology.

The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.

The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.

Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.

After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.

The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

Yamaha AUDIOGRAM3 Computer Recording System Specifications:

• Mic/Hi-Z input: 1
• Audio Format: USB AUDIO 1.1, 16bit/44.1kHz
• Combo Connectors: 1
• Stereo In connectors: Phone connector x 2 (L/MONO x 2, R x 2)
• USB Connector: To Host x 1
• Headphone connector: Stereo Phone connector x 1
• Stereo Out connector: Phone connector x 2 (L, R)
• Power Supply: USB powered
• Dimensions (W x H x D): 180 mm x 61 mm x 112 mm (7-1/8" x 2-3/8" x 4-3/8“)
• Accessories: CUBASE AI DVD, Owner's Manual, USB Cable
  
  System Requirements
• Windows Vista
• Windows-based computer with built-in USB interface
• OS: Windows Vista
• CPU: 1GHz or better Intel Core / Pentium / Celeron processor
• Memory: More than 1GB
  
  Windows XP
• Windows-based computer with built-in USB interface
• OS: Windows XP Professional / XP Home Edition
• CPU: 750MHz or better Intel Core / Pentium / Celeron processor
• Memory: More than 128MB
  
  Macintosh
• Macintosh computer with built-in USB interface
• OS: Mac OS X 10.3.3 or higher
• CPU: Intel CPU / Macintosh G3 processor 300 MHz or better
• Memory: More than 128MB
  
  Cubase AI4 System Requirements:
• 
  
• Windows
• OS: Windows XP Professional SP1 / XP Home Edition SP1 / Windows Vista (32-bit)
• CPU: Intel Pentium 1.4GHz or better
• Available Memory: More than 512MB
• Hard Disk: Free disk space of 1GB or more
• Audio Interface: Windows DirectX / ASIO compatible
  
  Macintosh
• OS: Mac OS X 10.4 or higher
• CPU: Power Mac G4 1GHz or Core Solo 1.5GHz or better
• Available Memory: More than 512MB
• Hard Disk: Free disk space of 1GB or more