| Content |
- Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, high-pass filters, and 15 dB pad.
- Dynamic range greater than 114 dB (in 24-bit operation).
- Flat 10 Hz to 40 kHz (@96 kHz SR) audio bandwidth with very low distortion characteristics.
- Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections).
- Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources.
- High-output headphone amplifier can drive a wide range of headphones.
- Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs.
- Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephon
- Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers.
- Bus powering via USB for convenient, single-cable connection to the computer.
- In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter.
- Hardware loop-through for test and measurement to send computer audio directly back to an input.
- High-strength extruded aluminum chassis.
- Mac® OS X 10.4+, Windows®XP/Vista/7, and Linux, class-compliant audio device.
- Additional features controlled by hardware DIP switches on the back panel; no software-only features and no control panel.
| U-CONTROL UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output and Massive Software Bundle
Behringer U-Control UCA202
- 2 In/2 Out USB Audio Interface
- Mac or PC, no drivers required
- 16-bit/48kHz converters
- Low latency
- Headphone output
- S/PDIF optical out
- USB powered
- Free Software
- Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Works with your PC or Mac computer—no setup or drivers required
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor both input and output
- Additional S/PDIF optical output for direct digital conversion
- Powered via USB—no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The Smallest, Most Portable 2x2 USB Interface Around!Are you looking for a simple upgrade to your computer's stock audio hardware? Do you want to record high-quality stereo audio to your laptop? Are you searching for the most affordable audio interface for computer DJ applications? The Behringer UCA222 USB Audio Interface does all this and more in one of the smallest, simplest, and lowest-priced packages around. It's a quick, simple, reliable solution for a wide range of audio applications.
High-Quality, Industry Standard ConnectionsLook at your computer's audio output. What is it? A 1/8-inch mini stereo jack, most likely. That's fine for plugging in headphones, but a terrible way to connect to external sound systems, stereos, PAs, mixing boards, or any other audio hardware. The UCA222 easily connects to your outboard pro audio gear, and you even get an optical S/PDIF digital output for connecting to high-end digital equipment. Now, take a look at your computer's input. If it has one at all, it's most likely the same deal -- 1/8-inch mini-jack. Again, the Behringer UCA222 provides universally recognized RCA inputs for bringing a wide variety of audio sources and equipment into your computer for pristine recording. You also get a dedicated headphone output for direct monitoring of both the ins and the outs on the UCA222.
Greatly Improved AudioYou computer's built-in audio system has a number of limitations, especially if your computer is a laptop. Machine noise and other electrical interference can disrupt, distort, or otherwise ruin recording and critical listening and playback situations. The Behringer UCA222 solves this problem by placing your sound card at the end of a USB cable run far from your machine's noisy electrical components. It seems like a such a simple solution, but this arrangement greatly reduces interference and provides a wonderfully low noise-floor for recording and professional playback. The UCA202 provides analog-to-digital audio conversion at 48 kHz or 44.1 kHz sampling rates and 16-bit resolution.
Super Simple Setup
As a USB device, the UCA222 is the textbook example of a Plug-N-Play device. Compatible with both Windows and Mac systems, the UCA222 requires no additional software drivers to work. Relying on your operating system's sound architecture, the UCA222 is instantly compatible with just about every audio software on the market, from multitrack DAWs like Logic and Cubase to audio editing programs like BIAS to DJ software like Itch. Spend time making music, not troubleshooting your hardware.
The applications for the Behringer UCA222 USB Audio Interface are practically limitless. Whether you're an electronic music producer, latptop DJ, mix engineer, audio archivist, or just a lover of music, the Behringer UCA222 is just about the easiest way to add a professional audio interface to your computer. |
The all new 896mk3 FireWire audio interface delivers high-end performance, superb sound, innovative new features and enhanced standard features that remain unique.
The 896mk3 provides eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.
The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
When recording from the mic/guitar inputs, the 896mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
| GUITAR LINK UCG102 The Ultimate Guitar-to-USB Interface to Jam and Record with Killer Modeling Amps and Effects
- Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
- Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
- Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
- Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
- Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
- Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
- Powered via USB—no additional power supply required
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The UCG102 is a USB interface that, like a guitar amp, receives signal from your guitar via a 1/4" input jack. A built-in USB cable then sends signal directly to your computer, where the amazing included software package simulates guitar amps and stomp boxes, in addition to tracking your latest masterpiece. It has a 1/4" headphone jack and PHONES volume dial so you can monitor your performance as you record, a CLIP LED to tell you when your signal is too hot, and a HI/LO level selector.
Super Software
The UCG102 comes packaged with Native Instruments' "Guitar Combos" software that models guitar amps and stomp boxes. Take your pick of the "PLEXI COMBO“, "TWANG COMBO” or "AC BOX COMBO” for stunningly real amplifier tones. Sample them all, then activate the full version of the classic rockin' "AC BOX COMBO" rig. Native Instruments extends special offers to all registered Guitar Combos users, making it more affordable than ever to take advantage of their award-winning GUITAR RIG software packages. Visit http://co.native-instruments.com/index.php?id=4101&prid=247&redirected=1 for the latest special pricing on this incredible software.
You also get energyXT2.5 BEHRINGER Edition, a multi-track recording program.
This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://www.behringer.com/EN/Support/energyXT.aspx. |
Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.
The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.
The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.
|
MINIMUM SYSTEM REQUIREMENTS - Mac
* OS X Leopard 10.5.8 or Snow Leopard 10.6.3
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One native USB port
MINIMUM SYSTEM REQUIREMENTS - PC
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit Native, or Windows 7 64-bit Native
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One native USB port
What's in the Box?
* Mbox Mini interface
* Pro Tools LE 8 software DVD-ROM installer (includes electronic versions of user guides, plus software plug-in bundle)
* Mbox user guide
* Registration information card
* USB cable
|
Reviews
There are no reviews yet.