Description | |
- ECC81/12AT7-CZ
- Premium Selected
- Optimised for use as a balanced phase driver
- Also provides powerful amplification, which ideally meets the special requirements as a driver tube for the improved dynamics of the output stage
| |
- Very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness.
- Selected and recommended for guitar amps to improve overall response.
- Best for clean tones as well as for those deep-bass required for modern preamps.
- The TAD 12AX7A-C became the 1st choice for Boogie®, Brunetti®, Diezel® , Engl®, Fender®, Hughes & Kettner®, Koch®, Laney®, Marshall®, Soldano®, Trace Elliot® and so many more.
| | |
Content | Product information "EL84-STR REDBASE TAD PREMIUM"
The all new TAD-EL84-STR REDBASE brings together the best of both - the famous EL84-Cz and the EL84M. We opted for the thickest glass possible and the heaviest construction available, just like the Russian EL84M, and combined these features with the sonically most promising cathode plate options, in order to meet and exceed the tonal quality of the EL84-Cz especially with regard to its linearity over the entire frequency range. Finally we added the gold grid wire in order to improve overall reliability. The sound can be described as very harmonic in the middle and treble frequencies, without adding too much power to the bass. The result is the best EL84 in current production.
No Compromise!
note:
Due to its diameter of 22.5mm, the TAD EL84-STR does not fit into older Marshall DSL401 made till week #20 in 2014 and UK made VOX AC15 TBX amplifiers of the same time range.
The tube which did fit these amps is the Ei EL84 or certain NOS models. All new production of EL84 do use the 22.5mm standard.
Later versions of these amplifiers have been updated to accept 22.5mm diameter tubes with no problem.
*Package includes 1 piece of EL84-STR and not matched pair
Tube Type: |
EL84/6BQ5/6P14P/N709 |
Socket: |
9 Pin(Noval) |
Selection: |
Premium |
| The JJ ECC81 / 12AT7 tube is a low noise and low microphonic preamp tube. A good choice for phase inverters and reverb circuits calling for 12AT7 tubes.
- 9 pin miniature preamp tube (amplification factor = 60),
- Less gain than a 12AX7
- Preferred by blues and jazz guitarists alike
Socket: |
Noval(9 Pin) |
Tube Type: |
12AT7/ECC81/6201 |
| 12AU7 / ECC82.
A lower-gain substitute for the 12AX7/7025 preamp tube. Good for a cleaner, quieter sound.
Electro-Harmonix sound effects are world renown for the soulful warmth of their analog sound and their line of "EH" premium tubes continues in this tradition of classic tone. | Product information "12AX7A-C / ECC83 TAD Premium Selected"
Perfect V2+ Preamp Tube - Good Gain - Tight Deep Bass - Fat Mid-range!!
The TAD 12AX7A-C / ECC83 TAD Premium Selected provides very good gain, tight deep bass, fat mids and silky top end with overall definition and brightness.
Selected with balanced systems and recommended for guitar amps to improve overall response.
Best for clean tones as well as for sounds requiring deep-bass power like any modern preamp.
Recommended for all positions in amps with medium gain level or High-Gain Amps for V2+ positions.
As for V1 in general, but especially for higher gain amps or phono/audio-amps, we recommend the RT010 7025 Highgrade, the RT030 E83CC/7025 Highgrade or RT093-HG 7025-WB Highgrade
The TAD 12AX7A-C can replace any 7025, 12AX7WA, 12AX7WB, 12AX7LPS, 12AX7EH, ECC83 or E83CC.
1st choice for:
Blackstar®, Boogie®, Diezel®, Engl®, Fender®, Hughes & Kettner®, Koch®, Laney®, Marshall®, REVV®, Soldano®, Two Rock®, VOX® and so many more.
All preamp tubes labeled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Balanced Output Test
Premium Selected
We call the tubes SELECTED which have passed above tests and thus qualify as reliable all-round tubes of their type.Typically this is around 30-60% from a batch that receives the SELECTED label from TAD.
For applications in particularly sensitive functions such as V1 or input stage with combo amps, V1 in high-gain amps, tube microphones and phono preamps, we recommend using the respective HIGHGRADE selection
Matching and Selecting Options for Preamp Tubes
Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.
This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems.
TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties)
for the quality criteria mentioned above.
Tube Type: |
12AX7/ECC83/7025 |
Socket: |
Noval(9 Pin) |
Selection: |
Premium |
| The TAD JJ EL34 Quartett Matched Tubes
The JJ Electronic EL34 is another classic from JJ.
This tube features a rugged construction leading to an incredibly reliable EL34 with astonishing tone.
Overall the sound is nicely balanced with tight lows, a rich and dynamic mid range and clear highs.
The JJ EL34 is a great replacement for guitar amplifiers and stereo amps.
Base: OCTAL uf = 6,3 V I f = 1,5 a Typical Characteristics: ua = 250 V ug3 = 0 V ug2 = 265 V ug1 = from -10 to -13,5 V (for eL34) from -13,5 to -16,5 V V (for e34L) I a = 100 ma I g2 = 14,9 ma S = 11 ma/V R i = 15 kΩ μ g2/g1 = 11
Limiting Values: ua0 = 2000 V ua = 800 V W a(max) = 25 W ug20 = 800 V ug2 = 450 V W g2(max) = 8 W I k = 150 ma uk/f = 100 V R k/f = 20 kΩ Capacitances: c g1 = 15,5 pf c a = 10 pf c a/g1 = 1,3 pf | A rugged russian tube by Electro Harmonix.
Some claim the 6L6EH has been "Modeled after the vintage RCA 6L6GC "blackplate" and the 6L6EH features large plate dimensions".
To see what a real blackplate looks like see the picture on the right showing a RCA and a TAD blackplate small bottle 6L6.
Both are real black plate constructions and great for vintage guitar amps for pleasing smooth and fine complex tone structure. Best for any classic Fender Amplifier.
The 6L6EH is a very good choice for more modern hard rocking guitar sounds and recommened for this.
Tube Type 6L6/5881
Socket: Octal(8pin)
|
Reviews
There are no reviews yet.