Content |
Mackie Tapco J800 Juice Power Amp When it comes to power amps, it?s all about power, reliability and price. Thankfully, TAPCO?s new Juice Series?the J-800, J-1400 and J-2500 delivers on all fronts. In developing these amps, we devised a rigorous power amp test which was literally un-passable by dozens of name-brand amps on the market today. Their new Juice Series passed the test with flying colors. It?s pure premium power. Features:
-J-800 800W @ 4 Ohms bridged -Easily switchable mono/stereo/bridged mono operating modes -Separate Speakon? outputs for Channel A and Channel B -Third Speakon output for mono bridged applications: also provides both output channels on a single NL4 connector -30Hz subsonic filter for low-frequency speaker protection -Handles for easy transport and protection of level controls -Defeatable clip limiter -Front-panel signal and overload indication
Weight: 19.8 kg |
VLP Series Powere Amplifier
Output Power: 300W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD 200W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 600W RMS @ 8 Ohms, 1K Hz, 1% THD
Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
Slew Rate: 15V Per usec
Damping Factor @ 8 Ohm: 300
Impedance: 20 Ohms balanced / 10 Ohms unbalanced
Cooling System: 2 indivdual fans
Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift Limiter
Dimensions (LxWxH): 14" x 19" x 3.5" / 360 x 482 x 88mm 2-rack mount spaces
Weight: 33 lbs. / 15 Kgs.
Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift; Limiter
|
The high efficiency of the ED series enables maximum efficiency with low heat generation.
A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.
AMPLIFIER SPECIFICATIONS |
---|
Power output stereo 4Ω: | 2 x 300 Watt rms | | Power output stereo 8Ω: | 2 x 180 Watt rms | | Power output bridged 8Ω: | 600 Watt rms | | Frequency Response: | 20 Hz ÷ 20 kHz | | Signal/noise rate: | > 105 dB | | Crosstalk: | > 70 dB | | Distortion (THD+N): | | | Intermodulation: | | | Damping factor: | 200:1 (8 Ω) | | Slew rate: | 50 V/μS | |
INPUT SECTION |
---|
Input connector: | 2 x XLR balanced, 6,3mm jack unbalanced | | Input sensitivity: | 0 / 0.775 dBm/V RMS | | Input impedance: | 10.000 kΩ | | Controls: | Volume control for each channel | |
OUTPUT SECTION |
---|
Output connector: | 2 x Neutrik Speakon 4 ways | |
SYSTEM PARAMETERS |
---|
Cooling: | Two-speed fan | | Protections: | Temperature, DC, RFI short circuit, Soft-Start thermal on transformer | | Amplifier class: | H | |
POWER REQUIREMENT |
---|
Operating voltage: | 220÷240 / 110÷120 ~ 50 / 60 V ~ Hz | | Max.current: | 6 A | | Power Consumption: | 1300 W | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 88 / 3.46 mm/inch | | Width: | 483 / 19.01 mm/inch | | Depth: | 350 / 13.77 mm/inch | | Net Weight: | 11.45 / 25.24 Kg/Lbs | |
SHIPPING INFORMATION |
---|
Package height: | 120 / 4.72 mm/inch | | Package width: | 540 / 21.25 mm/inch | | Package depth: | 470 / 18.05 mm/inch | | Shipping Weight: | 13.81 / 30.44 Kg/Lbs |
|
The model L 500 is a 2 x 250 Watts Power Amplifier. Linear Precision Series power amps combine excellent audio performance, modern and innovative circuit design, meticulous and exceptionally rigid construction, and the highest levels of operational integrity and reliability with an appropriate and more than realistic price. The robust steel chassis provides outstanding torsional strength through L-shaped side panels reaching under the thick aluminium front panel. Thermal breakers prevent the power supply units from being damaged by thermal overload. Electronically controlled fans provide sufficient front-to-rear airflow and a special cool air diverter takes care of thermal stability. The fans? noise-level is extremely low which provides the possibility for studio use. If necessary, a supplied air-filter can be mounted behind the front panel ventilation louvres. Features * Excellent audio performance * Symmetrical topology * Ultra-low distortion * Generously dimensioned power supply units * Suitable to be operated on loads down to 2 ohms * Suitable to drive complex loads with phase angles of ± 90 degree * Extensive protection circuitry * Unique Back-EMF protection * Switchable limiters * Switchable Hi/Lo-Cut filters * Robust steel chassis * Exceptional low noise front-to-rear air-flow * XLR-type inputs and direct-outs * LED display shows On, In, Out, Limit and Protect * Highly reliable operation
Specs * Max. Output Power - into 8 ohms : 2 x 180 W at 1 kHz / THD = 1.0% * Max. Output Power - into 4 ohms : 2 x 280 W at 1 kHz / THD = 1.0% * Max. Output Power - into 2 ohms : 2 x 320 W at 1 kHz / THD = 1.0% * Max. Output Power - into 8 ohms bridged : 1 x 560 W at 1 kHz / THD = 1.0% * Max. Output Power - into 4 ohms bridged : 1 x 640 W at 1 kHz / THD = 1.0% * Rated Output Power - into 8 ohms : 2 x 175 W at 20 Hz - 20 kHz / THD = 0.1 % * Rated Output Power - into 4 ohms : 2 x 250 W at 20 Hz - 20 kHz / THD = 0.1 % * Rated Output Power - into 2 ohms : 2 x 300 W at 20 Hz - 20 kHz / THD = 0.1 % * Rated Output Power - into 8 ohms bridged : 1 x 500 W at 20 Hz - 20 kHz / THD = 0.1 % * Rated Output Power - into 4 ohms bridged : 1 x 600 W at 20 Hz - 20 kHz / THD = 0.1 % * Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz * Phase Angle Response : ± 30 degree/20 Hz.....20 kHz * Maximum Output Level : 45 V / RMS before clipping, no load, ref. 1 kHz / THD = 1% * Voltage Gain ref. 1 kHz : 26 dB (constant gain option) * Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz * Maximum Input Level : +21 dBu / 8.7 V * Input Impedance active balanced : 20 kohms * THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz * IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output * Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, A-weighted, RMS, input sensitivity +6 dBu * Attenuation at rated output : > 70 dB f = 1 kHz * Damping Factor internal 1 kHz : > 300 * DIM 30 : < 0.01 % * DIM 100 : < 0.01 % * Slew Rate internal : > 25 V / ?s * Power Consumption : 300 W 1/8 rated output into 4 ohms * Width : 483 mm * Height : 88.1 mm * Depth : 426 mm * Weight : 14 kg |
A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange, and superbly defined highs. They also deliver fast response and exceptional stability even in the face of serious power supply limitations. Refinements throughout this expanded five-model lineup make these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Output Power: 2 x 250 Watt / 8Ω RMS, 2 x 450 Watt / 4Ω RMS, 900 Watt / 8Ω bridge RMS. Weight: 12,5 Kg.
|
HPS 1500 is a 2 channel power amplifier that delivers up to 2 x 750 W RMS @ 4 Ω (1500 W RMS bridged @ 8 Ω).
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.
Features |
---|
Fast response and low distortion | Easy to configure in stereo / mono / bridge modes | Extensive protective circuits ensure high reliability and operating safety | Front panel signal / clip / protect LED indicators | Minimum load impedance (stereo / mono): 4 Ohm | XLR input connectors | SPEAKON output connectors | Switchable limiter |
2 unit 19" rack, low weight for easy transportation
AMPLIFIER SPECIFICATIONS |
---|
Power output stereo 4Ω: | 2 x 750 Watt rms | | Power output stereo 8Ω: | 2 x 450 Watt rms | | Power output bridged 8Ω: | 1500 Watt rms | | Frequency Response: | 20 Hz ÷ 20 kHz | | Signal/noise rate: | 106 dB | | Damping factor: | > 300 | | Slew rate: | 50 V/μS | |
INPUT SECTION |
---|
Input connector: | xlr | | Input sensitivity: | 1.4 V (/ 32 – 26 dB) dBm/V RMS | | Input impedance: | 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ | |
OUTPUT SECTION |
---|
Output connector: | Speakon | |
SYSTEM PARAMETERS |
---|
Cooling: | Forced | | Amplifier class: | H | |
POWER REQUIREMENT |
---|
Operating voltage: | 220 ÷ 240 V (50 / 60 Hz) V ~ Hz | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 88/3.4 mm/inch | | Width: | 482/18.9 mm/inch | | Depth: | 420/16.5 mm/inch | | Net Weight: | 17/37.4 Kg/Lbs |
|
|
Reviews
There are no reviews yet.