Content |
Specifications
General
Recording media CompactFlash card
Tested media SanDisk Extreme IV 4 GB, 8 GB, 16 GB
SanDisk Extreme 4 GB, 8 GB, 16 GB
File system FAT32
File format BWF (single-channel, multi-channel)
Number of audio channels 8 channels at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
8 channels + stereo mix at 44.1 kHZ, 48 kHz
4 channels at 176.4 kHz, 192 kHz
Quantization bit rates 16 bit/24 bit
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock Internal, Word in, Video in,
Digital in (CH 1-2, CH 3-4, CH 5-6, CH 7-8)
Timecode frame rates 23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic Omni directional, monaural
Low cut filter Cut-off frequency: 40/80/120 Hz
Slope: –12/–18 dB/oct
Analogue audio inputs and outputs
MIC IN/LINE IN connectors (1–8) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance (LINE) 10 kOhm
Nominal input level (LINE) + 6 dBu (Ref. level: –9 dB)
+ 4 dBu (Ref. level: Other than –9 dB)
Maximum input level (LINE) Selectable: +15 dBu, +18 dBu, +20 dBu, + 22 dBu, +24 dBu
Input impedance (MIC –25) 2.4 kOhm
Minimum input level (MIC –25) –45 dBu
Maximum iput level (MIC –25) +11 dBu
Input impedance (MIC 0) 2.4 kOhm
Minimum input level (MIC 0) –70 dBu
Maximum input level (MIC 0) –14 dBu
LINE OUT connectors (L/R) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance 100 Ohm or less
Nominal output level +6 dBu (Ref. level: –9 dB)
Nominal output level +4 dBu (Ref. level: Other than –9 dB)
Maximum output level Selectable: +15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu
PHONES connector 6.3-mm stereo phone jack
Maximum output power 100 mW + 100 mW or more (THD+N: 1 % or less, at 32 Ohm)
Digital audio inputs and outputs
DIGITAL I/O connector D-Sub, 25-pin connector
Format AES3-2003/IEC60958-4 (AES/EBU)
Minimum input voltage 200 mVpp
Maximum input voltage 7 Vpp
Output voltage 3.5 Vpp
DIGITAL OUT connectors BNC
Format AES3-2003/AES-3id-2001 (AES/EBU)
Output voltage 1 Vpp at 75 Ohm
Control inputs and outputs
EXT DC IN connector XLR-4-32 (1: –, 2: NC, 3: NC, 4: +)
Input voltage 11–16 V (2 A)
CASCADE/WORD/VIDEO IN connector BNC
Input voltage 5 V TTL equivalent
Input impedance 75 Ohm ±10 %
Allowable frequency deviation of external sync ±100 ppm
CASCADE/WORD OUT connector BNC
Output voltage 5 V TTL equivalent
Output impedance 75 Ohm ±10 %
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1 % pull-up/pull-down)
TIME CODE IN connector BNC
Input voltage 0.5–5 Vpp
Input impedance 10 kOhm
TIME CODE OUT connector BNC
Output voltage 2.0 Vpp
Output impedance 600 Ohm
USB port USB B-type, 4-pin
Format USB2.0 HIGH SPEED (480 MBit/s)
KEYBOARD connector Mini-DIN connector (PS/2)
Audio performance
Frequency response (MIC/LINE IN to LINE OUT)
All sample rates 20 Hz – 20 kHz, 0 dB (±0.5 dB)
88.2/96 kHz sample rates at 40 kHz –1 dB (±1.0 dB)
176.4/192 kHz sample rates at 80 kHz –3 dB (+1/–2 dB)
Distortion
LINE IN to LINE OUT 0.003 % or less (–20 dB reference level, +23 dBu input, 1 kHz, AES-17 LPF)
MIC IN (MIC –25) to LINE OUT 0.02 % or less (–20 dB reference level, –10 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
MIC IN (MIC 0) to LINE OUT 0.02 % or less (–20 dB reference level, –35 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
S/N ratio
LINE IN to LINE OUT 110 dB(A) or more (22 kHz LPF)
MIC IN (MIC –25 or MIC 0) to LINE OUT 100 dB(A) or more (22 kHz LPF)
Computer compatibility
Windows Windows XP, Windows Vista, Windows 7
CPU Pentium 300 MHz or faster
Memory 128 MB or more
USB USB 2.0 port
Macintosh Macintosh Mac OS X 10.2 or later
CPU Power PC G3, G4, Intel Mac 266 MHz or faster
Memory 64 MB or more
USB USB 2.0 port
Recommended USB host controller Intel chipset
Power supply and other specifications
Power requirements 100–240 V AC, 50–60 Hz (AC adaptor PS-1225L)
10 AA batteries (Alkaline or NiMH)
External DC battery (DC 11–16 V, 2 A or more)
Battery operation time (continuous operation) Measured according to JEITA standard at 48 kHz, 24-bit, 8 ch playback or recording, phantom power off. Varies with operating conditions.
NP type battery (Li-Ion: 14.8 V/4.6 Ah) About 5 hours
AA type batteries (NiMH) About 2 hours
Power consumption 18 W
Dimensions (W x H x D) 270 mm x 100 mm x 260 mm (excluding protrusions)
Weight 3.65 kg (excluding batteries)
Operating temperature range 0–40 ºC
|
RS-422 PROTOCOL CONVERTER
| Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording.
For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example.
Main Features
32-track digital Portastudio
8 mono tracks, 12 stereo tracks (can also be used as mono tracks)
Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution
Simultaneous playback of all 32 tracks
Virtual tracks for alternate takes and undo
Dedicated stereo master track
Colour LC display and 12-encoder channel strip for simple operation
Built-in 40-channel mixer
Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track
Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track
Dedicated controls for EQ, pan and effect sends
Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording
8 balanced microphone inputs on balanced combo XLR/jack connectors
Switchable phantom power for 4 channels each
One input switchable to instrument level for direct recording of a guitar or bass
Unbalanced stereo output (RCA jacks)
Balanced stereo monitor output (6.3-mm TRS jacks)
Two unbalanced effect sends (6.3-mm TS jacks)
Stereo headphones output (6.3-mm TRS jack)
MIDI input and output for MMC, Control Change and MTC output
Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory)
Input effects (Limiter, Compressor, Noise suppressor, Exciter)
Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter)
Mixdown effects (Reverb, Delay, Stereo chorus)
Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping)
Mark function (up to 99 location marks)
Built-in chromatic tuner and metronome
CD-RW drive for audio CD creation as well as file import and export
USB 2.0 port for data backup/restore and file transfer with a computer
Specifications
Recording media and file systems
Recording media SD card (512 MB to 2 GB)
SDHC card (4–32 GB)
File system SD card (512 MB to 2 GB): FAT16
SDHC card (4–32 GB): FAT32
Analogue audio inputs and outputs
MIC/LINE INPUTS A–H, XLR (balanced)
Connector XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kOhm
Nominal input level –14 dBu
Maximum input level +2 dBu
MIC/LINE INPUTS A–H, phone jack (balanced)
Connector 6.3-mm TRS phone jack
Input impedance >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR)
Nominal input level +4 dBu
Maximum input level +20 dBu
STEREO OUT L/R connectors RCA pin jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
EFFECT SENDS 1/2 connectors 6.3-mm TS phone jack
Nominal output level –10 dBV
Maximum output level +6 dBV
Output impedance 200 Ohm
MONITOR OUT L/R connectors 6.3-mm TRS phone jack
Nominal output level –2 dBu
Maximum output level +14 dBu
Output impedance 200 Ohm
PHONES connector 6.3-mm TRS phone jack
Maximum output power 70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load)
Other inputs and outputs
MIDI input (MIDI IN) DIN 5 pin
Format Standard MIDI format
MIDI output (MIDI OUT) DIN 5 pin
Format Standard MIDI format
USB connector USB 4-pin mini-B type
Format Mass Storage Class USB 2.0 High Speed
REMOTE connector 2.5-mm TRS jack
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Audio performance
Frequency response 20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Distortion ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
S/N ratio ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT)
Operating system requirements
Windows Pentium 300 MHz or faster
128 MB or more memory
Macintosh Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port USB 2.0
Recommended USB host controller Intel chipset
Supported operating systems Windows XP, Windows Vista, Windows 7
Mac OS X 10.2 or later
Power requirements and other specifications
Power supply AC adaptor (TASCAM PS-1225L)
Power consumption 12 W (Phantom power on)
Dimensions (Width x Height x Depth, excluding projections) 514 mm x 104 mm x 340 mm
Weight 6.2 kg
Operating temperature 5–35 °C
Design and specifications subject to change without notice. | Specifications:
- Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
- Recording format
• WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit
• BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
- Number of channels: 4-channel (stereo × 2, mono × 4)
- Analog audio input
• Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
• Input impedance: 2k ohms
• Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level: 0dBu
• Minimum input level: -72dBu
• MIC input gain: TRIM MAX
• LOW: +11dB
• HIGH: +51dB
• HI + PLUS: +63dB
• Input impedance: 10k ohms or more
• Standard input level: +4dBu
• Maximum input level: +20dBu
• Connector: 3.5mm(1/8“)stereo mini jack (this connector can be supplied plug-in power)
• Input impedance: 10k ohms
• Maximum input level: +10dBV
• Minimum input level: -50dBV
• MIC input gain: TRIM MAX
• LOW: +3dB
• HIGH: +26dB
• HI + PLUS: +38dB
• Connector: 3.5mm(1/8“)stereo mini jack
• Input impedance: 10k ohms
• Standard input level: -10dBV
• Maximum input level: +6dBV
Analog audio output
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -10dBV
• Maximum output level: +6dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -40dBV
• Maximum output level: -24dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Maximum output level: 20mW + 20mW
USB
• Connector: Micro-B type
• Format: USB2.0 HIGH SPEED mass storage class
- REMOTE Connector: 2.5mm TRS jack
- Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
- Power consumption: 5.0W
- Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
- Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
- Weight: 625g ( including batteries) / 530g (without batteries )
|
UR-80: 24 Bit/96 kHz USB Recording System
Features
- Over forty assignable controls
- Up to 24-bit/96KHz recording
- 2x XLR/TRS combo jack with qualified microphone preamp & phantom power
- Included HQ-GM2, HyperCanvas software synthesizer
- ASIO2.0/WDM, MacOS X compatible drivers, low-latency support.
- UR-80 Editor Software Included
- V-Link support
Knob8Fader9Rotary Encoder1Button25LED10Number of Memory SetsPreset1User7Number of Audio Record/Playback Channels (Full duplex (except for 96 kHz setting))Record2 channels (stereo)Playback2 channels (stereo)Signal ProcessingAD/DA Conversion24 bits (linear)PC interface24 bitsSampling Frequency24 bitsDigital output44.1/48/96 kHzDigital input32/44.1/48/96 kHz* Built-in realtime sample rate converterAD/DA Conversion44.1/48/96 kHzFrequency Response96.0 kHz20 Hz to 40 kHz (+0 dB/-2 dB)48.0 kHz20 Hz to 22 kHz (+0 dB/-2 dB)44.1 kHz20 Hz to 20 kHz (+0 dB/-2 dB)Nominal Input Level (variable)Input Jack 1, 2 (XLR type)-50 to -10 dBuInput Jack 1, 2 (1/4 inch TRS phone type)-35 to +4 dBuInput ImpedanceInput Jack 1, 2 (XLR type)5 k ohmsInput Jack 1, 2 (1/4 inch TRS phone type, Lo-Z)32 k ohmsInput Jack 2 (Hi-Z)1 M ohmsNominal Output LevelOutput Jack0 dBuOutput ImpedanceOutput Jack1 k ohmsHeadphones160 ohmsResidual Noise LevelOutput Jack-90 dBu or less
(input terminated with 1 k ohms, OUTPUT VOLUME: max., INPUT SENS = min., INPUT MONITOR = min., IHF-A, typ.)InterfaceUSB
Digital input/output Coaxial type
Optical type(conforms to S/P DIF)ConnectorsInput Jack 1, 2 (XLR type (phantom power)
1/4 inch TRS phone type)
Digital In Connectors (Coaxial type, Optical type)
Digital Out Connectors (Coaxial type, Optical type)
Headphones Jack (Stereo 1/4 inch phone type)
Output Jack L/R (RCA phone type)OthersPower SupplyAC adaptorCurrent Draw1000 mAAccessoriesInstallation Guide
Owner's Manual
USB cable
AC adaptor
CD-ROM
Overlay Sheets with Application LabelsSize and WeightWidth379 mm14-15/16 inchesDepth239 mm9-7/16 inchesHeight84 mm3-5/16 inchesWeight1.7 kg3 lbs. 11 oz.
|
Main Features
* Colour TFT touch screen interface
* 20 illuminated flash start keys
* Up to 100 tracks available for flash start through touch screen
* Transport and Online buttons recessed to prevent accidental operation
* 100-mm fader with fader start capability and 0-dB lock
* Monitor speaker and headphones output for monitoring
* CAT6 connection to HS-2 and HS-8
|
Reviews
There are no reviews yet.