TOA PJ-100W PROJECTION SPEAKER 10W 100V

78.51 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Nominal 10W Input Wide Range Projections Speaker. 65 ~ 15,000Hz Specification Input Power 10W Impedanc 50V line; 250 Ω (10W), 500 Ω (5W), 1k Ω (2.5W), 2k Ω (1.25W), 4k Ω (0.63W) / 70V line; 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W), 4k Ω (1.25W) / 100V line; 1k Ω (10W), 2k Ω […]

 

Read more

  • Nominal 10W Input
  • Wide Range Projections Speaker.
  • 65 ~ 15,000Hz
Specification
Input Power 10W
Impedanc 50V line; 250 Ω (10W), 500 Ω (5W), 1k Ω (2.5W), 2k Ω (1.25W), 4k Ω (0.63W) / 70V line; 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W), 4k Ω (1.25W) / 100V line; 1k Ω (10W), 2k Ω (5W), 4k Ω (2.5W)
Preset Impedanc 1k Ω
Sound Pressure Level (at 1kHz 92dB / W / M
Speaker Diameter 12cm
Frequency Response 65 ~ 15,000Hz
Dimensions ø140mm x 195mm
Weight 1.8kg
Cabinet ABS resin
Colour Off-white
Weight 1.80 kg

Reviews

There are no reviews yet.

Be the first to review “TOA PJ-100W PROJECTION SPEAKER 10W 100V”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA PJ-100W PROJECTION SPEAKER 10W 100V removeTOA BS-633A Wall mount speaker removeTOA BS-633AT Wall mount speaker removeTOA BS-5W Box Type Splash Proof Speaker (5W, 100V line) removeTOA BS-634 Wall-Mount Speaker 6W,5' removeTOA BS-678 Wall-Mount Speaker 6W,6' remove
NameTOA PJ-100W PROJECTION SPEAKER 10W 100V removeTOA BS-633A Wall mount speaker removeTOA BS-633AT Wall mount speaker removeTOA BS-5W Box Type Splash Proof Speaker (5W, 100V line) removeTOA BS-634 Wall-Mount Speaker 6W,5' removeTOA BS-678 Wall-Mount Speaker 6W,6' remove
Image
SKUPJ-100WBS-633ABS-633ATBS-5WBS-634BS-678
Rating
Price 78.51 incl. GR VAT 24.73 incl. GR VAT 32.53 incl. GR VAT 167.71 incl. GR VAT 53.85 incl. GR VAT 26.23 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Nominal 10W Input
  • Wide Range Projections Speaker.
  • 65 ~ 15,000Hz
Specification
Input Power 10W
Impedanc 50V line; 250 Ω (10W), 500 Ω (5W), 1k Ω (2.5W), 2k Ω (1.25W), 4k Ω (0.63W) / 70V line; 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W), 4k Ω (1.25W) / 100V line; 1k Ω (10W), 2k Ω (5W), 4k Ω (2.5W)
Preset Impedanc 1k Ω
Sound Pressure Level (at 1kHz 92dB / W / M
Speaker Diameter 12cm
Frequency Response 65 ~ 15,000Hz
Dimensions ø140mm x 195mm
Weight 1.8kg
Cabinet ABS resin
Colour Off-white

The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

SPECIFICATIONS
BS-633A  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W)
Sensitivity (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5" (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 780g (1.72 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2

 

The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

BS-33AT  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)
Sensitivity: (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5" (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Attenation Level: 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 810g (1.79 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2

 

  • For Shower Room / Pool.
  • Low Input BGM / FGM (in compliance with IP-X4).
  • Splashproof 360° Rotatable 5W Full-Range Sealed 10cm Speaker for Rainy or High Humidity Areas.
Specification
Type Sealed type
Speaker 10cm dynamic speaker
Rated Power 5W
Impedance 2k Ω (5W), 3.3k Ω (3W), 5k Ω (2W)
Output Sound Pressure Leve 90dB / W / M
Frequency Response 120 ~ 18,000Hz
Operating Temperature Range -20 ~ +55°C
Speaker Component 12cm dynamic cone type speaker
Finish Enclosure; Polypropylene, Grey / Grill; Aluminium, Grey.
Dimensions (W x H x D) 198 x 177 x 159mm
Weight 1.4kg

The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.

BS-634
Speaker Component: 5" (12cm) Cone-type
Impedance: 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W),
Sensitivity: (1w 1m) 90dB
Frequency Responce: 120 -20,000Hz
Input Terminal: Push-in terminal
Finish: Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable
Dimensions: 320(W)x200(H)x85(D)mm

 

The BS-678 is a double-cone type speaker with a wooden cabinet that has a stylish, compact and unobtrusive design and that delivers highly cost effective performance. A push-in type input connector allows easy cable connections and bridge wiring. The selectable input impedance can be easily adjusted by changing the tap position
of the unitʼs transformer. 6" (16cm) double cone speaker unit ensures high-quality sound, making the BS-678 ideal for BGM and announcement applications. It can be installed in either a horizontal or a vertical orientation. Its structure permits direct wall installation with screws, making the speaker unit resistant to falling even if outward force is applied to it.
• Stylish, compact and unobtrusive design
• Quick and easy installation
• High cost-effectiveness
• Horizontal / vertical installation
• Ideally suited for BGM and announcements

BS-678
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ(1.5W),13kΩ (0.8W) 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ(0.8W),13kΩ (0.4W)
Sensitivity (1W, 1m): 94dB (500 – 5,000Hz, pink noise)
Frequency Response: 150 – 20,000Hz (peak –20dB)
Speaker Component: 6" (16cm) double cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2(equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Finish: Baffle: HIPS resin, off-white (RAL 9010 or equivalent colour)
Cabinet: Particle board with pvc sheet, off-white(RAL 9010 or equivalent colour)
Grille: Surface-treated steel plate net, off-white(RAL 9010 or equivalent colour)
Dimensions: 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“)
Weight: 1.7kg (3.75 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" × 1.38“)) × 2

 

Weight1.80 kg0.78 kg0.81 kg1.40 kg1.00 kg1.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.80 kg
Weight 0.78 kg
Weight 0.81 kg
Weight 1.40 kg
Weight 1.00 kg
Weight 1.70 kg