Content |
The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.
(*1) 0 dB = 1 V Power Source | AC mains (supplied AC adapter must be used) | Power Consumption | 130 mA (12 V DC) | Receiving Frequency | 636 - 865 MHz(*2), UHF | Channel Selectable | 16 channels | Receiving System | Double super-heterodyne | Diversity System | Space diversity | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | Antenna | Rod antenna | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | Squelch Sensitivity | 18 - 40 dBμV variable | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | Tone Frequency | 32.768 kHz | Indicator | ANT A/B, Audio (peak), Battery alarm, Channel number | Channel Check | Usable frequencies scanning | S/N Ratio | 104 dB or more (A-weight, unbalanced output) | Harmonic Distortion | 1% or less (typical) | Frequency Response | 100 - 15,000 Hz, ±3 dB | Operating Temperature | -10℃ to +50℃ | Finish | Resin, black | Dimensions | 206 (W) × 40.6 (H) × 152.7 (D) mm (excluding antenna) | Weight | 590 g | Accessory | AC adapter(*3) …1 |
|
Wireless receiver module 6 frequencies for WA-1812, 1812C. Combined with WM-3210, 3220 hand, WM-3310 lapel, WM-3310H head |
The IR-500R Infrared Wireless Receiver is designed for use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or an electrical box.
Power Source | 24 V DC (supplied from the IR-702T) | Current Consumption | Max. 40 mA |
Infrared Detector
Wavelength | 870 nm | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Reception Angle | Vertical: 80゜ (up to 30゜ movable downward)
Horizontal: 80゜ (up to 30゜ movable left or right) | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | Connection Terminal | 75 Ω, BNC jack | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Filter section: Polycarbonate, optical cut filter
Base: ABS resin, off-white | Dimensions | 70 (W) × 120 (H) × 72 (D) mm (2.76" × 4.72" × 2.83“) | Weight | 220 g (0.49 lb) (unit only) |
| SLX4 - Wireless Receiver
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
SLX Wireless Systems feature Shure's patented Audio reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
- Automatic Frequency Selection
- Automatic Transmitter Setup
- 960 Selectable frequencies across 24 MHz bandwidth
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversity
- RF presence LED
- 5-segment audio meter
- Multi-function, backlit LCD
- Low battery indicator
- Frequency and power lockout
- Rugged metal chassis
- Volume control on rear of unit
- 1/2 rack design
- Furnished rack hardware
- Non-slip bumpers for use out of rack
- XLR and 1/4" outputs
|
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.
Power Source | 24 V DC (supplied from the IR-702T) | Current Consumption | Max. 30 mA |
Infrared Detector
Wavelength | 870 nm | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | Connection Terminal | 75 Ω, BNC jack | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Filter section: Polycarbonate, optical cut filter | Dimensions | 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“) | Weight | 100 g (0.22 lb) (unit only) | Accessory | Stand mounting bracket …1, Bracket mounting screw …2 |
| Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync function.
Works with QLX-D™ Digital Wireless Systems
Features Ethernet networking and mobile monitoring and control capabilities
Includes QLXD4, hardware for rack-mounting, power supply, two 1/2 wave antennas, 2 BNC cables, 2 BNC bulkhead Adapters, and user guide
With transparent 24-bit digital audio quality and incredibly efficient RF spectrum usage, the QLXD4 Digital Wireless Receiver combines professional features with streamlined setup and operation.
Automatic scanning quickly finds open frequencies, and one-touch IR sync quickly deploys them to transmitters.
Ethernet networking enables networked channel scanning across multiple receivers and Wireless Workbench® software integration for remote control of receiver settings from a PC or Mac. Remote monitoring and control from iOS devices also is available via the ShurePlus™ Channels Mobile App.
Features
64 MHz tuning bandwidth (region dependent)
More than 60 preset compatible channels per frequency band (region dependent)
Up to 17 compatible systems per 6 MHz TV channel; 22 systems per 8 MHz channel
Digital predictive switching diversity ensures solid RF connection
AES 256-bit encryption for secure wireless transmission
Up to 60 dB of adjustable audio gain
High-contrast LCD menu and controls with lockout feature
Audio and RF LED meters with peak indicator
Detachable ½ wave antennas
Mic / line switchable XLR output
¼" Instrument output
Durable aluminum construction with brushed finish |
Reviews
There are no reviews yet.