| Content |
The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 130 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 16 channels | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna | Rod antenna | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | ANT A/B, Audio (peak), Battery alarm, Channel number | | Channel Check | Usable frequencies scanning | | S/N Ratio | 104 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1% or less (typical) | | Frequency Response | 100 - 15,000 Hz, ±3 dB | | Operating Temperature | -10℃ to +50℃ | | Finish | Resin, black | | Dimensions | 206 (W) × 40.6 (H) × 152.7 (D) mm (excluding antenna) | | Weight | 590 g | | Accessory | AC adapter(*3) …1 |
|
ER-1193
1 channel 193 Freq. PLL Receiver 822-846 MHz
2 Frequencies available:
790 - 814 MHz (Germany)
822 - 846 MHz
• 193 selectable UHF Frequencies.
• Available for 1 transmitter
• True diversity technology permits minimum dropouts in the RF link
• PLL synthesised technology for
multi-channels.
• Compact half-rack metal housing for
space saving
• "Lock-on" mode avoids accidental modification of frequency, sensitivity and power-off.
Frequency Preparation: PLL Synthesised Control
Carrier Freq. range: 600 MHz- 960 MHz
Frequency Stability: ±0.005%
S/N Ratio: >100 dB
Display: LCD
Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge
Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level
Audio Output Level: -12 dB
AF Output Impedance: 600 Ohm
Squelch: Pilot Tone & Noise Mute
Operation Voltage: 12-18 VDC, 500 mA
Output Connector: XRL Balanced/ 6,3 mm Unbalanced
Dimension: 211 x 152 x 40 mm (LxWxH) | SLX4 - Wireless Receiver
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
SLX Wireless Systems feature Shure's patented Audio reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
- Automatic Frequency Selection
- Automatic Transmitter Setup
- 960 Selectable frequencies across 24 MHz bandwidth
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversity
- RF presence LED
- 5-segment audio meter
- Multi-function, backlit LCD
- Low battery indicator
- Frequency and power lockout
- Rugged metal chassis
- Volume control on rear of unit
- 1/2 rack design
- Furnished rack hardware
- Non-slip bumpers for use out of rack
- XLR and 1/4" outputs
|
With LDs' WS100-X it is simple to use at least 8 systems simultaneously without interferences. All systems transmit in the frequency range of 838 to 865 MHz. According to the order 91/2005 of the German federal network agency, these frequencies have been approved for professional uses �" without additional charges or a registration in Germany. Otherwise the systems are identical to the common WS100 systems working at a frequency range of 790,850 MHz. - 813,800 MHz. For the use of more than 4 systems we always recommend our WS100AD antenna splitter and our WS100DA directional antennas.
- 160-channel true diversity receiver with detachable antennas
- Blue LCD display with RF and AF level, group, channel and frequency display
- Convenient channel setting and setup with infrared ASC system
- True diversity display
- Professional outputs (balanced XLR connector and unbalanced jack socket)
- Noise suppression (Squelch) control on the back
- Jack/jack cable included
- Optional 19" rack mount with antenna cable and socket connectors available (LD WS 100 RK)
- Optional 19" quadruple antenna divider (LD WS 100 AD) and antenna amplifier (LD WS 100 AB) available
Technical Specifications:
LDWS100RX:
| Frequency Range: | 838 - 865 MHz | | Switching bandwith: | 0.250 MHz | | No. of channels: | 160 (10 groups of 16 CHN) | | Sensitivity: | -93 dBm for 30 dB SINAD, typical | | Image Rejection: | >60 dB | | S/N Ratio: | >90dB | | T.H.D: | 90dB A-weighted | | Dimensions: | 45 mm H, 212 mm L,160 mm D | | Weight: | 920 grams | | Power Requirements: | 12-18 V dc at 300 mA, supplied by external power supply |
|
THE PROFESSIONAL 19" SOLUTION!
The WS100R2 Double Receiver has the same features and technical parameters like the WS100R Receiver. The 19'' size and the possibility for front mounting antennas, saves the rackmount kit and rack space. Inclusive two TNC antenna cables.
|
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.
| Power Source | 24 V DC (supplied from the IR-702T) | | Current Consumption | Max. 30 mA |
Infrared Detector
| Wavelength | 870 nm | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Reception Area | Approx. 15 m (50 ft) in a space without any obstacles | | Connection Terminal | 75 Ω, BNC jack | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Filter section: Polycarbonate, optical cut filter | | Dimensions | 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“) | | Weight | 100 g (0.22 lb) (unit only) | | Accessory | Stand mounting bracket …1, Bracket mounting screw …2 |
|
Reviews
There are no reviews yet.