| Content |
The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 130 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 16 channels | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna | Rod antenna | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | ANT A/B, Audio (peak), Battery alarm, Channel number | | Channel Check | Usable frequencies scanning | | S/N Ratio | 104 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1% or less (typical) | | Frequency Response | 100 - 15,000 Hz, ±3 dB | | Operating Temperature | -10℃ to +50℃ | | Finish | Resin, black | | Dimensions | 206 (W) × 40.6 (H) × 152.7 (D) mm (excluding antenna) | | Weight | 590 g | | Accessory | AC adapter(*3) …1 |
|
General Description
The most-trusted wireless monitoring system gets even better. With upgraded features, this bodypack receiver sets the standard by which all other monitoring systems will be judged. For example, the compact receiver features adaptive diversity for super-reliable reception. The headphone cable is utilized as a second antenna to banish audio dropouts. Operating the EK 300 IEM G3 is also easy due to its intuitive menu navigation and highly-visible backlit graphic display. A switchable Hi Boost and a multi-level limiter complete the package. After the performance, the entire bodypack receiver can simply be placed in an optional charging station to charge the optional rechargeable battery.
Features- Sturdy metal housing
- 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
- Enhanced frequency bank system with up to 16 compatible frequencies
- Adaptive diversity for high reception quality
- Pilot tone squelch for eliminating RF interference when transmitter is turned off
- Automatic frequency scan feature searches for available frequencies
- Enhanced AF frequency range
- Wireless synchronization of receiver parameter from transmitter
- User-friendly menu operation with more control options
- Illuminated graphic display
- Auto-Lock function avoids accidental changing of settings
- HDX compander for crystal-clear sound
- Receiver features battery indicatation in 4 steps
- HiBoost, adjustable limiter, stereo/focus mode, balance
- Contacts for recharging BA 2015 accupack directly in the receiver
- Wide range of accessories adapts the system to any requirement
Delivery Includes- 1 EK 300 IEM G3 diversity receiver
- 1 IE 4 earphones
- 2 AA-size batteries
- 1 user manual
|
Designed for on-camera mounting, the FP5 Portable Receiver locates an open frequency at the touch of a button and instantly syncs the transmitter to the receiver frequency.
The battery-powered FP5 is lightweight and durable, featuring diversity antennas and output to either XLR or 1/8" connectors.
For use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Power LED with low battery indicator
RF LED that indicates transmitter sync when illuminated
Receiver output level control that manages output to camera/mixer
Diversity antennas for consistent reception of signal transmission
TA3F cable output to either XLR or 1/8" connectors included
Camera shoe mount included
Rugged and lightweight Shure construction
Audio Output Type
TA3F
Configuration
Impedance balanced
Pin Assignments
1=ground, 2=hot, 3=cold
Maximum Audio Output Level (Ref. ±38 kHz deviation with 1 kHz tone)
–5 dBV (into 600 Ω load)
Impedance
200 Ω
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
81 g (3 oz.)
Housing
Molded polycarbonate case
Sensitivity
–108 dBm for 12 dB SINAD, typical
Power Requirements
LR6 AA batteries, 1.5 V
Battery Life
Up to 12 hours (alkaline)
Bandwidth
24 MHz
Compatible Systems
Up to 20, simultaneous
|
Info
Digital microphone 4 channel receiver.
|
Wireless receiver module 6 frequencies for WA-1812, 1812C. Combined with WM-3210, 3220 hand, WM-3310 lapel, WM-3310H head |
The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.
(*1) 0 dB = 1 V | Power Source | AC mains (supplied AC adapter must be used) | | Power Consumption | 250 mA (12 V DC) | | Receiving Frequency | 636 - 865 MHz(*2), UHF | | Channel Selectable | 64 selectable frequencies | | Receiving System | Double super-heterodyne | | Diversity System | Space diversity (true diversity) | | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | | Antenna Output | 75 Ω, BNC (Gain 0 dB) | | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | | Squelch Sensitivity | 18 - 40 dBμV variable | | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | | Tone Frequency | 32.768 kHz | | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | | Channel Check | Usable frequencies scanning | | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | | Harmonic Distortion | 1 % or less (typical) | | Frequency Response | 100 Hz - 15 kHz, ±3 dB | | Operating Temperature | -10 ℃ to +50 ℃ | | Finish | Resin, black | | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | | Weight | 700 g | | Accessory | AC adapter(*3) …1, Wireless antenna …2 | | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units) |
|
Reviews
There are no reviews yet.