Content | WIRELESS MICROPHONE WM-3000A
- TRANSMIT FREQUENCY: 322.025MHz~322.150MHz、322.250MHz~322.400MHz
(13 channels at 25kHz intervals)
- RADIO WAVE STYLE: 30KF3E
- OSCILLATION STYLE: Oscillation control PLL synthesizer
- MODULATION STYLE: Reactance modulation
- TRASMIT BANDWITH:Within 30kHz
- FREQUENCY STABILITY: Within ±10ppm
- TRASMIT OUTPUT:1mW
- ANTENNA: Built-in antenna
- MODULATION SENSITIVITY: ±2.25kHzFM (94dB SPL at 1kHz)
- MAXIMUM FREQUENCY SHIFT: ±8kHzFM
- MICROPHONE: Unidirectional electret condenser microphone
- FREQUENCY RESPONSE: 100Hz ~ 7kHz (at 1kHz basis, 50μs emphasis)
- MAXIMUM INPUT SPL: 120dB SPL
- INPUT EQUIVALENT NOISE:36dB SPL or less (A curve)
- BATTERY: Dry cell battery R6P(AA size) x1 pce
- CURRENT CONSUMPTION: 45mA (at normal temperature, 1.5V)
- BATTERY LIFE: Approx. 14 hours (at normal temperature)
- TEMPERATURE RANGE: 0°C~+40°C
- FINISH: (ABS resin): Stone silver (Munsell N4.5 approx.)
- DIMENSIONS: φ54 x 230 (L) mm
- MASS:Approx. 180g (with battery)
|
The FP1 Bodypack Transmitter features a lightweight and durable design for use with TA4F-connection microphones including lavaliers and headsets.
Ideal for use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Automatic transmitter setup that instantly syncs the transmitter to the receiver frequency
LED indicator for control lockout, IR RF sync, and low battery
Audio input gain for adjustment of audio level
4-Pin microphone input jack for use with lavaliers or headset microphones with TA4F connectors
Gain Adjustment Range
−10 to +20 dBV
Input Impedance
1 MΩ
RF Output Power
10 to 30 mW (varies by region)
Pin Assignments
TA4M
1: ground (cable shield)
2: + 5 V Bias
3: audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
81 g (3 oz.), without batteries
Housing
Molded polycarbonate case
Power Requirements
2 AA batteries, 1.5 V
Battery Life
Up to 12 hours (alkaline)
|
Shure SLX2-BETA87C-R5 Wireless Microphone
Features:
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Operating Range Under Typical Conditions
100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and
interference
Audio Frequency Response (+/? 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)
0.5%, typical
Dynamic Range
>100 dB A-weighted
Operating Temperature Range
?18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied
to tip of WA302 phone plug) produces positive voltage on pin 2 (with
respect to pin 3 of low impedance output) and the tip of the high
impedance 1/4-inch output.
SLX1 Bodypack Transmitter
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX4 Receiver
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): ?13 dBV
1/4 inch connector (into 3000 Ω load): ?2 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
?105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12?18 Vdc at 150 mA, supplied by external power supply
|
EB-193
Wireless PLL Beltpack Transmitter 193 freq 822-846 MHz
• PLL synthesised 193 switchable
frequencies.
• Operation in the UHF range
• Compatible for lavalier or headset
microphones
• Powered by AA batteries
• Equipped with 4P mini XLR connector
• LCD
Frequency Preparation: PL Synthesized Control
Carrier Frequency Range: 600-960 MHz
RF Output: 10 mW
Stability: ±0.005%
Frequency Deviation: ±48 kHz
LCD Display: Frequency, battery
fuel gauge
Controls: Power On/Off, AF level,
Frequency Up/Down, Lock-on mode
Spurious Rejection:
Audio Freq. response: 50 Hz - 16 kHz
Battery: UM3, AA 1.5V x 2 |
Bodypack transmitter with rugged aluminium body
30 MHz wide UHF band, up to 1200 selectable frequencies
Backlit display and jog switch for ease of use
Up to 50 mW RF output for maximum immunity to interference and dropouts
Optional remote mute switch
Operates for up to 15 hours on AA size dry batteries, 12 hours on optional BP 4000 battery pack with integrated Smart Battery Management System
Charging contacts for easy battery charging on optional charger
-Theater, onstage miking
-Conferencing
-Houses of worship
-Live sound
-Sound/AV company
Carrier frequency range 500 to 530, 570 to 600, 650 to 680, 680 to 710, 720 to 750, 760 to 790, 790 to 820, 835 to 863 MHz
Audio bandwidth 35 to 20,000 Hz
THD 120 dB(A) typical
Modulation FM
RF radiation max. 50 mW (ERP)
Battery life 2 AA size dry batteries: 15 hours typ.; BP 4000 rechargeable battery pack: 12 hours typ.
Dimensions 70 x 90 x 25 mm (2.8 x 3.5 x 1 in.)
Net weight 95 g (3.4 oz.)
|
UHF-R handheld transmitters boast a rugged, lightweight construction and an antenna design which advances RF transmission reliability. The transmitter design allows for interchangeable microphone cartridges. The UR2 is offered with BETA 87A, BETA 87C, BETA 58A, SM86, SM87A, SM58, KSM9 and VP68. For use with UHF-R Wireless Systems. UHF-R Wireless features KSM9 as the premier choice in handheld vocal microphones. Switchable RF power Frequency and power lockout Bit-mapped backlit LCD 2 AA batteries -- up to 9.5 hours continuous use Infrared automatic transmitter sync All metal die-cast construction Interchangeable cartridges: SM58, SM86, SM87A, Beta 58A, Beta 87A, Beta 87C, KSM9, and VP68
|
Reviews
There are no reviews yet.