Vox DA15 15W Guitar Amplifier

Vox DA15 15W Guitar Amplifier

Introducing the affordable, portable DA15 Digital Amp from VOX. Don't let the small size fool you. This rugged little beast boasts some killer bells and whistles, ­ such as 11 distinctive sound styles ranging from clean to high gain, 11 great sounding, digital effects, a ???knob-based?? control panel that's really easy to use plus a whole lot more.

Specifications:

Number of Styles: 11
Number of Effects: 11 plus noise reduction
Signal Processing: 24-bit (both A/D and D/A conversion), 44.1 kHz sampling frequency
Input/Output Jacks: INPUT, FOOT SW, LINE/PHONE
Power Amp Output: Maximum 15W RMS @ 8 ohms
Speaker: 1 x 8 inch, VOX original (8 ohm)
Power Supply: Local Mains
Dimensions: 16.81?? x 8.90?? x 15.24?? (W x D x H)
Weight: 22.05 lbs
Options: VFS2 Dual Foot Switch

• Hand-built and hand-wired 120-Watt Class A/B amplifier driven by 4 x 6L6 tubes (now fully compatible with EL34 and 5881, etc.)
  
• 2 original 12" BUGERA guitar speakers optimized for tight low-end and modern-vintage mids
  
• Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 valves for boutique clean and face-melting hi-gain tone
  
• Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
  
• Revolutionary INFINIUM Tube Life Multiplier technology:
  
  • Extends the life of your amplifierʼs expensive power valves up to 20 times.
    
  • Provides incredible reliability and consistent tone over the complete lifespan of your valves
    
  • No need for expensive matched valve sets
    
  • Allows you to mix and match any combination of compatible valve types and brands
    
  • Monitors performance of each power tube continuously and displays defective valves to allow for easy and individual replacement

• Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
  
• Power amp damping switchable (High, Medium, Low) for total sound control
  
• Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
  
• Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
  
• Line output with dedicated Level control
  
• Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  
• High-quality components and exceptionally rugged constructionensure long life

Product Description

MG101CFX is a Carbon Fiber outfitted, 100 Watt 1x12 inch guitar combo amplifier with FX!

Features

- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 1x12 in. Speaker combo
- 100 watts

• 30-watt, 2x12" combo guitar amplifier
  
• Two channels with independent volume controls — Normal and Top Boost
  
• Reverb and Tremolo effects onboard (controllable via optional footswitch)
  
• Master volume section with Tone Cut and Volume controls
  
• True bypass effects loop for bringing in your own pedals
  
• Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
  
• 16-ohm output jack for running a cabinet along with the internal speakers
  
• Features two 12" 8-ohm Celestion Alnico Blue speakers
  
• Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
  
• Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
  
• Weight: 73.59 lbs.

From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:

100W power
All-valve, with 5 x ECC83s, and 4 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes (clean,crunch & overdrive)
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England