Content | ESD 5K Automatic Voltage Regulator
Automatic tension regulator. For a tension between 120 V. and 250 V. Maintains the output to 220 V.
Max. load 5.000 W. Input and output connections through bananas. Schuko base output auxiliar regulated.
(max. 2.500 W.). Digital display with information of the input tension, output tension, current and protection.
The protection works by overload or an excesive temperature emitting a sound of advise and disconnecting
the load. It has in its rear panel an auxiliar shuko plug.
Dimensions: 230 x 220 x 370 mm. Weight: 16, 3 kgs. |
These power distributors are cost-optimised powerhouses. Designed for everyday stage use, they provide a basic supply of conventional electricity requirements. The components have been selected based upon their fulfilment of the relevant safety requirements and a favourable price/performance ratio.
- 3 x indicator lamps for phase control L1, L2, L3
- Input via 32 A CEE panel mounted receptacles 5-pin red
- Output parallel to input 32 A CEE socket 5-pin red
- Protection via 3 x C16 circuit breakers
- Front output via 3 x panel mounted receptacles with hinged lids grey
- Rear output via 6 x panel mounted receptacles with hinged lids grey
- Quality Made in Germany
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
9 (3 x front, 3 x 2 rear)
Power input
32 A CEE 5-pole panel socket, red
Output parallel to input
32 A CEE 5-pole panel plug, red
Fuse
3 x C16 circuit breaker (C tripping characteristic : for higher switch-on power)
Other features
indicator lamp pro phase
|
This is a 32 A three-phase power splitter with 3x 32A/400V input and 6 Schuko 16A/250V output.
Each Schuko is protected by a 16A circuit breaker and each phase can be read out by a 4-digit
voltmeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is used for
protection against electronic shock under fault conditions. Also, a CEE-socket is provided for plugging
in power.
| BreakoutBar 4
Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out
Powersplitter from CEE 16A 5 pole three phase to 6 schuko outputs (2 per phase). Also equipped with a CEE 16A 5 pole three phase for linking multiple splitters together.
Compact design. Sliding profile for easy mounting of clamps and safety-eyes. |
Zero88 Rack 6-Schuko 6 Channels Digital Switcher
Cost effective 19" dimmer
The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.
The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.
With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.
The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.
Features |
- 3 dimmer curves (normal, linear, switch)
- 12 Memories
- Preheat per channel
- International socket options
- 6 x 10 Amps
- MCB per channel
- Advanced heatsink and fan cooling
- DMX addressing via user interface
|
- 19"
- Built in termination circuit for DMX
- ChilliNet enabled
- RDM hardware ready
- Dimensions - 88mm x 483mm x 360mm
- Weight - 8.0kg
| |
Zero88 Switch 6 Socapex DMX 6 Channels Digital Switcher
Cost effective 19" dimmer
The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.
The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.
With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.
The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.
Features |
- 3 dimmer curves (normal, linear, switch)
- 12 Memories
- Preheat per channel
- International socket options
- 6 x 10 Amps
- MCB per channel
- Advanced heatsink and fan cooling
- DMX addressing via user interface
|
- 19"
- Built in termination circuit for DMX
- ChilliNet enabled
- RDM hardware ready
- Dimensions - 88mm x 483mm x 360mm
- Weight - 8.0kg
| |
Reviews
There are no reviews yet.