Content |
This is a 63A three-phase power splitter with 3x 63A/400V input and 4 CEE 3x 32A/400V output.
Each output is protected by a 32A multi9 circuit breaker and each phase can be read out by a
4-digit voltimeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is
used for protection against electronic shock under fault conditions. |
Eurolite Board 10-ST w/10x safety-plug
10-fold switching panel Fully cabled case with 10 safety-sockets For 16 A safety-plug 10 switches with flash-buttons 10 fuseholders with 5 A
Power supply: 230 V AC, 50 Hz ~ Max. power output: 3680 W Max. current: 16 A Max. current/channel: 5 A Output sockets: 10 safety power outlets Fuses: F 6.3 A, 250 V Dimensions (LxWxH): 135 x 485 x 135 mm Weight: 3.3 kg | Technical Drawing - 87470 [107,0 KB]
|
|
| - Professional compact mains distribution unit with four Schuko mains.
- Built in a stable aluminium housing
- 30 cm length (not 19“)
- The wider distance between the outlets allows using power adaptors side by side.
- Four possible mounting positions because of replaceable mounting clips.
- For mounting e.g. on the back wall or sidewalls inside of racks or on any other surface with screws (not included).
- Length of cable: 2 m
- Cross section of the inner conducters: 3 x 1,5mm²
- 16 A / 250V AC
|
|
Work LP-12S Controller
12 channels driver of 1.000 W. by channel with total load 6.000 W. Dimensions: 483 x 44 x 23 mm. Weight: 1,2 kgs. |
Powersplitter 16
Powersplit with fuse
Power input: 380V, 16 Ampere Input connector: 5 pole 16 Ampere CEE Power output: 6 x 230V, 16 Ampere Output connector: Schuko Fuses: 3 * C-16 Dimensions: 403 x 165 x 127 mm (LxWxH) Weight: 3,4 kg | Eurolite SB-1100 Practical 32 A distributor in 19" housing
Practical 32 A distributor in 19" housing
Specially designed for larger distribution needs
3 U necessary for installation
32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug
32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker
The entire distributor is secured via 30 mA fault current circuit breaker
2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks
Control lamps indicate each phase
6 safety sockets on the housing back (2 per phase)
Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers
With earthing screw in order to ground a rigg if necessary
Power supply: 380-400 V AC, 50 Hz ~
Max. output/channel (safety socket): 3680 W
Max. current/channel (safety socket): 16 A
Max. output/phase: 7360 W
Max. current/phase: 32 A
Height: 3 U
Dimensions (LxWxH): 482 x 295 x 132 mm
Weight: 6.9 kg |
Reviews
There are no reviews yet.