| Content |
This is a 63A three-phase power splitter with 3x 63A/400V input and 4 CEE 3x 32A/400V output.
Each output is protected by a 32A multi9 circuit breaker and each phase can be read out by a
4-digit voltimeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is
used for protection against electronic shock under fault conditions. | 19" Power Strip 1 U with 3 separate Power Circuits
- Safety outlets each with 16 A / 250 V
- Outlets of power circuit one are ruby red
- Power circuit two is light grey and three is black
- 2-m cable with red CEE plug 16 A pro phase / 400 V
- cable on the side
- 19" brackets can be mounted in for different positions
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
6 (3 x 2) , Rotated 45°
Power input
cables
Cable length
2 m
Cable connector
16 A CEE plug 400 V
Cross section
5 x 1.5 mm²
Operating voltage
400 V
Max. current
3 x 16 A
Cabinet material
Aluminium
Colour
Black
Width
485 mm
Height
44 mm
Depth
44 mm
Other features
3 phases colour-coded (red, grey, black) , Mounting brackets can be used in 4 positions
Weight
1,12 kg |
Work LS-12 Controller
12 switches panel (0-10 V.) adaptable to model LP-12 S
Dimensions: 483 x 44 x 16 mm. Weight: 1,2 kgs. | Adam Hall Cables 87471
19" Power Strip 1U 8-way with switch
Mains Distribution Unit 19"/1 U
- Illuminated 2-pole switch on the front panel
- 8 mains outlets on the rear panel
- Black aluminium housing
- 54 mm deep
- 19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
|
Zero88 Rack 6-Schuko 6 Channels Digital Switcher
Cost effective 19" dimmer
The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.
The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.
With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.
The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.
| Features |
- 3 dimmer curves (normal, linear, switch)
- 12 Memories
- Preheat per channel
- International socket options
- 6 x 10 Amps
- MCB per channel
- Advanced heatsink and fan cooling
- DMX addressing via user interface
|
- 19"
- Built in termination circuit for DMX
- ChilliNet enabled
- RDM hardware ready
- Dimensions - 88mm x 483mm x 360mm
- Weight - 8.0kg
| | Technical Drawing - 87470 [107,0 KB]
|
|
| - Professional compact mains distribution unit with four Schuko mains.
- Built in a stable aluminium housing
- 30 cm length (not 19“)
- The wider distance between the outlets allows using power adaptors side by side.
- Four possible mounting positions because of replaceable mounting clips.
- For mounting e.g. on the back wall or sidewalls inside of racks or on any other surface with screws (not included).
- Length of cable: 2 m
- Cross section of the inner conducters: 3 x 1,5mm²
- 16 A / 250V AC
|
|
Reviews
There are no reviews yet.