| Description | | | The SUB 8003-AS II active subwoofer features the latest generation of RCF woofer technology, digital amplifiers and DSP processing with higher power and enhanced performance. It offers the perfect blend of bass reproduction, high SPL and compact dimensions for mobile use by bands and DJs. | | |
The black SUB 8004-AS Professional Series Active Subwoofer from RCF features a high-power, hypervented 18" woofer with 4" inside/outside voice coils designed to deliver a serious amount of low frequency. Powered by a 2500W digital amplifier module, the SUB 8004-AS can perform in the most demanding situations. The input board includes volume control, deep/punch switch, high-pass switch, phase switch, cardioid, and time delay.
The sub is stackable and lightweight for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the sub in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducer from dust.
RCF's Class-D power amplifier technology packs huge performance, operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultrafast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure, which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight.
RCF developed advanced transducer technology including the application of high-tech materials such as neodymium, carbon fiber, pure titanium, kevlar, kapton, and mylar hybrids. RCF has been instrumental in technological inventions such as carbon fiber cone molding, double silicon spiders, inside/outside voice coil windings to edge wound voice coil manufacturing and pure titanium diaphragm forming.
RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self-powered design, internal delay control, cardioid configuration options and impressive size/weight to SPL output ratio.
The RCF cabinets are made of baltic birch plywood coated with a textured black finish. The subs are stackable and lightweight, for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.
Live sound, rental, portable PA, clubs, ballrooms, live theatres, houses of worship, theme parks, music playback, and sound reinforcement in small- and mid-size venues, and corporate A/V professionals and sound system hire companies
|
| Content |
The DSR118W is a compact and high power active subwoofer system that extends the bass of the DSR full range speaker system to below 40Hz. With a high efficiency, low distortion 800W Class-D amplifier and a long travel, cast frame 18" woofer, the DSR118W achieves maximum peak SPL of 132dB. It also features a 35mm pole socket on the top, making it easy to set up a high performance sub/mid-high system.
- All-new 800W Class-D amplifier with PFC switching mode power supply
- Maximum SPL 132dB peak
- Extensive protection of the transducers, amplifiers and power supply
- Premium-grade, custom designed transducers
- Low-frequency extension down to 40Hz
- Compact and lightweight (42kg/ 93lbs)
- Bass-reflex, direct-radiating design
- Top panel pole mount for satelite configuration
- Heavy-duty 16-gauge (1.6mm) steel grille
- Locking IEC cable
General specifications | Speaker type | 18" Powered Subwoofer, Bass-reflex Type | | Frequency range (-10dB) | 40Hz ~ 130Hz | | Frequency response (-3dB) | 50Hz ~ 110Hz | | Components | LF | 18" cone | | Output power | 800W | | Maximum output level (1m; on axis) | 132dB SPL | | I/O connectors | INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT | | Power consumption | 100W | | Pole socket | 35mm (Bottom Board) | | Dimensions | W | 520mm (20 4/8“) | | H | 638mm (25 2/8“) | | D | 584mm (23“) | | Net weight | 42.0kg (93lbs) | |
The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.
The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.
The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.
Full specifications
Net Weight 45kg (99lbs)
Dimensions 500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components 1 x 18" (457mm) LF driver
Frequency Response 36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL 125dB continuous, 131dB peak
Construction 18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware M10 rigging points on top and bottom
Spares & Accessories LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module
|
- 2200 W
- 135 dB max SPL
- 35 Hz - 120 Hz frequency response
- 18" Woofer, 4.0" v.c.
- Total Power: 2200 W Peak, 1100 W RMS
- Selectable gain, X-over and delay
- Birch tour grade cabinet
- Stereo XLR input, Stereo XLR signal output
| The JBL EON718S 18-inch subwoofer is part of JBL’s new EON700 Series of powered PAs, which represents a major step forward in innovation and technology by delivering truly intelligible, clearly consistent coverage at any volume level.
Features
Custom-engineered 18-inch woofer
Power: 1,500W peak / 750W RMS
Frequency response: 31?150 Hz (-10 dB); 40?120 Hz (-3 dB)
Max SPL: 131 dB
Audio I/Os: 2 XLR Combo, 2 XLR loop-outs
Advanced dbx DSP: Parametric EQ, polarity inversion, speaker delay
Built-in 2-channel digital mixer
Parametric EQ, polarity inversion and speaker delay
Color backlit LCD screen provides easy access to functions
Durable birch plywood cabinet with patented DuraFlex finish and metal grille
Universal JBL Pro Connect app control using powerful BLE technology
Ergonomic handles simplify transport
Built-in threaded pole mount expands system configuration options
Stackable cabinets simplify cardioid configurations and equipment storage
Dimensions: 26.3 x 24 x 25.1 in (667 x 609 x 637mm) (HxWxD)
Weight: 81.5 pounds (37 kg)
Shipping dimensions: 29.6 x 28.42 x 29.3 x (744 x 722 x 752 mm) (HxWxD)
Shipping weight: 94.4 pounds (42.8 kg)
7 years warranty is included. |
Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite
Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.
- Application: Subwoofer
- Output Power: 600 Watt
- Built-in stereo X-over
- Very punchy High-power Subwoofer for Bands and DJʼs
| Model | PR:O 18 Sub A | | Title | PREMIUM PR:O | | Product Class | Active Systems | | Frequency response +/- 3 dB | 48 Hz – Xover | | Frequency response -10 dB | 38 Hz – Xover | | Maximum SPL, @ 10% THD | 125 dB | | Connections | 2x XLR Kombi Line In balanced,2x XLR L/R Out Mid/High,2x XLR Through balanced | | LF Speaker | 1x18“ | | X-Over | 75 Hz – 150 HZ, switchable | | Subsonic filter | 35 Hz | | Peak limiter | yes | | RMS-Soundlimiter | no | | Amplifier | 600 W Class D – 4 ohms | | Pole mount | M20 threaded base plate | | Handles | 2, integrated | | Enclosure | MDF | | Grille | metal grille with acoustic foam | | Finish | acrylic painture, black | | Dimensions (WxHxD) | 53 cm x 61 cm x 64 cm | | Weight | 39,8kg / 87.8 lbs. |
|
| Configuration |
Active Subwoofer |
| Enclosure Type |
Subwoofer |
| Total Power Capacity |
2500 W Peak
1250 W RMS |
| Amplifier Class |
Class-D |
| HF Driver |
None |
| MF Driver |
None |
| LF Driver |
1 x 18" / 45.7 cm Woofer |
| LF Voice Coil |
Dual 4" / 10.2 cm
|
| Frequency Response |
30 Hz to 120 Hz |
| Maximum SPL |
136 dB |
| Input Sensitivity |
-2 dBu (Min)
4 dBu (Max) |
| Protections |
RMS, Thermal |
| Audio I/O |
1 x XLR 3-Pin Female Balanced Line Input
1 x XLR 3-Pin Male Balanced Line Output |
| Network I/O |
None |
| USB |
None |
| Wireless Connectivity |
None |
| EQ |
None |
| Parametric EQ |
None |
| Semi-Parametric EQ |
None |
| Filters |
Low-Pass:
90 Hz / 120 Hz |
| Dynamic Processing |
Fast Limiter |
| Alignment Delay |
None |
| Phase Adjustment |
Yes |
| Digital Signal Processing |
Delay |
| AC Input Power |
Factory Selectable:
100 to 120 VAC, 50 / 60 Hz (T 10 A H 250 V) |
| AC Power Connector |
1 x powerCON Input (Locking)
1 x powerCON Output (Locking) |
| Handles |
1 x Each Side |
| Cooling |
Convection |
| Construction Material |
Plywood |
| Certifications |
CE
*as per Manufacturer |
| Dimensions |
27.6 to 22 x 27.6" / 700 to 558 x 700 mm |
| Weight |
123 lb / 55.8 kg |
|
Reviews
There are no reviews yet.