| Content |
- 2-way powered loudspeaker with a 2” HF and a 15" LF
- Maximum 139dB SPL and 34Hz-20kHz frequency range is ideal for today\'s professional audio demands
- High power 2000W Class-D amplifier module
- 96kHz DSP and FIR filter for true high-resolution sound with super low latency
- Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
- Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
- D-Contour and highly reliable protection circuits
- Floor monitoring setting enables mirroring configuration
- Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
- Optional speaker cover (SPCVR-DZR15)
- Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 44Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 133dB
Horizontal Coverage Angle 60 Degrees Axisymmetric
Vertical Coverage Angle 60 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 32.1“
Width 17.5“
Depth 15.2“
Weight 64 lbs.
Manufacturer Part Number KW152 |
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
|
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 ACTIVE | | GENERAL INFO |
| | System type | Active 15" 2-way Bi-Amplified | | Frequency response +/- 3db | 50-20kHz | | HF SECTION |
| | Hf type | Titanium Compression Driver | | Horn dispersion (H x V) | 90° x 60° | | Hf exit size mm / inches | 25mm / 1“ | | PHYSICAL FEATURES |
| | Enclosure Material | Injection Moulded Polypropylene | | Enclosure Colour | Grey or White or Black | | Size (mm/inches) | 381mm / 15“ | | IN / OUT PANEL (speaker Level) |
| | Input connector | XLR - 1/ 4" Combo jack | | AMPLIFIER POWER |
| | Power On Protection | Power switch on / off mute | | Thermal Protection | Amplifier shutdown, auto reset | | Low Line Voltage Shut Down | 60% Nominal line voltage | | Driver Protection | Independent LF and HF limiters | | DC Protection | Yes | | Short Protection | Yes | | Controls | High (±10dB) 10kHz Shelving | | Dimensions (HxWxD) |
| | mm | 708.3mm x 477.8mm x 401.77mm | | inches | 27.9" x 18.8" x 15.8“ | | Microphone / Transmitter |
| | Maximum Input Level | +22dBu | | Impedance | 4 Ω | | MIXER MODEL |
| | INPUT IMPEDANCE | Balanced: 20k ohms Unbalanced: 10k ohms | | Clip Limiter | Turns on approx 350W output | | Limiter Indicator | Red LED | | Power Indicator | Red LED | | AC Power details |
| | Power Supply | High Efficiency Switching Mode Power Supply | | AC Power Options | AC100~120V / 220~240V, 50 / 60Hz | | Power On Indicator | LED | | Rigging / Bracket / | 10 M8 threaded inserts including 4 | | Mounting Options | M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket | | Impedance Balanced | Balanced: 1k ohm - Unbalanced: 500 ohm | | Line Output |
| | Line Output Connector | Switchable LOOP / MIX Balanced Male XLR | | Input A - type | Switchable balanced mic or line level input | | Input Sensitivity | Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) | | Maximum Input Level | +22dBu | | Input Connector | XLR - 1/ 4" Combo jack | | Input Impedance | Balanced: 20k ohms Unbalanced: 10k ohms | | Input B - type | Line level input | | Input Sensitivity | XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) | | Maximum Input Level | +22dBu | | Input Connectors | Combo jack: 1/4" - XLR / Summed dual RCA jacks | | Bass Response Optimizer |
| | (“BRO“™) circuit | +5dB at 60Hz | | Subsonic Filter | 30Hz, Second-order filter | | Amplifiers |
| | Low-Frequency (Class D) | Rated 350W RMS, 700W Peak | | High- Frequency (Class A/B) | Rated 70W RMS, 140W Peak | | Electronic Crossover | 24dB/octave Linkwitz-Riley | | Crossover Frequency | 1.8kHz | | Controls | High (±10dB) 10kHz Shelving | | Equalization | Low (±10dB) 100Hz Shelving | | DIMENSIONS & WEIGHT |
| | Net weight ( kg / lbs ) | 23.7kg / 52.67lbs | | Gross weight ( kg / lbs ) | 26.94kg / 59.27lbs | |
| Features
400 Watt digital bi-amplification
128 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 128 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 15" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-Jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Connections: VDE
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 18.2/40.12 kg/lbs |
Features
- Compact full-range system
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points
The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness.
The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?
The Digital Signal Processsing (DSP) incorporated in the Avant series provides unparalleled control over the audio signal. Critical parameters have been fine tuned for each cabinet, yet their consistent sound "signature" allows them to perform seamlessly with other systems from the Avant family.
The 15AV4 loudspeaker designed and built by D.A.S. provides powerful low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm for exceptional perormance in all types of applications.
Technical Data
| Nominal LF Amplifier Power | 500 W | | Nominal HF Amplifier Power | 100 W | | Frequency Range (-10 dB) | 45 Hz-20 kHz (EQ Flat) | | Rated Peak SPL at 1 m | 133 dB | | Dispersion | 80ºH x 50ºV rotatable horn | | Enclosure Material | Plywood | | Color/Finish | Black/Paint | | Connectors | Input: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC | | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | | Current Draw (1/3 power @ 230 V) | 1.7 A | | Dimensions (H x W x D) | 83 x 44.8 x 47.6 cm
32.7 x 17.6 x 18.7 in | | Weight | 30 kg (66 lb) |
|
Reviews
There are no reviews yet.