Content | Powered Mixer with All You Need for the Gig
When sound reinforcement requirements get serious but you still want the convenience
and reliability of a Yamaha powered mixer, the console-style EMX5014C is the ticket.
It\'s an all-in-one solution that will appeal to gigging combos and venue operators alike.
It provides a surprising palette of features and versatile signal routing options. And it\'s
a Yamaha, so it\'s going to sound great.
Yamaha EMX5014C Powered Mixer Features:
Exclusive single-knob compressors on each input control unruly vocals
or tighten up a bass guitar
Feedback channel locator LEDs on each input pinpoint problems for
easy correction
80Hz high-pass filters for eliminating low-frequency noise and rumble
Channel ON switches let you switch individual channels into or out of the mix
PFL (Pre-Fader Listen) switches allow isolated monitoring of individual channels
All input channels feature signal and peak indicators for visual signal monitoring
Linear Aux 1, Aux 2, and Effect return faders with AFL (After-Fader Listen)
monitor switches
Stereo master fader with both PFL and AFL monitor switches
Limiter indicators tell you when the internal limiter circuitryhas been activated
due to power amplifier overload
Power amp mode selector allows 2-channel power amp to be quickly configured
for Main + Main, Mono + Aux 1, or Aux 1 + Aux 2 operation
Power amplifier output selector allows selection of 500, 200, or 75-watt output
per channel | 12-channel mixer section features 4 mono and 4 stereo channels, 2 additional stereo inputs plus separate Aux input. Effective, extremely musical 3-band EQ, switchable Low cut filter and Clip LEDs on all mono channels. Stereo 7-band graphic EQ. Ultra-compact 2 x 250-Watt (max) stereo powered mixer. Ultra-high quality KLARK TEKNIK FX processor with LCD display. "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included).
Brand |
BEHRINGER |
Model |
PMP500 |
Part Number |
000-AJY |
Input Mic |
6 |
Effect |
Yes |
Channels |
8 |
Console Type |
Powered |
Console Layout |
Horizontal |
Power (4 ohms) per channel |
130 |
Equalizer |
Yes |
Aux |
1 |
Application |
Portable PA |
Series |
EUROPOWER PMP series |
Warranty |
1 Year |
|
- FLS Feedback Locating System
- Master Mute for channels 1-7
- Footswitchable effects defeat
- Combination XLR and 1/4 input jacks
- RCA, 1/8" Media input
- Selectable 9-Band Graphic EQ with FLS
- Selectable Main or Monitor dual power section
- RCA Record outputs
- LED Meter bridge
- Digital effects parameter control
- Power amp sub-sonic filtering
- On-board 24- bit digital effects with mute button
- Clip light and signal present indicator
- Kosmos-C
- Main line level 1/4" output
- Mid-Morph EQ
- DDT Speaker protection circuit
- 48 Volt Phantom Power
- Bluetooth? streaming audio
- Weight Unpacked: 10.44 kg
- Weight Packed: 11.8 kg
- Width Packed: 35.56 cm
- Height Packed: 55.88 cm
- Depth Packed: 34.925 cm
|
The Phonic Powerpod Series are powered mixers in a compact and durable design. The Powerpod 415RW has four Mic/Line input channels and a built-in 150 Watt amplifier, as well as onboard USB module for recording and playback and Bluetooth Module for wireless audio streaming. The 2-band EQ on every channel gives you maximum control over your mix, and the Powerpod 415 RW's built-in variable digital delay allows users to better tweak their mix. Powerpod Series Powered Mixers are great all-in-one mixer/amplifiers for bands, traveling musicians, school auditoriums, houses of worship and clubs.
Features:
- Built-in 150W output power
- 4 Mic/Line input channels
- USB recorder and playback device for capturing all performances with ease
- Bluetooth audio streaming
- Variable digital delay with time and repeat control
- Main insert point via 1/4" TRS jack
- Super musical 2-band EQ on mono channels
Μic Input: | 1-6 | Power 4Ω: | 100W - 200W | Console Layout: | Vertical |
| PowerMate 1000
SPECIFICATIONS
Order No.
F01U131113 (DC-PM1000-3-UNIV)
Channels (Mono + Stereo)
6 + 4
Auxiliaries (MON, FX, AUX)
2 Pre, 2 Post, 2 Pre/Post switchable
Maximum Midband Output Power,1 kHz, THD=1%, Dual Channel
into 2.66 Ohms
2 x 1350 W
into 4 Ohms
2 x 1000 W
into 8 Ohms
2 x 600 W
Rated Output Power,THD=0.1%, Single Channel
into 4 Ohms
2 x 900 W
into 8 Ohms
2 x 450 W
Maximum Output Voltage of power amplifier, no load
74 Vrms
THD at 1kHz, MBW=80kHz
MIC input to Master A L/R output, +16 dBu, typical
< 0.005%
POWER AMP INPUTS to Speaker L/R output
< 0.075%
DIM 30, power amplifier, 60Hz, 7kHz
< 0.05%
IMD-SMPTE, power amplifier, 60Hz, 7 kHz
< 0.015% CMRR, MIC input, 1 kHz > 80 dB
Equivalent Input Noise, MIC Input, A-weighted, 150 Ω
-130 dBu
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ohms
105 dB
Output Stage Topology, amplifier
Class D
Equalization
LO Shelving
+/- 15 dB / 60 Hz
MID Peaking, mono inputs
+/- 15 dB / 100 Hz .. 8 kHz
MID Peaking, stereo inputs
+/- 12 dB / 2.4 kHz
HI Shelving
+/- 15 dB / 12 kHz
Master EQ, 11-band (63, 125, 250, 400, 1k, 1.6k, 2.5k, 4k, 6.3k, 12k Hz)
+/- 10 dB / Q = 1.5-2.5
Filter
LO-CUT, mono inputs
f=80 Hz, 18 dB/oct
VOICE FILTER, mono inputs
FEEDBACK FILTER, MON1/2
70 Hz .. 7 kHz, Notch, -9 dB
Speaker Processing
LPN, switchable
Display
High Contrast OLED
Effects |
300W 6 CHANNEL POWERED MIXER WITH USB RECORDER AND BLUETOOTH
The Phonic Powerpod 630 RW powered mixer is a versatile front of house PA mixer built into a compact and durable molded cabinet. Each Powerpod 630 RW has a built-in stereo amplifier which is bridgeable and patchable. Super Hi-Z inputs allow for the addition of guitars and other instruments. A USB recorder/player is also incorporated into the unit, allowing the main mix to be captured onto any standard USB storage device. The units also offer high definition digital effects with 16 preset programs, each with it\'s own user-definable parameter. The 2-band EQ on every channel and dual multi-band graphic EQ with selectable In/Out switches give you maximum control over your mix. Further more, Powerpod 630 RW has a built-in Bluetooth module offering audio streaming from Bluetooth-enabled mobile device.
Features:
- Built-in 2 x 150W / 4 ohms dual power amplifier for Main or Main/Monitor (Bridge mono, 300W / 8 ohms)
- 32/40-bit digital multi-effect processor with 16 programs plus parameter control and footswitch jack
- Six balanced Mic inputs and eight Line inputs (4 mono, 2 stereo channels)
- Two Super Hi-Z inputs optimized for direct instrument input
- 2-band EQ on each input channel
- 7-band master graphic EQ
- Pad control on channels 1 to 4
- AUX input
- Stereo RCA I/O
- +48V phantom power on channels 1 through 4
- Built-in limiters
- Monitor and effect sends on each input channel
- Drive level / effect out master control for signals sent to effect processor
- USB recorder/player
- Bluetooth audio streaming
Μic Input: |
1-6 |
Power 4Ω: |
200W - 300W |
Console Layout: |
Vertical |
|
Reviews
There are no reviews yet.