Content |
Power and Options...
The Apogee X-Series FireWire Card gives you the power and convenience of a
direct connection to any FireWire equipped computer. The X-FireWire Card uses
an expansion slot in the ROSETTA 800 to give users of Logic, Nuendo and other
popular software the option of amazing sounding Apogee conversion. Using Apple?s
Core Audio FireWire driver for Macintosh and ASIO drivers for Windows, your
hardware options for your DAW are greatly expanded.
eXpandability...
The two ports on the Apogee X-FireWire Card allow you to daisy-chain additional
devices to create an entire system. By extending the bus, the X-FireWire card
allows for daisy-chaining of multiple Apogee systems or compatible peripherals,
and permits the use of multiple FireWire devices by computers with only one port.
The card also passes power through the FireWire ports to allow the powering of
additional devices. (Note: This feature is available for Windows systems only at this time).
Get Connected
With and X-FireWire card installed in an AD-16X, DA-16X, Rosetta 200 or Rosetta 800
you have the power of a professional FireWire connection to your favorite DAW: Logic 7,
Nuendo, Cubase, Cakewalk, Live or virtually any native audio production software.
Low Latency with FireMix
FireMix is a mixer application that allows control and creation of customizable sub-mixes
for low latency performance in the native environment. FireMix features accurate input and
output metering, 16bit fader control, and eight 48bit mix busses with enough DSP headroom
to insure that there are no compromises to the audio quality. FireMix also has customizable
pan control and key modifier user preferences to allow FireMix to operate in the same manner
as your favorite audio application. With FireMix, you will get low latency monitoring, have the
ability to save and recall all of your mixes, group and ungroup master faders all with little to no
impact on your CPU performance.
Features:
* 2, S400 FireWire connectors, allowing convenient chaining of multiple units
* Compatible with Apple's OS X built-in FireWire Core Audio driver
* Supplied with Windows XP WDM/ASIO driver
* Up to 8x8 24bit at 88.2/96k
* Up to 4x4 24-bit channels at 176.4/192KHz
* Fully compliant and compatible with 61883-6 and other relevant 1394 IEEE
and AES specifications
* Allows low-jitter synchronization to a FireWire audio network and can provide
a master clock source for a FireWire audio network
|
Laptop USB Input Digital to Analog Audio Converter with Bass and Volume Adjustment,DAC Digital Audio SPDIF Optical to Analog RCA and 3.5 mm Jack, Optical to RCA for PS4 Xbox HDTV DVD
1. This DAC supports digital PCM audio format,PLS kindly set your digital audio device such as HDTV, TV BOX, or game console into PCM or LPCM audio before using, NOT support DTS Dolby AC3. PCM Setting Path: Device homepage -- system setting -- image and sound -- voice setting -- digital audio output -- PCM
2. If you are connecting to Samsung or LG TV,please follow the steps below to set it up:Samsung TV settings path:(1)PCM format: Settings--Sound--Expert Settings--Audio Format--PCM;(2)External speakers:Settings--Sound--Select Speaker--Optical B.LG;TV setting path:(1)PCM setting path:Menu--All Settings--Sound Out--Optical--Digital Sound Out--PCM;(2)If you need to synchronize the output of the TV speakers and fiber:Menu--All Settings--Sound Out--Optical--Internal TV Speaker+Optical
3. Power charging: USB Power Cable--seperate 5V 1A Standard Plug--wall socket. Do Not Power Converter by plugging in USB cable into your TV directly (unstable power supply which cause buzzing noise). If the volume (from DAC output) is not loud enough, please connect the output of DAC with low-impedance cellphone headset, headphone amplifier, or power amplifier.
4. Not compatible with Netflix and YouTube video websites. Before power on, you must turn the adjustment knob counterclockwise to minimize the volume to avoid damage to your hearing! Not support USB flash disk!
5. This product is specially designed for professional audio signal processing,can convert the digital audio signal of input of coaxial or optical interface to analog stereo audio signal of RCA interface and 3.5mm headphone jack.The built-in professional audio amplifier chip and volume adjustment knob can directly drive the headphones and adjust volume.The product's bass adjustment function can provide powerful stereo,heavy bass effects,and create a environment different from the sound field.Features:
Connect to DVD, HD player and other devices
Eliminate the noise when there is no input signal, and automatically mute when the non-audio signal is input.
Support 192kHz 24bit sampling rate.
Metal shell, anti-interference
Support Audio Format: PCM
Separating Degree(1KHZ): 94DB
Response Frequency: 20Hz~20KHz -0.2db
Signal-to-Noise Ratio(SNR): -100DB
Total Harmonic Distortion(THD+N): 10Hz~20KHz 0.25-0.065%
Blocking Time: 0.577Fs
Sampling Rate: 32~192 KHz
Bit Rate: 16~24 Bit
Earphone output level(Adjust the bass to maximum):3V
RCA output level(Adjust the bass to maximum): 9V
Earphone Output Power(Adjust the bass tomaximum): (32 ohm)30mW
Earphone Output Impedance: 0.8 ohm
RCA Output Impedance: 450 ohm
Working Voltage: +5V
Maximum Voltage: +6V
Maximum Power Consumption: 75mA
Operating Temperature Range: -10-70℃
Storage Temperature Range: -60-150℃
Operating Humidity Range: 10% - 80%RH(No Condensation)
Storage Humidity Range:5- 90%RH(No Condensation)
colour: black
Material: metal
Size: 10x9.5x1.6CMPackage Contents:
1 x Host
1 x USB power cord
1 x USBA male cable
1 x Optical cable
1 x English manualOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
The Rosetta 200, Apogees successor to the PSX-100 and Rosetta AD namesake,
delivers the quality of the popular Rosetta 800, in a 2-channel AD/DA solution. Like
the Rosetta 800, the 200 features premium Apogee A/D and D/A conversion, 192k
sampling rates (standard), optional Pro Tools HD, Mix and FireWire expansion cards
and core Apogee technologies such as UV22HR, and SoftLimit. And while the
Rosetta 200 shares much of its feature set with its cousin, it throws in some irresistible
extras such as the new, CODA, Audio Finishing Module, full channel metering, and
MIDI and S/PDIF input and output. Flexibility and features galore make the Rosetta 200
an outstanding option for professional and project studios, mastering engineers, and
audio archivists.
Features:
Channels of premium 24-bit AD/DA conversion
Sample rates up to 192kHz with Apogee's "Intelliclock"
2 channels of AES, S/PDIF (coax & optical), and ADAT/SMUX I/O MIDI I/O
Optional FireWire expansion card for compatibility with OS X, and
Windows XP (X-FireWire card)
Optional expansion card for direct connection to Pro Tools HD & Mix systems
(X-HD card, X-Digi-Mix card)
“Soft Limit" for maximum digital level without overs
CODA: The Aptomizer Level Normalizer, Sample Rate Conversion (SRC), and
Apogees UV22HR for superior dither to 16-bit
Full channel metering
|
- Stereo D/A Converter
- Supports up to 24-Bit/96 kHz Resolution
- Dante-Enabled Ethernet Input
- Balanced Analog XLR Outputs
- Adjustable Output Level
- 3.5mm Stereo Headphone Output
- 14-Gauge Steel Enclosure
- Sync and Power Indicators
|
The Apogee AES-8-DIGI-IFC Multi-Channel Digital Cable System is an eight channel AES/EBU* input/output connection designed to interface the Apogee Rosetta 800 to a Digidesign 192's AES/EBU connection via DB-25 multipin connectors on both ends with metal shells for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumb screws are 2.6mm. |
The new Fostex HP-A3 is the perfect DAC for Computer Audio. This high quality unit features 32bit D/A Conversion with an integrated headphone amplifier exclusively designed to get the most from and PC audio set-up.
Why settle for 'built-in' D/A conversion when you can drastically improve the quality of your audio with a Fostex HP-A3?
32bit D/A Converter USB Bus power without using unwanted AC adapterWorks with up to 24bit/96kHz audio sourceHigh quality analog headphone amp to drive any type of headphonesEquipped with high-grade AKM 32bit DAC AK4390 - USB Bus power without using unwanted AC adapter
- Works with up to 24bit/96kHz audio source
- Exclusive PLL power supply is built in to reproduce the stable electrical supply
- High quality analog headphone amp to drive any type of headphones
- Equipped with hgih-grade AKM 32bit(*) DAC AK4390
- Condensers and OP amp designed exclusively for audio products
- USB / Digital (Optical) input selector
- Headphones / RCA (Analog) output selector
- Doubles as D/D converter from USB digital audio to Optical
- An USB/AC adapter from the shelf can be used for use as an Optical / Analog converter
Note: When using the USB input, the sampling frequency is fixed at 96kHz. Audio file with Fs 32k/44.1k/48kHz will be reproduced by upsampling to 96kHz and the S/PDIF Out is also fixed at 96kHz.
Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)
Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)
General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g
|
Reviews
There are no reviews yet.